• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.83-88
• /
• 2011

This study presented the structure and characteristics of vinyl cords used for wiring electric equipment and appliances and analyzed the photographs of damaged flat-type vinyl cords (VFF, $1.25mm^2$) and the metallic cross-sectional structure of melted conductors. Normal VFFs were made by twisting several strands together and the surface of the conductor was red brown. In addition, from the analysis of the metallic structure of the conductor, it was found that its grains had been elongated. The surface of a VFF damaged by normal flame showed no sheen with carbonized insulation material fused on the conductor surface. In addition, from the analysis of the cross-sectional structure of the melted area, it was found that voids of a certain shape were formed on it but that the cord's own elongation structure could not be checked. The cross-sectional analysis of the melted conductor damaged by the external flame applied to a VFF to which electric current was being applied showed no elongation structure for each cord, and revealed that irregular voids and a columnar structure had grown. The surface of the VFF damaged by overcurrent was uniformly carbonized and the cross-sectional structure analysis of the melted conductor revealed that the dendritic structure had grown. The analysis of the characteristics of the VFF melted by short-circuit showed that even though some part of the surface was contaminated, it showed little sheen and that the area rebounded by melting was round in shape. In addition, the cross-sectional structure analysis using a metallurgical microscope showed the boundary surface and columnar structure and revealed an amorphous structure like normal copper at areas other than the melted conductor.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.81-89
• /
• 2008

Shear test procedure for concrete-dowel interaction was proposed along with determination of dowel support reaction factor or shear spring stiffness constant using the spreadsheet example. For this task, three AASHTO-type standard specimens were prepared to simulate behavior of the jointed concrete pavement. A side support system was adopted to minimize twisting of the test specimen which had been observed in a preliminary test. A typical elastic behavior of the dowel-concrete interaction was observed from several test loops of loading, unloading and reloading procedures. However load versus slab displacement represents to be nonlinear. Test results show that the dowel support reaction factor ranges from 550-880 GN/m3, which is 1.4-2.2 times greater than 407GN/m3 proposed by Yoder and Witczak. This is because less torsional distraction was occurred with the help of a side support system adopted in this experiment. The dowel support reaction factor or shear spring stiffness constant obtained from the procedures proposed in this paper may be used as a reference data for the structural analysis of jointed concrete pavement.

• Korean Journal of Human Ecology
• /
• v.19 no.6
• /
• pp.1063-1070
• /
• 2010

This study examined 12 types of towels with differing fabric material, function, quality, printing, pile length, twist, etc. from a towel company which manufactures and distributes products domestically. After 3 months of use by consumers, a consumer satisfaction survey was administered and results analyzed. Four types of towels were assigned to each group and the towels were used every day for 3 months. Participant feelings after using the towel for the first time and after using it for three months were investigated. The questionnaire consisted of 26 questions on a 5-point Licket-type scale. The first 13 questions measured perceptions of absorption, touch, fine fiber loss, contamination, deformation, drying speed, and design. Other questions compared differences between the two towel types in terms of their material, function, quality, printing, pile length, and degree of twisting. Results showed that, with regards to weight, consumers preferred towels between 130~150g and a thickness of around 1.7~1.8mm. The bamboo towel was considered superior to the cotton towel in terms of sense of touch and did not happen linter after washing. The antibacterial towel was considered better than the cotton towel in terms of absorption but in terms of contamination, participants felt the antibacterial towel became dirty more easily than the cotton towel. We thought that it might be influence of the color of towel. Low-quality towels became stiffer and misshapen more easily than higher-quality towels. But the study showed that the consumers did not perceive significant differences in the towels' quality. Printed towels became thinner and their color changed more with washing. The consumers preferred the design of jacquard towels to printed towels. Towels with short piles was happened more linter than the towel with long pile after washing. Non-twisted towel were better than the highly-twisted towel in terms of sense of touch and absorption but the non-twisted towel happened more linter after washing and became dirty more easily.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.1
• /
• pp.45-53
• /
• 2008

Different method of textile fabrication had existed since the ancient times, but the most dominant form was the 'weaving' method which embodies the cross fabrication of vertical and horizontal threads using special weaving machines (looms). In addition, fabrication methods like knitting, felt, and lace were commonly practiced while intertwinement methods like twisting, braiding, and knotting techniques were frequently used for weaving strings and braid type textiles. In the past, people did not pay attention to strings and braids because they were classified as non-textiles, but, in this paper, we have expanded the scope of definition of textile to include strings and braids, and seek to conduct in-depth research on various different intertwinement of textiles. The adaptation of intertwinement method in arts and crafts enables limitless creative works reflecting the ever-changing taste and style of the creator. This creativity is further broadened by the fact that intertwinement methods encompass no set patterns and the subject and shape of its creation is as broad as its artistic pursuits. We can infer the knowledge of our ancestors, their aesthetic taste, and the pattern of life from these creations. In addition, these creations can provide comfort and improve the quality of life of modem people who are deeply deprived of sentimental and emotional solitude in the technological civilization of the 21stcentury. The main purpose of this paper is to examine traditional Korean arts and crafts made using the intertwinement methodology through the context of strings, braids, straw crafts and knotting method. Then it will conduct through research on the different materials, forms, characteristics, usage and other key notions based on the currently preserved records and relics to contribute to the research on traditional textiles and provide the foundations to the development of the Korean culture and cultural products, reflecting the true sole and aesthetics of traditional Korean textile crafts.

• Research in Community and Public Health Nursing
• /
• v.9 no.1
• /
• pp.213-222
• /
• 1998

The prevalence rate of low back pain in nurses is higher than that of other jobs, because there are many more risk factors(for example, standing postures, lifting and carrying heavy loads, transfering patients, changing a patient's position etc.). This investigation is to provide basic data for prevention of low back pain by analyzing the prevalence rate and related factors of low back pain in nurses(esp. operating room staff) in general hospitals. A self-reported questionaire survey was carried out on three hundred and five nurses of three general hospitals in Seoul from June, 1996 to August, 1996. Subjects of the survey were divided into a low back pain group(LBP) and a cotrol group to investigate the association between low back pain and the general characteristics and work related factors of each group. The results were as follows: 1. In the subjects of the survey, the prevalence rate of low back pain was 60.0% for the last year. 2. 73.6% of operating room(OR) staff complained of low back pain. 3. Standing for a long time and working in twisting postures were associated with low back pain, and so were the shift, the type of work, and the frequency of transfering patients. 4. The weight loads which nurses frequently carried were, under 5kg, 5-10kg, 15-20kg, 15-20kg, over 20kg, and all, except for 10-15kg, were associated with LBP. 5. 76.9% of the LBP experienced low back pain within 3 years after starting nursing jobs. 6. Concerning the degrees of low back pain: 75.8% was limited to waist; 18.8% reached the knees; 4.2% reached ankles. In conclusion, the prevalence rate of low back pain in general hospital nurses was associated with the works in operating room and other work related factors, therefore it is necessary to develop on educational program for the prevention of low back pain as well as and to improve working environments.

• Journal of the Korean Society of Safety
• /
• v.32 no.2
• /
• pp.117-123
• /
• 2017

This study was intended to find methods of fire extinguishing system designs that can improve the equipment's usability. In this study, the fire suppression experiment through fire extinguishers and the data drawn through the experiment were analyzed, and then the guideline for the improvement of designs was presented. The procedure is as follows. A fire suppression experiment with the use of fire extinguishers was done by 43 average adults. The whole process of the fire suppression was videotaped, and then captured major scenes were analyzed with the use of RULA, a human engineering measurement tool. The analyzed data were divided into 4 steps, and then the guideline for design improvement was presented. The summary of the study is as follows. Step 1, Fire extinguisher distance step. To reduce overload occurring at the process of holding fire extinguishers suddenly, wheels are attached to the body of extinguishers, or pedestals are installed. Step 2, Fire extinguisher transportation step. The length of hose is extended, or fire fighting water is sprayed far, so that overload of legs occurring at the process of travel can be reduced. In addition, the weight of fire extinguisher shouldn't be over 2 kg. Step 3, Safety pin removal stage. Safety pins should be applied with button type, so that excessive posture of lower limbs and excessive twisting of wrists won't happen during safety pin removal process. Besides, safety pins should be designed for easy identification and operation. Step 4, Fire extinguishing agent spraying step. To reduce overload occurring at sudden spraying of fire fighting water, pressure should be increased gradually until high pressure. With the above study results applied to existing fire extinguisher design, it may contribute to reducing any fire damage.

• Journal of Korean Foot and Ankle Society
• /
• v.5 no.1
• /
• pp.62-68
• /
• 2001

Purpose: to investigate the etiology and the results of surgical treatment of the symptomatic accessory navicular in adults. Materials and Methods: Between 1996 and 2000, 17 cases in 16 adult patients who were older than 20 years were diagnosed as painful accessory na vicular. 11 patients could recall a twisting injury of the ankle, and 8 of them were inversion sprain. 4 patients had tibialis posterior tendon lesions. 13 feet of 12 patients were treated by resection of accessory navicular, the synchondrosis, the medial portion of the navicular and reattachment of tibialis posterior tendon without transposition. 9 feet in 8 patients were followed for more than one year after surgery. In 4 patients with tibialis posterior tendon lesions, additional procedures were performed according to the state of the lesion. Results: All were type II accessory navicular bone which had synchondroses. There was gross motion of the synchondrosis in 'the operating field in all feet. Of the 9 feet which were followed for more than one year after surgery, results were excellent in five and good in four. Conclusion: The painful accessory navicular in adult might be closely associated with inversion ankle sprain, and also with the tibialis posterior tendon lesions. Satisfactory result could be obtained without transposition of the tibialis posterior tendon to the undersurface of the navicular and immediate postoperative weight bearing does not have harmful effect on the result.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.287-292
• /
• 2021

We utilized the isogeometric analysis (IGA) method that uses NURBS basis functions in CAD systems, to account for the geometric exactness of a geometrically exact beam deformation, on a new type of metamaterial, twist-translation coupled structure showing a large twist angle. A two-dimensional unit cell structure was embedded in a cylindrical wall, using free-form deformation and an appropriate interpolation scheme. A parametric study on the effects of the dimensions of the cylinder and the number of cells, on the twisting angle was performed. Furthermore, the mechanism of the twist-translation coupled metamaterial was explored through numerical examples.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• Polymer(Korea)
• /
• v.30 no.4
• /
• pp.338-349
• /
• 2006

Fully or nearly fully(8-cholesteryloxycarbonyl)heptanoated polysaccharide derivatives were synthesized by reacting cellulose, amylose, chitosan, chitin, alginic acid, pullulan or amylopectin with (8-cholesteryloxycarbonyl)heptanoyl chloride (CH8C), and their thermotropic liquid crystalline behaviors were investigated. Like in the case of CH8C, all the polysaccharide derivatives formed monotropic cholesteric phases with left-handed helicoidal structures whose optical pitches $({\lambda_m}'s)$ decrease with increasing temperature. Amylopectin derivative also formed a monotropic cholesteric phase with lefthanded helicoidal structures but, in contrast with the other derivatives, did not display reflection colors over the full cholesteric range, suggesting that the helicoidal twisting power of the cholesteryl group highly depends on the branched structure in amylopectin. The thermal stability and degree of order in the mesophase, the magnitude of ${\lambda}_m$ at the same temperature, and the temperature dependence of the ${\lambda}_m$ observed for polysaccharide derivatives were entirely different from those reported for the polymers in which the cholesteryl groups are attached to flexible or semiflexible backbones through flexible spacers. The results were discussed in terms of the difference in the chemical structures of the main and side chains and flexibility of the main chain.