• 한국구조물진단유지관리공학회 논문집
• /
• 제6권3호
• /
• pp.97-102
• /
• 2002

Two dimensional Analysis has been applied to most of tunnel lining design in these days. Two dimensional analysis uses beam or curved beam element for finite element method. But because the behaviors of tunnel concrete lining structure is near to shell, it is required to model the tunnel lining as shell structure for safety design of tunnel lining structure. In this paper, two dimensional analysis by beam element and the three dimensional analysis by shell element of tunnel concrete lining are studied, in which 3 type of tunnel lining and lateral pressure factors are considered. As results of the study, three dimensional analyses of the behavior of tunnel concrete lining structure considering lateral pressure factor shows that the moment of three dimensional analysis is greater than those of two dimensional analysis. The results shows that three dimensional analysis is necessary for safety design of tunnel lining.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제10권4호
• /
• pp.251-263
• /
• 2010

Modelling for failures is important for reliability analysis since failures of products such as automobiles occur as both time and usage progress and the results from the proper analysis of the two-dimensional data can be used for establishing warranty assurance policy. Hence, in this paper general issues which concern modelling failures are discussed, and both one-dimensional approaches and two-dimensional approaches to two-dimensional data are investigated. Finally non-parametric approaches to two-dimensional data are presented as a means of exploratory data analyses.

• 대한기계학회논문집B
• /
• 제25권1호
• /
• pp.1-8
• /
• 2001

Performance of a rectangular fin is investigated by a three dimensional analytical method. Heat loss and the temperature obtained from the three dimensional analysis are compared with those calculated from a two dimensional analysis. Fin effectiveness, fin resistance and fin efficiency for the rectangular fin are presented as a function of non-dimensional fin length and fin width. The results are obtained in the following : (1) heat loss calculated from the two dimensional analysis is the same as that obtained from the three dimensional analysis with adiabatic boundary condition in z-direction, (2) heat loss obtained from the two dimensional analysis approaches the value for the three dimensional analysis as the non-dimensional fin width becomes large, (3) fin effectiveness increases as non-dimensional fin length increases and non-dimensional fin width decreases, and vice versa for fin efficiency.

• 산업기술연구
• /
• 제27권A호
• /
• pp.85-94
• /
• 2007

This study, regarding curved channel, was performed to compare and analyze hydraulic characteristics and the speed of water and water level for left bank and right bank through hydraulic model experiments and numerical analysis. Real channels that had characteristics of curved channel were selected as objectives. In order to easily operate one and two dimensional numerical analysis and comparison for total 2.4Km model channel, measuring point was set up as 200m. HEC-RAS model was applied as one dimensional numerical analysis program and SMS model was used as two dimensional numerical analysis program. In respect of speed of water, the average speed of water for right bank recorded 8.33m/s in a model experiment and 3.08m/s, 8.57m/s were average speed of water for right bank in one dimensional and two dimensional numerical analysis. The average speed of water of two dimensional numerical analysis was quite similar to that of model experiments. Also, as for water level, maximum observational errors between one and two dimensional numerical analysis for right and left bank of model experiments were 0.66m, 0.84m and 0.28m, 0.48m for each. It was found that two dimensional numerical analysis had a similar result to hydraulic model experiments. Accordingly, from the result of this study, two dimensional numerical analysis should be used rather than one dimensional numerical analysis, when numerical analysis for curved channel is conducted.

• 품질경영학회지
• /
• 제28권1호
• /
• pp.57-77
• /
• 2000

A two-dimensional warranty policy, two types of warranty criteria, such as the age and mileage of an automobile, are employed simultaneously to determine the eligibility of a warranty claim. We deal with the analysis of a variety of combined two-dimensional free replacement warranty(FRW) and pro-rata replacement warranty(PRW). In this paper we also propose the analysis of policies with item failures modelled using the one-dimensional and two-dimensional approach, respectively. We obtain expressions for the expected warranty costs and illustrate through numerical examples.

• 터널과지하공간
• /
• 제12권3호
• /
• pp.158-170
• /
• 2002

Shi가 개발한 불연속 변형 해석은 많은 발전이 있었지만 지금까지의 해석이 모두 평면변형률이나 평면응력을 가정한 이차원으로 이루어진 해석이다. 하지만 불연속면이 기본적으로 삼차원을 형성하므로 이차원으로 해석하는데는 한계가 있다. 삼차원의 불연속면이 안정성에 큰 영향을 미치는 사면, 지하 비축기지 등의 설계에서는 삼차원 해석에 대한 연구가 필요하다. 이에 이 연구에서는 기존 Shi가 개발한 이차원 불연속 변형 해석을 삼차원 불연속 변형 해석의 이론으로 확장하고 프로그램을 개발하여 실제 블록에 적용함으로써 개발된 이론과 프로그램의 타당성을 검증하였다. 개발한 프로그램을 이용하여 일정한 경사를 가진 블록의 미끄러짐과 쐐기의 미끄러짐을 해석하여 이론값과 정확히 일치하는 결과를 얻었다. 삼차원 이론확장과 검증을 바탕으로 향후 보다 많은 숫자의 블록에 적용하면서 해석을 할 것이다.

• 한국자동차공학회논문집
• /
• 제3권1호
• /
• pp.97-107
• /
• 1995

Global postbuckling analysis is accomplished for one-dimensional and two-dimensional delaminations. A new finite element model, which can be used to model the global postbuckling analysis of one-dimensional and two-dimensional delaminations, is presented. In order to calculate the strain energy release rate, geometrically nonlinear analysis is accomplished, and the incremental crack closure technique is introduced. To check the effectiveness of the finite element models and the incremental crack closure technique, the simplified closed-form sloution for a through-the-width delamination with plane strain condition is derived and compared with the finite element result. The finite element results show good agreement with the closed-foul1 solutions. The present method was extended to calculate the strain energy release rate for two-dimensional delamination. For a symmetric circular delamination, the strain energy release rate shows great variation along the delamination front. and the delamination growth appears to occur perpendicular to the loading direction.

• 한국지반공학회논문집
• /
• 제36권7호
• /
• pp.5-14
• /
• 2020

간사이 공항은 1994년 9월에 개항하였다. 제 1기섬 완공 후 26년이 지났지만 여전히 장기침하가 진행되고 있다. 이 침하는 Pleistocene층에서 발생하고 있다. 계속적으로 변하는 수평방향으로의 지층두께 및 세립분의 함유량이 달라 Pleistocene 모래층의 투수성을 결정하는 것이 쉽지 않기 때문이다. 또한 인접한 제 2기섬의 건설에 따른 지반의 상호거동을 예측에 대한 어려움도 존재한다. 이 문제를 해결하기 위해서, 인접한 두 매립 섬의 건설에 따른 교차하는 Pleistocene 지반의 상호거동을 포함한 장기변형을 평가하기 위해 탄점소성을 고려한 2차원 유한요소해석이 수행되었다. 일반적으로 2차원해석은 한 개의 단면이 전체 단면을 대표할 수 있을 때 사용이 가능하다. 하지만 간사이공항은 매립에 의한 인공섬으로서 2차원 해석으로는 섬의 코너(corner) 부분의 응력 변형문제에 적용할 수 없으며, 물리탐사를 통한 실제 하부지반의 구조도 불균질하며 그 두께 또한 일정하지 않아 2차원해석만으로는 한계가 있다. 즉, 3차원 해석이 강력히 요구된다. 이러한 요구에 의해 본 저자는 탄점소성 해석이 가능한 기존의 2차원 프로그램을 3차원으로 확장하였으며, 1차원 압밀해석해을 통해서 개발한 3차원 프로그램의 검증(verification)을 완료하였다. 본 논문은 검증을 마친, 개발한 3차원 프로그램의 유효성을 입증하기 위해서, 2차원 프로그램을 이용한 기존의 연구와 동일한 해석조건으로 해석을 수행하여, 해석결과를 2차원 결과와 실제 계측값과 비교함으로서 개발한 3차원 수치해석프로그램의 유효성을 입증(demonstration)하였다.

• 지질공학
• /
• 제6권3호
• /
• pp.111-118
• /
• 1996

터널이 굴진될 때 주변지반은 3차원적으로 거동하게 되나 설계단계에서의 해석은 일반적으로 2차원적으로 수향하고 있다. 2차원적인 터널해석은 응력분배법 또는 강송 변화법에 의하여 3차원적인 터널굴진에 따른 다양한 조건하에서의 정규화된 지반 변위곡선을 구하고 이 곡선과 유사한 곡선이 유도되도록 시행착오법에 의하여 2차원 해석을 실시하므로 3차원 해석과 근사한 변위곡선을 가지도록 막장거리별 응력분배비율을 결정하였다. 따라서, 시간과 노력이 많이 소요되는 3차원 해석없이도 적절한 응력분배비율을 적용하는 경우 2차원 해석으로 터널굴진시의 3차원적인 지반거동을 평가할 수 있게 되었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.270-277
• /
• 2004

In this paper, path-independent values of the J-integral in the fininte element context for arbitrary two-dimensional and three-dimensional crack configurations in welds are presented. For the fracture mechanics analysis of cracks in welds, residual stress analysis and fracture analysis must be performed simultaneously. In the analysis of cracked bodies containing residual stress, the usual domain integral formulation results in path-dependent values of the J-integral. This paper discusses modifications of the conventional J-integral that yield path independence in the presence of residual stress generated by welding. The residual stress problem is treated as an initial strain problem and the J-integral modified for this class of problem is used. And a finite element program which can evaluate the J-integral for cracks in two-dimensional and three-dimensional residual stress bearing bodies is developed using the modified J-integral definition. The situation when residual stress only is present is examed as is the case when mechanical stresses are applied in conjunction with a residual stress field.