• Journal of Fashion Business
• /
• v.14 no.2
• /
• pp.57-72
• /
• 2010

The purposes of the research were to find out the clothing construction factors of the mechanical industry working clothes by analyzing the working clothes supplied to 5 subject companies; and to suggest the optimized sewing conditions and the seam strength and elongation experimental data according to the clothing material and seam types implied to the working clothes collected. The fabric types and trimmings used for the mechanical manufacturing working clothes were Polyester/Cotton(65/35%), Polyester/Rayon(65/35%), Cotton(100%); and linings, interlining, various fastenings etc. 2 stitch types, i.e. lock and two-thread chain stitches were applied to the construction of the flat, lap felled, French, superimposed, lapped and bound seams for the seam strength and elongation experiment. The results derived from the experiment were as follows. (1) The seam strength results according to the seam types were high in the order of lap felled>lapped>flat, superimposed and French seams. (2) Considering the features of the seam construction, as the number of fabric layers at the seam line increased the seam strength also increased. (3) Apart from the highest seam strength from the experiment using the net lining with the main fabric, the seam construction consisting of two fabric layers with the interlining showed relatively high seam strength results. (4) The seam elongations according to the stitch types were high in the order of two-thread chain>lock stitches.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2701-2706
• /
• 2003

This paper describes weld seam tracking and error compensation methods of automatic plasma arc welding system designed for the corrugation panel that consists of a linear section and a curved section with various curvatures. Realizing automatic welding system, we are faced with two problems. One is a precise seam tracking and the other is an arc length control. Due to the complexity of the panel shape, it is difficult to find a seam and operate a torch manually in the welding process. So, laser vision sensor for seam tracking is equipped for sensing the seam position and controlling the height of a torch automatically. To attain more precise measurement of an arc length, we measure the 3D shape of the panel and analyze error factors according to the various panel states and caused errors are predicted through the welding process. Using that result, compensation algorithm is added to that of arc length control and real time error compensation is achieved. The result shows that these two methods work effectively.

• Fashion & Textile Research Journal
• /
• v.13 no.3
• /
• pp.418-424
• /
• 2011

The purpose of this study was to reveal the effects of the seam type on the fabric drape to provide the basic knowledge for proper seam type according to the design of sewing products. Seven kinds of specimens were constructed with seam (no seam, welt seam with over-edged finish, welt seam with bias bound finish, plain seam with over-edged finish, plain seam with bias bound finish, french seam, and flat fell seam) in wrap direction of the fabric. Using a drape measurement system involving two 18 cm diameter supporting disks, and a digital camera, the images of draped specimens were captured and processed. Drape behavior was evaluated in terms of drape coefficient, node number, and drape profile. Significant differences were found in drape coefficient by the seam types. The specimens with french seam and flat fell seam showed higher drape coefficients compared to those with welt seam and plain seam. Node numbers in the drape profiles showed positive correlation with the weight of the specimens, however, no significant differences were observed in node numbers by the seam types. Significant differences were found in the length of the seamed part by the seam types. The specimens with french seam and flat fell seam showed longer length of the seamed part compared to those with welt seam and plain seam. The ratio of the maximum length in the seam direction to the maximum length perpendicular to the seam direction showed significant differences by the seam types.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.46-55
• /
• 2021

Seam puckering and the seam strength of conductive threads used to produce smart clothing were analyzed according to stitching methods and fabrics. Samples were prepared in a lock stitch and zigzag stitch on plain woven and jersey knit fabric, using one type of polyester sewing thread and three types of commercial conductive threads that consisted of two types of stainless-steel conductive threads (TST and MST) and one type of silver conductive thread (SSV). Seam pucker percentages, shapes, and seam strength were measured. On plain woven fabric as well as jersey knit fabric, three-ply TST and MST showed a higher SP percentage compared to a polyester sewing thread. Meanwhile, single-ply SSV showed the lowest SP percentage. In addition, the SP percentage of the zigzag stitch decreased along the weft and course directions of the fabric, and decreased significantly as the number of fabric layers increased. Moreover, there was a marked tendency for a higher SP percentage in jersey knit fabric compared to plain woven fabric, and the two-dimensional cross-section waveforms of stitches obtained using three-dimensional data that showed increased irregular waveforms and peaks in the zigzag stitch. There were no correlations between seam strength and tensile strength.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.2
• /
• pp.30-38
• /
• 2003

This paper proposed PID controller for torch slider and PD controller for motor right wheel. to control the motion of two-wheeled welding mobile robot with seam tracking sensor touched on welding line. The motion control is realized in the view of keeping constant welding velocity and precise seam tracking even though the target welding line is on straight line or curved line. The position and direction of the body of the mottle robot are controlled by using signal errors between seam tracking sensor and body positioning sensor attached on the end of torch slider and body side of the mobile robot, respectively. In turning motion, the body and the torch slider are controlled by using the kinematic model related with two motions of body turning and torch sliding. The straight locomotion is controlled according to eleven control patterns obtained from displacements between two sensors of the seam tracking sensor and the body positioning sensor. The effectiveness is proven through the experimental results fur lattice type welding line. Through the experimental results, we can see that the position value of the electrode end point and the welding velocity are controlled almost constantly both in straight and turning locomotion.

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.453-459
• /
• 2009

The purpose of this study was to provide the basic knowledge to determine the proper seam finish according to the design of sewing products. Four seam finishes(no seam finishes, over-edged seam finishes, turned-and-stitched seam finishes, and bias-bound seam finishes) were constructed with seams in warp, weft and bias directions of the fabric. Using a drape measurement system involving two 18cm diameter supporting disks and a digital camera, the images of draped specimens were captured and processed. Drape behavior was evaluated in terms of drape coefficient, node number, and drape profile. Drape coefficients of the fabrics increased with seam formation and varied by the seam finishes, however no significant differences in drape coefficients by the seam finishes were observed on the heavier fabric. Node numbers of heavier fabric were more deeply affected by the seam finishes than those of lighter fabric. The specimens with turned-and-stitched seam finishes and bias-bound seam finishes showed significantly smaller node numbers compared to the specimens with no seam finishes and over-edged seam finishes on heavier fabric. The length of the seamed part showed positive correlation with the weight of the specimens and negative correlation with the number of nodes in each seam direction. The maximum length of all draped specimens was found in the same direction as the seam direction. In the case of the lighter fabric, the seam and the seam finish had a great influence on the shape of the draped profile.

• Fibers and Polymers
• /
• v.4 no.2
• /
• pp.71-76
• /
• 2003

We evaluated the seam characteristics with finishing, seaming and sealing processes and seam Puckering behavior of the breathable waterproof fabrics with laser scan. There were differences in 99% significant level between the seamed fabric and the sealed fabric. Seam breakage was initiated with the breakage of sewing thread, so the seam strength after seaming was almost uniform. The sewn seam strength and elongation increased with sealing process in all finishing methods. Pucker grade of laminating type was generally much higher than that of the coating type. We confirmed that wave length and amplitude have more important meaning than the number of weave in the breathable waterproof fabrics. The puckering in breathable waterproof fabrics is mainly occurred by inherent and feeding pucker. The former if due to the insertion of sewing thread and the littler is caused by differential feeding when two pieces of fabric are fed into the gap between a press foot and needle plate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.10
• /
• pp.3538-3556
• /
• 2014

This paper proposes a novel video stitching method that improves real-time performance and visual quality of a multi-camera video surveillance system. A two-stage seam searching algorithm based on enhanced dynamic programming is proposed. It can obtain satisfactory result and achieve better real-time performance than traditional seam-searching methods. The experiments show that the computing time is reduced by 66.4% using the proposed algorithm compared with enhanced dynamic programming, while the seam-searching accuracy is maintained. A real-time local update scheme reduces the deformation effect caused by moving objects passing through the seam, and a seam-based local color transfer model is constructed and applied to achieve smooth transition in the overlapped area, and overcome the traditional pixel blending methods. The effectiveness of the proposed method is proved in the experiements.

• Transactions of Materials Processing
• /
• v.9 no.6
• /
• pp.582-589
• /
• 2000

In recent automotive industry, vehicle weight can be reduced by one-step forming of tailored blanks welded with two or more sheets of metal blanks. Mash seam welding shows an overlap joint, a much wider welding area, and heat affected zone(HAZ) than a laser welding. This paper deals with the forming characteristics of mash seam welded tailored blanks. Mash seam welded blanks of same or different thickness combinations were prepared, and tensile, hardness, erichsen, and dome stretching tests were done.

• Fashion & Textile Research Journal
• /
• v.2 no.2
• /
• pp.146-149
• /
• 2000

This study has been investigated the comparison of the seam strength of hand sewing with machine sewing using two kinds of sewing thread. On machine sewing, thread is used for sale, on hand sewing, thread is used for every fabric weft yarn. Breaking strength, efficiency and breaking mode of seams were examined under various sewing conditions using three kinds of fabric and three kinds of stitch type. The results obtained are as follows: The seam strength is not affected by sewing mechanism, but affected by a breaking mode : The type of slipped mode has a higher seam strength of hand sewing than that of machine sewing. When fabrics and threads were broken by a higher seam strength of machine sewing than that of hand sewing. Fabrics having low density using plain seam slipped more easily, so seam strength was greatly lesser. Fabrics having higher density had higher to seam strength. We should choose appropriate seams based on production, economy and aesthetics.