• Korean Journal of Remote Sensing
• /
• v.36 no.6_3
• /
• pp.1681-1690
• /
• 2020

A scanning lidar system has been developed. The system has two wavelength observation channels of 532 and 1064 nm and is capable of 360-degree horizontal scanning observation. In addition, an analysis method that can classify the measured particle as an indicator of coarse-mode particle (PM2.5-10) and an indicator of fine-mode particles (PM2.5) and calculate the mass concentration of each has been developed by using the backscatter coefficient at two wavelengths. It was applied to the data calculated by observation. The mass concentrations of PM10 and PM2.5, which showed a distribution of 22-110 ㎍/㎥ and 7-78 ㎍/㎥, respectively, were successfully calculated in the Ulsan Onsan Industrial Complex using the developed scanning lidar system. The analyzed results showed similar values to the mass concentrations measured on the ground around the lidar observation area, and it was confirmed that high concentrations of 80-110 ㎍/㎥ and 60-78 ㎍/㎥ were measured at points discharged from factories, respectively.

• Wind and Structures
• /
• v.21 no.1
• /
• pp.63-84
• /
• 2015

The shape of a tall building has significant impact on wind force generation and wind-induced dynamic response. To study the effect of recessed cavities, wind excitations on a wind-tunnel model of an H-section tall building were compared with those on a square-section building model. Characteristics of the fluctuating wind pressures on the side faces of the two tall buildings and their role in the generation of crosswind forces on the buildings were investigated with the space-time statistical tool of proper orthogonal decomposition (POD). This paper also compares the use of different pressure data sets for POD analysis in situations where pressures on two different surfaces are responsible for the generation of a wind force. The first POD mode is found to dominate the generation of crosswind excitation on the buildings.

• Computers and Concrete
• /
• v.7 no.4
• /
• pp.331-346
• /
• 2010

We present a quadrilateral finite element with an embedded crack that can be used to model tensile fracture in two-dimensional concrete solids and the crack growth. The element has kinematics that can represent linear jumps in both normal and tangential displacements along the crack line. The cohesive law in the crack is based on rigid-plasticity with softening. The required material data for the concrete failure analysis are the constants of isotropic elasticity and the mode I softening curve. The results of two well known tests are presented in order to illustrate very satisfying performance of the presented approach to simulate failure of concrete solids.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.794-796
• /
• 2000

This paper analyzes the method of cascading 74LS163 4-Bit Binary Counters. The 74LS163 4-Bit Binary Counter has synchronous LD. CLR functions and especially ENT, ENP, RCO to cascade some chips in order to count more 4bit binary number. The maximum operating frequency may vary according to the method of cascading. The Data sheet from Texas Instruments introduces two methods, The Ripple Carry Mode Circuit and The Carry Look Ahead Circuit, and shows that The Carry Look Ahead Circuit is more efficient than the other. However, there are only little information for user to understand and apply this to other circuits. Thus, we not only analyzed the two methods but also compared with each other in the point of performance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.1
• /
• pp.31-38
• /
• 2004

PMN-PT, a piezoelectric single crystal, has many useful applications such as sensors and actuators. In this paper, all the elastic, piezoelectric, and dielectric constants of the PMN-32％PT single crystals were measured by the resonance method. For the rhombohedral symmetry, a total of twelve independent material constants were measured such as six elastic compliance constants at constant electric field, two dielectric constants at constant stress, and four piezoelectric constants d. Seven sets of crystal samples of each different geometry were prepared for the measurement of length-thickness extensional, thickness extensional, radial, length extensional and thickness shear modes of vibration, respectively. In order to check the validity of the measurement, experimental impedance spectrum of the PMN-PT crystal was compared with numerical data spectrum calculated with the measured material constants. The good agreement between the two spectra confirmed validity of the results in this paper.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.355-355
• /
• 2006

In this study, we have applied principal component analysis-based 2D (PCA2D) correlation spectroscopy to the temperature-dependent IR spectra of biodegradable poly(hydroxyalkanoate). PCA2D analysis reveals clearly that there are two components in crystalline band of C=O stretching mode without being hampered by noise. To better understand the thermal behavior of biodegradable poly(hydroxyalkanoate), eigenvalue manipulating transformation (EMT) technique was also employed. By uniformly lowering the power of a set of eigenvalues associated with the original data, the subtle contributions from minor eigenvectors are highlighted. Details of thermal behavior of biodegradable poly(hydroxyalkanoate) studied by PCA2D correlation spectroscopy with EMT will be discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3132-3143
• /
• 1996

In the evaluation of Broadband-ISDN, the main issue is to interconnect existing LANs and MANs to B-ISDN based on Asynchrous Transfer Mode. However, LANs provide connectionless services, whereas the ATM network provides connection-oriented services. So some problem arises from accessing ATM switchs to transparently transmit connectionless data via B-ISDN. Two methods then were recommended by ITU-TS to support the connectionaless services. In the paper, we do the numerical analysis, using the stochastic fluid flow method, of dynamic bandwidth allocation sheme with two class traffics in the virtual path established between Interworking Units(JWUS) interconnecting LANs to an ATM network and Connectionless Servers(CLSs). The loss mechanism of each traffic is controlled by the contents of buffer. The vandwidth which the IWU requests the CLS is estimated by the number of On-Off sources in the On state. We use the stochsastic fluide flow method which is to find the steady-state joint probability in each level of the IWU buffer. The length of the IWU buffer as the real random variable is changed by traffics entering the IWU.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.3
• /
• pp.139-146
• /
• 2018

In recent years, a satellite navigation signal authentication technique has been introduced to determine the spoofing of commercial C/A code using the cross-correlation mode of GPS P(Y) code received at two receivers. This paper discusses the technical considerations in the implementation and application of authentication system simulator hardware to achieve the above technique. The configuration of the simulator consists of authentication system and user receiver. The synchronization of GPS signals received at two devices, data transmission and reception, and codeless correlation of P(Y) code were implemented. The simulation test result verified that spoofing detection using P(Y) codeless correlation could be achieved.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.368-373
• /
• 1996

A simple set of the transition criterion of the condensation regimes and the heat transfer coefficients on the direct contact condensation of the core makeup tank is developed, and implemented in RELAP5/MOD3.1 The condensation regimes are divided into two regimes: supply limit and condensation limit. In mode]ing the transition criterion between two regimes, a large-eddy model developed by Theofanous is used, and the empirical coefficient of the present large-eddy model is close to that of the large-eddy model. It turns out that the modified code better predicts the experimental data, especially the injection flow rate and the water level trend than the original code does.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.638-642
• /
• 2008

Computational methods based on the solution of the flow model are widely used for the analysis of lowspeed, inviscid, attached-flow problems. Most of such methods are based on the implementation of the internal Dirichlet boundary condition. In this paper, the time-domain panel method uses the piecewise constant source and doublet singularities. The present method utilizes the time-stepping loop to simulate the unsteady motion of the rotary wing blade. The wake geometry is calculated as part of the solution with no special treatment. To validate the results of aerodynamic characteristics, the typical blade was chosen such as, Caradonna-Tung blade and present results were compared with the experimental data and the other numerical results in the single blade condition and two blade condition. This isolated rotor blade model consisted of a two bladed rotor with untwisted, rectangular planform blade. Computed flow-field solutions were presented for various section of the blade in the hovering mode.