• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.131-138
• /
• 2008

This paper describes the implementations of the first application service based on embedded Linux; Mobile Teller which uses WiBro network for data communications and CDMA network for voice communications. Currently, with the appearance of WiBro service, dual-mode terminals which support two heterogeneous networks are available. But, the development of applications which effectively use these networks for providing better service to user is rarely prepared. At Mobile Teller, when a sender on a dual-mode terminal types texts, the texts are transmitted to a TTS server located in the Internet through WiBro network. Subsequently, the TTS server converts the texts into voices and transmits the voice data to the dual-mode terminal. At last the dual-mode terminal sends the voice to the receiver through the CDMA network. In case of noisy environment or when a user has difficulty in speaking, Mobile Teller makes voice communication possible

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.267-270
• /
• 2000

In this paper, we consider the simple redundant structures with the function of hardware based active/standby control. The system includes two switch modules. The switch module is connected to a data bus, but only the active switch module has control of the data bus. The standby unit takes over the function of the active unit when the active unit failure or mode command are asserted. And this paper illustrate the high-speed router system and the overall redundant system architecture. The proposed redundant architecture for 80G Router system is verified and implemented with experiment.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.191-193
• /
• 2005

Flash memories are one of best media to support portable computer's storages. However, we need to improve traditional data management scheme due to the relatively slow characteristics of flash operation as compared to RAM memory. In order to achieve this goal, we devise a new scheme called Flash Two Phase Locking (F2PL) scheme for efficient data processing. F2PL improves transaction performance by allowing multi version reads and efficiently handling slow flash write/erase operation in lock management process.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.373-373
• /
• 2000

In this paper, we propose a fuzzy modeling algorithm which divides the input space more efficiently than convention methods by taking into consideration correlations between components of sample data. The proposed fuzzy modeling algorithm consists of two steps: coarse tuning, which determines consequent parameters approximately using FCRM clustering method, and fine tuning, which adjusts the premise and consequent parameters more precisely by gradient descent algorithm. To evaluate the performance of the proposed fuzzy mode, we use the numerical data of nonlinear function.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.47.2-47.2
• /
• 2020

The Experiment to Detect the Global EoR Signature (EDGES) has probed the status of the early Universe through the global 21cm observation. The claimed (brightness temperature) of ~ 500 mK absorption dip at z~17 against the continuum background cannot be explained in the standard LambdaCDM framework. In the meantime, the Planck 2018 Legacy Data, especially the E-mode polarization power spectrum, puts rather strong constraints on the high-redshift reionization process. We show how these two observational contraints can be accomodated in a series of reionization scenarios, with a special focus on the strongly self-regulated reionization by first stars.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.6
• /
• pp.1207-1219
• /
• 2014

In this study, 1) we compare face channel and non-face channel of life insurance company and non-life insurance company with insurance employs' suitability opinion about channel type, channel property, channel evaluation items requiring when selling insurance products, 2) we construct two social networks for life insurance companies and non-life insurance companies and find/compare two networks' properties, and then want to suggest any direction about sale channel strategy. As the result of comparing social networks of life insurance company and non-life insurance company created by insurance selling channel fit evaluation, employs of life insurance companies have more common opinion than those of non-life insurance companies and so can have more same directional channel strategy. However, property insurance companies need to manage their own channel strategy based on their own circumstance.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.2
• /
• pp.193-203
• /
• 1996

Long period waves were measured at two stations outside and inside Chukpyon Harbor using two pressure-type wave gauges for one week that covers storm sea period. Based on the collected data the characteristics of long-period resonant oscillations were analysed: the resonant period corresponding to the peak spectral density are slightly different from one to the component wave period with the largest amplification ratio, and the latter period is suggested as that of the first resonant mode. From the analysed field data and numerical modeling, the first resonant mode of Chukpyon Harbor region appeared to be around 12 minutes with amplification ratio of 7, whose amplitude varies 10-20 cm inside of the harbour, and also the second mode appeared to be around 6 minutes. The waves of 2-3 minute periods were resonated apparently in the harbour, which is considered to be generated from group-bounded irregular waves and non-linear wave-wave interaction etc. The linearly decreasing reflection coefficients used in the numerical modeling appeared to be an alternative in calculating reflected waves in harbor.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.179-190
• /
• 1999

To automate the polishing process, a polishing robot with two axes which is attached to a machining center with three axes has been developed by our previous research. This automatic polishing robot is able to keep the polishing tool normal to the curved surface of die and is able to maintain a constant pneumatic pressure. Therefore, in the case of a curved surface die, the surface roughness to be polished by the system with five axes is improved superior than the surface by a three-axis machining center. However, because the polishing robot was big and heavy, a polishing workspace was limited and then it was difficult to attach the robot to machining center. In this study, the smaller and lighter polishing robot than the previous has been designed to improve defects due to the magnitude and weight of the robot. And the sliding mode control ins applied to polishing robot to improve the tracking performance. To obtain switching parameters of sliding mode control, the signal compression method is used. Code separation program to separate the date for a three-axis machining center and a two-axis polishing robot from a five-axis NC data is improved for users to check conveniently the separated trajectory and to handle many data by using the graphic user interface. To evaluate the polishing performance of the developed robot, the polishing experiment for shadow mask was carried out. The result shows the automatic polishing robot has a good trajectory tracking performance and obtains a good polished workpiece efficiently under recommended polishing conditions.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.9
• /
• pp.712-718
• /
• 1991

In this paper, we propose a graphic system for high speed generation of bitmap font data from the outline font data such as PostScript, etc. In desk-top publishing system. A VLSI chip called KAFOG was designed for the high-speed calculation of a cubic Bezier curve, which was implemented in 1.5\ulcorner CMOS gate array using 17,000 gates. A cubic Bezier curve is approximated by a set of line segments in KAFOG at the throughput of 250K curves per second with the clock frequency of 40 MHz. A prototype graphic system was developed using two MC6800 microprocessors and the KAFOG chip. Two microprocessors cooperate in a master and slave mode, and handshaking is used for communication between two processors. KAFOG chip, being controlled by the slave processor, operates as a coprocessor for the calculation of the outline font. The throughput of the prototype graphic system is 40 64$\times$64 outline fonts per sencond.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.4
• /
• pp.371-376
• /
• 2012

The experimental test was conducted for a heavy-duty DME bus in JE-05 exhaust gas test mode using a chassis dynamometer, exhaust gas analyzers, and a PM measurement system. The heavy-duty DME bus was not equipped with after-treatment systems such as DOC or DPF. The dynamic behavior, emission characteristics, and fuel economy of the bus were investigated with an 8.0-liter, 6-cylinder conventional diesel engine. The results showed that the dynamic behavior in DME mode was almost the same as in diesel mode. However, there was little difference among the two operation modes for $NO_x$ and CO emissions. THC emissions were lower for DME mode than for diesel mode. Also, the amount of PM emissions was remarkably lower than for the diesel mode because DME contains a greater amount of oxygen than diesel. The data showed that $CO_2$ emissions were almost similar in the two modes but fuel economy (calculated using heating value) was lower for DME mode than for diesel mode.