• 한국전산구조공학회논문집
• /
• 제24권6호
• /
• pp.715-722
• /
• 2011

본 논문에서는 항공기 충돌에 의한 원전 격납건물의 거동을 병렬해석을 통해 수행하였다. 지금까지의 원전 격납건물에 대한 항공기 충돌관련 연구는 항공기의 경우, Riera의 충격하중-시간함수를 이상화하여 대상 구조체의 일정영역에 대해 충격하중으로 적용하는 방법을 사용해 왔고 충돌대상 구조체의 경우, 단순 철근콘크리트 벽체나 빌딩에 머물러 왔다. 하지만 본 논문에서는 항공기(Boeing-767, http://www.boeing.com)와 가상의 원전 격납건물을 실제와 유사하게 모델링하여 해석을 수행하였으며, 항공기모델은 충돌평가 가이드인 NEI 07-13(2009)에서 허용하는 Riera의 식에 따른 충돌하중이력곡선과 비교하는 방법으로 검증되었다. 또한, 일반적으로 고속 충돌해석은 짧은 시간동안 두 개 이상의 물체가 접촉하고 동적 대변형을 일으키는 비선형성이 강한 문제로 많은 계산시간이 요구되기 때문에 이를 효과적으로 다루기 위해서는 단일 CPU만으로는 한계가 있다. 따라서 본 논문에서는 해석의 효율성을 향상시키기 위해 자체 구축한 리눅스 클러스터 시스템을 이용하여 Message-Passing MIMD 형태의 병렬해석을 수행하였고 병렬성능에 대한 평가를 위해 무근콘크리트(Plain Concrete, PC), 철근콘크리트(Reinforced Concrete, RC), 내부 Liner Plate를 부착한 철근콘크리트(RC with Containment Liner Plate, CLP), SC구조(Steel-Plate Concrete, SC)등 4가지 경우에 대한 수치해석 효율성이 비교 검토되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1098-1102
• /
• 2008

To increase the ink transfer rate in the micro-gravure-offset printing, the liquid transfer process between two separating plates is investigated. During the liquid transfer process, in which one plate is fixed and the other one moves vertically, a sessile droplet is separated into two droplets. The volume ratio of the two droplets depends on the contact angles of the two plates. In a numerical study of the ink transfer processes, liquid transfer between two parallel separating plates and between a trapezoidal cavity and an upward moving plate are simulated, as models of the printing of ink from the offset pad onto the substrate and the picking up of ink from the gravure plate by the offset pad, respectively. Also, in experimental study, to obtain various surface contact angles, chemical treatment, plasma treatment, and electrowetting- on-dielectric (EWOD) surface are considered. The transfer rate between two plates is calculated by analyzing the droplet images. From the results, the optimal surface contact angles of the units of the micro-gravure-offset printing can be characterized.

• 대한기계학회논문집
• /
• 제15권2호
• /
• pp.644-653
• /
• 1991

A wave instability problem is formulated for natural convection flows adjacent to a inclined isothermal surface in pure water near the density extremum. It accounts for the nonparallelism of the basic flow and temperature fields. Numerical solutions of the hydrodynamic stability equations constitute a two-point boundary value problem which are accurately solved using a computer code COLSYS. Neutral stability results for Prandtl number of 11.6 are obtained for various angles of inclination of a surface in the range from-10 to 30 deg. The neutral stability curves are systematically shifted toward modified Grashof number G=0 as one proceeds from downward-facing inclined plate(.gamma.<0.deg.) to upward-facing inclined plate (.gamma.>0.deg.). Namely, an increase in the positive angle of inclination always cause the flows to be significantly more unstable. The present results are compared with the results for the parallel flow model. The nonparallel flow model has, in general, a higher critical Grashof number than does the parallel flow model. But the neutral stability curves retain their characteristic shapes.

• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.435-442
• /
• 2000

The present study is conducted to investigate the local heat/mass transfer characteristics for flow through perforated plates. A naphthalene sublimation method is employed to determine the local heat/mass transfer coefficients on the effusion plate. Two parallel perforated plates are arranged for the two different ways: staggered and shifted in one direction. The experiments are conducted for hole pitch-to-diameter ratios of 6.0, for gap distance between the perforated plates of 0.33 to 10 hole diameters, and for Reynolds numbers of 5,000 to 12,000. The result shows that the high transfer region is formed at stagnation region and at the mid-line of the adjacent impinging jets due to secondary vortices and flow acceleration to the effusion hole. For flows through the perforated plates, the mass transfer rates on the surface of the effusion plate are about six to ten times higher than for effusion cooling alone (single perforated plate). More uniform and higher heat/mass transfer characteristic is obtained in overall region with small gap between two perforated plates.

• Smart Structures and Systems
• /
• 제11권1호
• /
• pp.35-51
• /
• 2013

Over the last two decades Wavelet Transformation (WT) method has been widely utilized for the damage identification of structures. The main objective of this paper is to discuss and present some of common shortcomings and limitations of mathematical software, as well as other precautionary measures that need to be considered when using them for wavelet analysis applications. Due to popular usage of MATLABMATLAB(R) comparing to other mathematical tools among researchers for data processing of structural responses through WT analysis, this software was chosen for specific study. To the best of the authors' knowledge, these limitations and observations have not been previously identified or discussed in the literature. In this work, a square plate with a severe damage, in form of a crack, parallel to the left edge of the plate is selected for a pilot study. The steady state harmonic response is used for measuring the deflection shape across the line parallel to one edge and perpendicular to the damage. Several criteria and cases such as the smallest size damage that can be detected, correlation between the crack width and the number of sampling points, and the influence of the damage thickness on the accuracy of the result are investigated.

• Environmental Engineering Research
• /
• 제25권2호
• /
• pp.238-242
• /
• 2020

Sediment microbial fuel cells (SMFCs) illustrated great potential for powering environmental sensors and bioremediation of sediments. In the present study, array anodes for SMFCs were fabricated with graphite rods as anode material and stainless steel plate as electric current collector to make it inconvenient to in situ settle down and not feasible for large-scale application. The results demonstrated that maximum power of 89.4 ㎼ was obtained from three graphite rods, twice of 43.3 ㎼ for two graphite rods. Electrochemical impedance spectroscopy revealed that three graphite rods resulted in anodic resistance of 61.2 Ω, relative to 76.0 Ω of two graphite rods. It was probably caused by the parallel connection of the graphite rods, as well as more biomass which could reduce the charge transfer resistance of the biofilm anode. The presently designed array configuration possesses the advantages of easy to enlarge the surface area, decrease in anodic resistance because of the parallel connection of each graphite rod, and convenience to berry into sediment by gravity. Therefore, the as prepared array node would be an effective method to fabricate large-scale SMFC and make it easy to in situ applicate in natural sediments.

• 문화기술의 융합
• /
• 제9권4호
• /
• pp.331-335
• /
• 2023

혈액의 점도가 높아질수록 혈액은 더 끈적하고 흐름이 어려워지므로 혈전의 발생 가능성이 높아져 허혈성 뇌경색의 발생 확률이 증가한다. 혈액 점도 측정은 최근 순환기계 질환의 예방을 위하여 그 중요성이 강조되고 있으며 혈액의 점도를 쉽고 정확하게 측정할 수 있는 점도계의 필요성이 대두되고 있다. 본 연구에서는 평행판 점도계 ARS-Medi에 의한 점도표준액과 인공혈액의 측정값들을 국제적으로 정확성과 신뢰성을 인정받는 TA instrument의 Ares-G2로 측정한 값들과 비교하였다.. 뉴턴성 용액인 N44 표준용액의 점도는 모든 전단율에서 두 기기 간에 거의 완벽하게 일치하였다, 비뉴턴성 용액인 인공혈액의 경우 가장 낮은 전단율인 1 rad/s 에서는 약 10%의 차이를 보였으나, 임상적으로 유의한 전단율인 10 rad/s 이상에서는 두 기기간의 측정값이 오차범위 내에서 모두 일치하였다. 우리는 새로 개발한 혈액 전용 평행판형 점도계 ARS-Medi가 1회용 평행판을 사용하므로 혈액 점도 측정의 편의성과 위생성이 향상되어 임상에 매우 유용할 것으로 기대한다.

• Structural Engineering and Mechanics
• /
• 제16권5호
• /
• pp.627-641
• /
• 2003

The structural intensity fields of rectangular plates with single cutout and multiple cutouts are studied. The main objective is to examine the effect of the presence of cutouts on the flow pattern of vibrational energy from the source to the sink on a rectangular plate. The computation of the structural intensity is carried out using the finite element method. The magnitude of energy flow is significantly larger at the edges on the plate near the cutout boundary parallel to the energy flow. The effects of cutouts with different shape and size at different positions on structural intensity of a rectangular plate are presented and discussed. A case study on a plate with two cutouts is also presented.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.31-38
• /
• 2003

Line heating is an effective and economical process for forming flat metal plates into three-dimensional shapes for plating of ships. Because the nature of the line heating process is a transient thermal process, followed by a thermo elastic plastic stress field, predicting deformed shapes of plate is very difficult and complex problem. In this paper, neural network model o3r solving the inverse problem of metal forming is proposed. The backpropagation neural network systems for determining line-heating positions from object shape of plate are reported in this paper. Two cases of the network are constructed-the first case has 18 lines which have different positions and directions and the second case has 10 parallel heating lines. The input data are vertical displacements of plate and the output data are selected heating lines. The train sets of neural network are obtained by using an analytical solution that predicts plate deformations in line heating process. This method shows the feasibility that the neural network can be used to determine the heating-line positions in line heating process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1196-1200
• /
• 2004

Micropump is very useful component in micro/nano fluidics and bioMEMS applications. In this study, a bubble-powered micropump was fabricated and tested. The micropump consists of two-parallel micro line heaters, a pair of nozzle-diffuser flow controller and a 1 mm in diameter, 400 ${\mu}m$ in depth pumping chamber. The two-parallel micro line heaters with 20 ${\mu}m-width$ and 200 ${\mu}m-length$ were fabricated to be embedded in the silicon dioxide layer of a wafer which serves as a base plate for the micropump. The pumping chamber, the pair of nozzle-diffuser unit and microchannels including the liquid inlet and outlet port were fabricated by etching through another silicon wafer. A glass wafer (thickness of $525{\pm}15$ ${\mu}m$) having two holes of inlet and outlet ports of liquid serve as upper plate of the pump. Finally the silicon wafer of the base plate, the silicon wafer of pumping chamber and the glass wafer were aligned and bonded (Si-Si bonding and anodic bonding). A sequential photograph of bubble nucleation, growth and collapse was visualized by CCD camera. Clearly liquid flow through the nozzle during the period of bubble growth and slight back flow of liquid at the end of collapsing period can be seen. The mass flow rate was found to be dependent on the duty ratio and the operation frequency. As duty ratio increases, flow rate decreases gradually when the duty ratio exceeds 60%. Also as the operation frequency increases, the flow rate of the micropump decreases slightly.