• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.213-219
• /
• 2018

Mechanical components are to be produced with accurate dimensions in order to function properly in assemblies of a machine. Once designs of mechanical components are created, designers examine the designs by adopting many known experimental methods. A primary test method includes stress and strain evaluation of structural parts. In addition, fatigue test and vibration analysis are an important test method for mechanical components. Real experiments at a laboratory are established when products are manufactured. Since design changes should be done before producing the designs in factories, rapid modifications for new designs are required in production industries. FEM simulation is a proper choice for a design evaluation with speed at a detail stage in design process. This research focuses modeling and mechanical simulation of a mechanical component in order to ensure structural safety. In this paper, a universal joint, being used in driving axels of vehicles, is studied as a target component. A design model is created and tested in some ways by using commercial software of FEM. The designed component is being twisted to transmit heavy power and thus, torsional stress should be under strengths of the component's material. The next is fatigue analysis to convince fatigue cycles to be within the endurance limit of the material. Another test is a vibration analysis for rotational components. This research draws final conclusions from these test analyses and recommends whether the designed model is under safety condition in terms of mechanical structure.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.274-280
• /
• 2020

This study compared the mechanical properties of bamboo fiber composites and kenaf fiber composites through physical treatment (ultrasonic treatment). Kenaf, a composite of PP reinforced with bamboo fiber, was made using injection molding technology. PP was used as a binder and the ultrasonic treatment time of bamboo and kenaf was increased by 30 minutes to compare and study various mechanical properties of bamboo and kenaf composites through physical treatment. Interfacial properties such as internal cracks and internal structure of the wave cross section were confirmed using a scanning electron microscope (SEM). As a result of the ultrasonic treatment, most of the characteristics were fragile as the ultrasonic treatment time was increased, and it was confirmed that the natural characteristics of the twisted fibers had a great influence on the characteristics of the composite material.

• Animal Systematics, Evolution and Diversity
• /
• 제40권3호
• /
• pp.211-220
• /
• 2024

During the surveys of ciliates from hypoxic habitats, three marine anaerobic species were found: Metopus spiculatus, M. vestitus, and Muranothrix felix. These species have not been previously recorded in South Korea and belong to the taxonomic classes Armophorea and Muranotrichea. The morphology of these species was examined by both microscopic observations of live specimens, and stained cells using protargol impregnations. Metopus spiculatus has the following characteristics: body size 80-110×25-35 ㎛ in vivo, beak-like structure at the end of preoral dome, ectosymbiotic bacteria covering cell surface, intracytoplasmic needle-shaped structures and the conspicuous tail end. Metopus vestitus has the following distinguishing characteristics: body size 95-130×25-45 ㎛ in vivo, a cone-shaped body, a covering of ectosymbiotic bacteria on its cell surface, intracytoplasmic needleshaped structures, somatic kineties arranged in 26-28 longitudinal rows, and a posterior part tapered into a tail. Muranothrix felix has the following characteristics: body size 100-130×20-30 ㎛ in vivo, elongated body with twisted neck region, bristle-like cilia protruding perpendicular to the cell margin, ectosymbiotic bacteria covering the cell surface, about 10 macronuclear nodules, and a long, stiffened caudal cilium.

• Journal of Acupuncture Research
• /
• 제21권6호
• /
• pp.177-186
• /
• 2004

Introduction : Recent studies Suggested that there is a strong correlation between acupuncture stimulation and its related cortical activation. Anther study showed that either positive or negative BOLD effects could be observed depending on anatomical structure in acupuncture stimulation. In ttis study, we investigated a new acupoint $KI_6$ (照海), which was known as motor-related acupoint and obtained an evidence that the stimulation of $KI_6$ resulted in either negative or positive BOLD response to stimulation. Methods & Results : 1. Subjects and paradigms : Two separate stimulation paradigms were performed on five healthy (aged 22-23 yrs) in this study. First, the paradigm of acupuncture stimulation was that the acupuncture needle was inserted in acupoints $KI_6$, which is located in lateral side of the foot and then continuously twisted(補瀉를 除外한 捻轉法) for 70 seconds for 10 cycles of activation. During rest period (70 seconds), the needle was completed removed from acupoint. Total 60 cycles were performed and 10 images were obtained per cycle. Second, nonacupoint was randomly selected and the same paradigm was performed as acupoint stimulation. The stimulation protocol comprised 10 cycles of alternating. activation and rest (10 images per cycle). Total 60 cycles were performed and each cycle take about 1.5 sec for motor task. Subjects take an at least 15 minutes break before starting anther paradigm. 2. fMRI mapping : Multi-slice functional images were obtained on a 1.5T Magnetom Vision MRI scanner (Simens Medical, Erlangen, Germany) equipped with high performance whole-body gradients. The BOLD T2 * - weighted images were acquired with acho planar imaging sequence (TR = 1.2 sec, TE = 60 msec, and flip angle = $90_{\circ}$). The other sequence parameter are : FOV = 210 mm, matrix=$64{\times}128$ or $64{\times}64$, slice number=10 and slice thickness = 5 or 8 mm. the anatomic images were obtained with Spin-echo T1-weighted images. The resulting images were then anaiyzed with STIMULATE (CMRR, U. of Minnesota) to generate functional maps using a student T-test (p < 0.005) and cluster analysis. Both positive and negative response were evaluated. Conclusions : We have observed the activation of the motor cortex by stimulating motor-related acupoint ($KI_6$). Among five subjects, negative BOLD response was shown in four and positive response in one. All subjects showed positive response to conventional finger flexion-extension task. To understand the detailed mechanisms of correlation between acupuncture stimulation and BOLD fMRI changes and two typs of response, further study strongly required.

• 한국공간구조학회논문집
• /
• 제11권4호
• /
• pp.79-88
• /
• 2011

근래에 들어와서 3T (Twisted, Tapered, Tilted)로 대별되는 비정형 초고층 건축물이 다수 계획되고 있다. 이러한 비정형 초고층 건물을 위해서 구조적인 효율성 및 조형성 때문에 다이어그리드 구조시스템이 현재까지 가장 널리 사용되고 있는 구조시스템 중의 하나이다. 건축적인 조형미 등의 이유로 경사진 비정형 초고층 건물에 대한 계획안이 다수 발표되고 있으며 다수의 구조물들이 다이어그리드 구조시스템을 활용하고 있다. 경사진 비정형 초고층 건물은 횡하중뿐만 아니라 자중에 의해서도 횡방향 변위가 발생한다. 따라서 정형적인 초고층 건물보다 횡방향 응답을 저감시카는 젓이 더 중요한 문제로 대두된다. 본 연구에서는 경사진 다이어그리드 비정형 초고층 건물의 지진응답을 저감시키기 위하여 스마트 TMD를 적용하였고 그 제어성능을 평가하였다. 스마트 TMD를 구성하기 위하여 MR 감쇠기를 사용하였으며 스마트 TMD는 그라운드훅 제어알고리즘을 사용하여 제어하였다. 100 층의 예제구조물에 대하여 제어를 하지 않은 경우와, 일반적인 TMD를 사용한 경우, 그리고 스마트 TMD를 사용하여 제어한 경우를 비교 검토하였다. 수지해석결과 스마트 TMD가 변위 응답 제어에는 우수한 성능을 나타냈지만 가속도응답제어에는 효과적이지 못했다.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.66-69
• /
• 2002

Zinc chlorin 1 possessing tertiary 3$^1$_hydroxy and 13$^1$-oxo groups was synthesized as a model for the antenna chlorophylls of photosynthetic green bacteria. Self-aggregation of 1 in nonpolar organic solvents was examined and compared to 2 and 3 possessing a secondary and primary 3$^1$_hydroxy group, respectively. Zinc chlorin 1 self-aggregated in I％(v/v) CH$_2$Cl$_2$-hexane to form oligomers and showed a red-shifted Qy maximum at 704 nm compared to the monomer (648 nm in CH$_2$CI2$_2$). This red-shift is larger than that of 3$^1$S-2 (648 to 697 nm) and comparable to that of3$^1$R-2 (648 to 705 nm), but smaller than that of 1 (648 to 740 nm), indicating that while a single 3$^1$-methyl group (primary to secondary OH) suppressed tight and/or extended aggregation, the additional 3$^1$-methyl group (secondary to tertiary OH) did not further suppress aggregation. The relative stability of the aggregates was in the order 3> 3$^1$R-2∼ 1 > 3$^1$S-2 as determined by visible spectral analyses. Molecular modeling calculations on oligomers of zinc chlorins 1, 3$^1$ R-2 and 3 gave similar well-ordered energy-minimized structures, while 3 stacked more tightly than 3$^1$ R- 2 and 1. In contrast, 3$^1$S-2 gave a relatively disordered (twisted) structure. The calculated oligomeric structures could explain the visible spectral data of 1-3 in nonpolar organic solvents. Moreover, self- aggregation of synthetic zinc 13$^1$_oxo-hlorins 4-6 possessing a 2-hydroxyethyl, 3-hydroxypropyl and 3- hydroxy-I-propenyl group at the 3-position in nonpolar organic solvents was discussed.

• 한국결정학회지
• /
• 제2권2호
• /
• pp.7-12
• /
• 1991

C13H18N2O3(Mr=250.29)는 단사정계의 P211a의 공간군을 갖고 있으며 a=8.765(4), b=17.679 (3), c=9.238(4)A, p=105.6(3)A, z=4, V= 1378.53A3, A(Mo Ka)=0.71069A, 1:0. 81cm-1, F(000)=536, T=298 이며 1.0 σ(I)보다 큰 강도를 가진 1783개의 회절반점에 대하여 최종 R값은 0.080이다. 직접법에 의하여 구조를 풀었으며 C-H 결합길이와 메칠기는 길이를 고정시켜 이 상적인 기하학적 구조에 맞추어 계단식 대각최소자 승법에 의하여 정밀화하였다 두 에토오키시기중의 하나는 다른 기에 비해 100°나 더 기울어져있다. 결정격자내에 한개의 N-H‥‥0(2.798A) 수소결합이 있어 두 분자를 연결하면서 b-축에 따라 쌓여져 있다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.7-12
• /
• 2007

본 연구에서는 선행연구에 의해 설계되어진 20인승급 소형 위그선의 주날개 구조를 엔진 및 프로펠러에 의해 유발되는 진동을 가진력으로 하여 강제진동 해석을 수행하였다. 대상 위그선은 왕복엔 진을 날개에 장착하여 프로펠러에 의한 추력으로 비행하며， 미는 형식(Pusher Type)의 엔진 배열을 취하고 있다. 유한요소해석을 위해서 구조해석 상용프로그랩인 MSC/NASTRAN을 사용하였으며， 엔진의 주요 진동 특성인 X-mode 와 Y-mode 그리고 Z-mode를 특정 가진 주파수로 하여 주파수 응답 해석을 수행하였고, 엔진의 추력방향 진동 모드인 X-mode를 프로펠러의 회전에 의해 진동을 수반하는 가진 추력으로 가정하여 과도응답 해석을 수행한 후 날개의 진동 특성을 살펴보았다.

• Composites Research
• /
• 제30권6호
• /
• pp.331-337
• /
• 2017

복합재 격자 구조물은 무게가 가볍고 비강성, 비강도가 높다는 장점이 있으며 주로 압축 하중이 작용하는 발사체구조에 적용된다. 그러나 필라멘트 와인딩 기법으로 제작되므로 섬유가 겹쳐지는 부분에서 기공과 결함이 발생하게 된다. 설계 하중 도출을 위한 해석 모델 검증을 위해 구조물의 강성, 강도 확인이 필요하지만 Full scale 시험의 경우 시간, 공간상의 제약이 따르며 구조물의 형상이 복잡하므로 시험에 어려움이 많다. 따라서 강성 확인을 위한 Subelement 단위의 시험법이 필요하다. 본 논문에서는 복합재 격자 구조물을 단위격자구조로 가공하였으며 각각 압축, 굽힘 시험을 수행하여 나선 리브, 원주 리브의 강성을 확인하였다. 휘임, 비틀림 형상을 가진 원통형 복합재 격자 구조물의 강성 평가를 위한 압축, 굽힘 시험법을 제안하였으며 유한요소해석을 수행하여 시험결과와 비교하였다.

• Tribology and Lubricants
• /
• 제32권5호
• /
• pp.141-146
• /
• 2016

The diketopyrrolopyrrole (DPP) pigment is a bicyclic 8-π-electron system containing two lactam units. Typical DPP derivative pigments have melting points of over 350°C and very low solubility in most solvents, and show absorption in the visible region with a molar extinction coefficient of 33,000 dm²mol⁻¹ and strong photoluminescence with maxima in the range 500–600 nm. X-ray structure analyses of DPP show that the whole molecule is almost in one plane. The phenyl rings are twisted out of the heterocyclic plane and the intermolecular hydrogen bonding between neighboring lactam NH and carbonyl units influences the structure of the DPP pigment in the solid state. In this study, mono-N-alkylation and mono-N-arylation were undertaken for Pigment Red 264 or Pigment Orange 73 with alkyl halide and aryl halide, respectively, in the presence of sodium tert-butoxide as a base catalyst to improve the solubility of DPP pigments and their application as CO₂ indicators. The synthetic yield was in the range 11–88%. The indicator dyes are highly soluble in organic solvents and shows pH-dependent absorption (λ_max 501 and 572 nm for the protonated and deprotonated forms, respectively) and emission (λ_max 524 and 605 nm for the protonated and deprotonated forms, respectively) spectra. The mono-N-alkylated and mono-N-arylated DPP pigment was identified by ¹H-NMR (¹H-Nuclear Magnetic Resonance Spectrometer), FT-IR (Fourier Transform Infrared Spectroscopy), and MS (Mass Spectrometry). According to the results of color and hue properties obtained by a color matching analyzer, the synthesized DPP pigment material can be used as a CO₂ indicator.