• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.113-118
• /
• 2012

Mulching vinyl is used on field crops to reduce herbicides and this causes multiple effects. The mulching vinyl must be collected for the next crop season, but was left alone due to a shortage of labor. The used mulching vinyl that was left alone acted as one of the main sources of environmental pollution on farms. In order to solve these problems, a self-propelling vinyl remover was developed. The self-propelling vinyl remover consists of a travelling part and rotating of remover wheel. Each output device has a 1.5ps engine and a 2.5ps engine. The vinyl was twisted 17~47cm/times length. The bobbin's diameter was 160mm and it's stable travelling speed was 0.5m/s. The revolution of the remover wheel bobbin was 60rpm to maintain the wheel's linear velocity. As seen at performance test at the field which had 950mm ridge intervals and 10a area, the average working speed was 0.56m/s and the turning time was 15seconds. Therefore, the working performance was 40.1min/10a.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.1-7
• /
• 2014

An impeller is difficult to machine due to the complex, overlapping and twisted shapes that form the blades of an impeller. Therefore, most CAM software companies have developed a CAM module for manufacturing an impeller in addition to their CAM software. However, it is not easy for inexperienced users to machine impellers. The purpose of this paper is to outline the development of an automatic CAM module for the manufacturing of an impeller (E-ICAM) which is based on visual basic language and which uses a CATIA graphical environment in order to simplify the machining of impellers. The automatic CAM module generates a tool path and proposes the recommended cutting condition according to the stock and tool material. In addition, it includes a post-processor for five-axis control machining. Therefore, a user can easily machine impellers using this automation module. There are two types of impellers: the closed and open types. The closed-type impeller consists of the body and cover parts. To combine these two parts, it is necessary to create tap holes on the shroud of the body. Therefore, in the study, a drilling CAM program for a closed-type impeller is developed and manufactured by creating NC data from the developed drilling program. After manufacturing the test specimen, its compatibility was verified.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.585-588
• /
• 2003

We have studied how rubbing direction affects generation of disclination line in transmissive microdisplay for $90^{\circ}$ twisted nematic (TN) mode with pixel size of $22.2{\mu}m$. The rubbing direction of bottom substrate is changed from $0^{\circ}$ to $-135^{\circ}$ with a decrease step of $45^{\circ}$, and the results show that the generation regions of the disclination line are of a smallest size in $-135^{\circ}$ direction. The results were the same although the pixel size decreased. Consequently, the use of proper rubbing direction of liquid crystal can help overcome the problems of low aperture ratio and low contrast ratio in transmissive-type microdisplays. In addition, the pretilt angle of initial liquid crystal is found to make an important contribution to generation of the disclination line.

• 전자공학회논문지D
• /
• 제34D권11호
• /
• pp.90-100
• /
• 1997

In this paper, we propose a new optical thresold generator as a key-stream genrator for stream cipher systems. The random key-bit stream is generated by a digital generator that is composed of LFSRs and nonlinear ligics. Digital implementatin of a key-stream generator requires large memory to implement programmable tapping points. This memory problem may be overcome easily by using the proposed optical system which has the proberty of 2D parallel processing.To implement hte threshold generator optically, we use conventional twisted nematic type SLMs (LCDs). This proposed system is based on the shadow casting technique for the AND operation between taps and sregister stages. It is also based on the proposed PMRS method for modulo 2 addition. The proposed PMRS method uses the property of light's polarization on LCD and can be implemented optically using one LCD and some mirrors. One of the major advantages of the proosed system is that there is no limitation of the number of the progarmmable tapping points. Therefore, the proposed system can be applied for the 2D encryption system which processes large amounts of data such as 2D images. We verify the proposed system with some simulation.

• 수산해양교육연구
• /
• 제29권1호
• /
• pp.234-241
• /
• 2017

Morphological and molecular information about two microfilamentous endophytic algae of the Grateloupia lanceolata or Bryopsis sp. from Korea is given. Of two endophytes, Phaeophila dendroides is endophytic in Grateloupia lanceolata. It is green in color and composed of uniseriate branched filaments with long setae. Each cell had several pyrenoids. Undulate or twisted Phaeophila-type hair developed from vegetative cells. Dilabifilum arthropyreniae is endophytic in Bryopsis sp. The frond of this species consists of frequently irregular, branching uniseriate filaments. Each cell had a single pyrenoid without hairs. Sporangia were not observed. The ends of the filaments were curved. In the phylogenetic tree, based on tufA and ITS sequences, these two species are nested in the same clade as Phaeophila dendroides and Dilabifilum arthropyreniae, respectively. In this study, these two species are newly recorded in the Korean marine algal flora, based on the morphological and molecular data.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.185-188
• /
• 2005

We synthesized the two types of photoalignment material of high thermal resistance with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the two types of photopolymer surface can be obtained. The Voltage-transmittance (V-T) curve in the photoaligned TN cell with UV exposure was different from two type. The response time of photoaligned TN cell was measured about 21 ms in two alkyl chain and about 15ms in four alkyl chain.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.810-812
• /
• 2008

Previously study on structural design of the main wing of the twenty-seat class WIG(Wing in Ground Effect) craft. In the final design, three spars construction was selected for safety in the critical flight load, and the Carbon-Epoxy material was selected for lightness and structural stability. In this study, the forced vibration analysis was performed on the composite main wing structure of the twenty-seat class WIG craft with two-stroke pusher type reciprocating engine. The vibration analysis based on the finite element method was performed using a commercial FEM code, MSC/NASTRAN. Excitations for the frequency response analysis were assumed as the H-mode(horizontal mode), the V-mode(vertical mode) and the X-mode(twisted mode) which are typical main vibration modes of engine. And excitations for the transient response analysis were assumed as the L-mode(longitudinal mode) with the oscillating propeller thrust which occurs in operation. According to the result of forced vibration analysis, structural design was modified to reduce the vibrations.

• 한국의류산업학회지
• /
• 제20권6호
• /
• pp.704-712
• /
• 2018

This study analyzed working postures using the Ovako Working Posture Analysis System (OWAS) to improve work clothes for construction workers. A video taken at a construction work site was stopped at regular intervals and the postures of relevant body parts proposed by OWAS was recorded. Additionally, based on analysis of the working postures code, the level of work action for each postures was classified from stage I to IV. General workers frequently straightened or bent forward at the waist, and used their legs to stand, bend, or walk. Wood workers moved extensively from the waist, keeping their legs relatively straight and their arms held below their shoulders, repeatedly tapping with a hammer weighing less than 10.0kg. Rebar bending workers mainly bent forward at the waist, with both legs bent or standing with one leg bent. Rebar transport and fixing workers walked with the waist straight, and occasionally one or both hands held above the shoulders. Their work also involved holding a hook, which weigh less than 10.0kg, in their hands, and the difficult task of lifting and placing long rebars, which weigh from 10.0 to 20.0kg or more. Concrete pouring workers bent or twisted their back to the side. Therefore, this study suggests that design goals should be different when developing workwear for each type of worker.

• 대한치과교정학회지
• /
• 제54권4호
• /
• pp.257-263
• /
• 2024

Objective: Lingual fixed retainers, made from 0.0175-inch 3-strand twisted stainless steel wire (TW) and 0.016 × 0.022-inch straight rectangular wire (RW), are generally used in clinical practice. This study aimed to calculate their accuracy by comparing the discrepancy between computer-aided customized retainers made from these two types of wires. Methods: Eleven orthodontic patients were selected, resulting in 22 maxillary and mandibular three-dimensional printing dental models. Two types of lingual fixed retainers were bonded from canine to canine. To determine the accuracy, five points were chosen for each model, resulting in 110 selected points. The absolute values of the distances on the x-, y-, and z-axes were measured to compare the accuracy of the two types of computer-aided retainers. Results: The accuracy of the two types of retainers did not differ significantly in the x- and z-axes, but only in the y-axis (P < 0.01), where RW-fixed retainers exhibited a slightly but significantly increased distance compared to the TW. Conclusions: Both types of retainers showed high accuracy; however, RW had a slight but statistically significant difference along the y-axis compared with TW. This type of computer-aided design/computer-aided manufacturing bending machine is limited to two dimensions, and the dental arch is curved. Therefore, RW may require slight manual adjustment by the practitioner after manufacturing.

• 한국잠사곤충학회지
• /
• 제20권1호
• /
• pp.15-23
• /
• 1978

본 연구는 견직물의 촉감을 손상시키지 않는 범위에서 바람직한 방추성을 보유하는 보다 좋은 요소수지가 공법을 개발하기 위하여 수년간에 걸친 보고이다. 특히 본보고는 요소와 결합하는 폴마린양을 극소화한데 특징이 있고 일반요소수지보다도 더욱 우수성을 보이는 반금속성요소수지(Homo Metalic Urea Resin)을 개발하였다는 사실도 첨가하며 본연구에서 얻어진 결과는 다음과 같다. 1. 본보고에 수록된 요소수지조성은 폴마린함량을 극소화하였고 조성된 수지에서 거의 폴마린냄새를 인정할 수 없을 정도였으며 이전에 보고된 어느 것보다 가장 소량의 폴마린으로 요소수지를 만들었다. 2. 필자가 최초로 만든 화합물 즉 uric zincchloride와 폴마린을 원료로 하여 새로운 반금속성요소수지(Homo Metalic Urea Resin)를 개발하였다. 이 방법은 합성수지처리와 중앙처리를 동시에 할 수 있는 특징이 있다. 3. 위의 두가지 수지처리에서 방추도, 강연도 및 발키네스 등이 증가되었는데 신규개발한 수지가 더욱 좋은 결과를 보였다. 4. 견방사나 저연사견직물이 생사나 고연사손직물의 경우보다 좋은 방추개선을 보였다. 5. 두가지 수지처리법이 모두 실용상의 경제성이 좋았다. 6. 강력과 신도가 수지처리후 다소 저하되었는데 이것은 수지처리로 가교작용과 증량작용이 일어났기 때문이었다. 7. 특수한 요소수지처리방법으로 양모와 유사한 견사제조법도 개발했다. 이 방법은 요소용액에 침지한 생사를 폴마린가스로 충만된 밀실에 방치해 둠으로서 생사표면에 스케일을 발생하게 한 것이다.