• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.10
• /
• pp.670-677
• /
• 2011

Direct numerical simulation are performed in order to investigate the effect of the circular cylinder shape on the forced convection around a circular cylinder at the Reynolds number of 300 and Prandtl number of 0.71. Three-dimensional characteristics of fluid flow and heat transfer around the smooth, wavy and torsional cylinders are investigated. A wavy cylinder has the sinusoidal variation in the cross sectional area along the spanwise direction with the wave length of ${\pi}/3$ and wavy amplitude of 0.1. A torsional cylinder has the twisted elliptic cross section with a torsional period of ${\pi}/2$ and an axis ratio of 1.35 corresponding to the major axis of 1.15 and the minor axis of 0.85. The value of time-and surface-averaged drag coefficient for the smooth cylinder is similar to that for the wavy cylinder, but larger than that for the torsional cylinder. The time and surface-averaged lift coefficient for the smooth cylinder is larger than that for the wavy and torsional cylinders. The time-averaged local heat transfer rate for the wavy and torsional cylinders shows different distribution along the circumferential direction, compared to that for the smooth cylinder because of the shape change in the spanwise direction for the cases of the wavy and torsional cylinders.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.865-871
• /
• 2017

In this paper, a gelatin layer was formed on the surface of the twisted fiber-optic couplers fabricated by hydrofluoric acid, which can be used to measure relative humidity. The proposed method of sensors has advantage of low cost compared with the sensors based on the conventional electronic devices and takes beneficial characteristics of optical fibers and light. The fiber-optic sensors presented in this study show a measurement from about 40% to 85% relative humidity, and the experimental results agree well with the calculated results. Based on the design presented in this paper, the structure will enable promising applications in the detecting humidity and various hazardous gases.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.81-89
• /
• 2012

Commonly used horizontal-axis wind turbines (HAWT) have the following structure: two or three blades, a nacelle which contains power converting equipments, generators, and a tower which supports the nacelle. The generated power is transmitted from the nacelle to the ground. Due to this structure, the power transmission lines are twisted when the nacelle is yawing. Thus, slip ring or additional yaw control mechanism is required. We propose a new structure of HAWT which is free of this transmission line problem. Moreover, the size of inverter can be reduced since two generators are connected in parallel in our mechanism so that power is distributed. A controller for yawing is developed so that it works in harmony with the controller for power generation. A MPPT (Maximum Power Point tracking) algorithm is implemented for the proposed system and efficiency of the system is validated by simulation.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.373-379
• /
• 2010

This study was carried out to develop a belt pick-up type one-row soybean cutter, using physical properties and production conditions of soybeans. The prototype soybean cutter consisted of 4 parts: cutting part, conveying part, collecting part, and travelling part. The prototype soybean cutter was designed to cut soybeans planted with a row spacing of 600 mm, and at a height of 30 mm from the bed bottom using a disk saw. Through various trials with different peripheral velocities of the disk saw and forward speed of the cutter, determined ranges of the peripheral velocity of the disk saw cutting soybeans stems were greater than 18.3 m/s. Spacing between pick-up belts (clearance) was in a range of 60~90 mm so that soybeans could be picked at heights greater than 25 cm, and the size and shape of the pick-up belt were determined the conventional manual harvesting method. The optimal ratio between the forward speed of cutter and the peripheral speed of pick-up belts were from 1 to 1.2 by theoretical analysis. the pick-up belts had a $35^{\circ}$ of tilted angle and $90^{\circ}$ of twisted angle to pick up soybeans safely from the plant input to the lower end of the belts and convey soybeans to the upper end of belts nearby a container. The soybeans at the rear container were dropped down on the soybean row with an interval. The effective field capacity of the prototype soybean cutter was 0.136 ha/h, reducing the working hour by 92% when compared with the manual cutting.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.504-508
• /
• 2010

Purpose: Traumatic telecanthus can result from nasoethmoid-orbital fractures. Repair of the medial canthal tendon (MCT) using transnasal wiring is regarded as a choice of method to treat telecanthus, however, is often complicated by incomplete anchoring and drift of canthus, extrusion of wire, in-fracture of orbital bone, and eye damage. The authors introduced oblique transnasal wiring method through the Hiraga's epicanthopalsty incision instead of well-known classical bicoronal approach. Methods: Five patients with traumatic telecanthus were treated with this method. Though the Hiraga's epicanthoplasty incision, we could approach the operative field; the medial orbital wall and detached MCT. Oblique transnasal wiring was performed as following steps. After slit skin incision on the contralateral nasal recession area, drill holes were made from this point to the superior and posterior point of lacrimal sac of deformed eye. A 2-0 wire was double-passed through the holes and MCT. Traction was applied to ensure pulling the MCT and the wires were twisted in the contralateral nose, securing the MCT in the correct position. Results: All patients except 1 person showed improvement and rapid recovery. On average each canthus was moved 5.6 mm medially. In all cases, there were no eyelashes disappear, lacrimal canaliculitis, lacrimal duct injury, or infections. Conclusion: The Hiraga's epicanthoplasty incision could give sufficient operative field to reattach the MCT in traumatic telecanthus patients. And the oblique transnasal wiring technique is effective for the Asians who have flat nose and exophthalmic eye. The authors conclude that this technique could be a simple, safe and scarless method to correct traumatic telecanthus.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1054-1057
• /
• 2004

The nitrogenated diamond-like carbon (NDLC) exhibits high electrical resistivity and thermal conductivity that are similar to the properties shown by diamond-like carbon (DLC) films. These diamond-like transparent properties in NDLC come in a material consisting of $sp^2$-bonded carbon versus the $sp^3$-carbon of DLC. The diamond-like properties and nondiamond-like bonding make NDLC an attractive candidate for applications. Liquid crystal (LC) alignment capabilities with ion beam exposure on NDLC thin films and electro-optical (EO) performances of the ion-beam-aligned twisted nematic liquid crystal display (TN-LCD) with oblique ion beam exposure on the NDLC thin film surface were studied. An excellent uniform alignment of the nematic liquid crystal (NLC) alignment with the ion beam exposure on the NDLC thin films was observed. In addition, it can be achieved that the good EO properties of the ion-beam-aligned TN-LCD. Finally, we will present the residual DC property of the ion-beam-aligned TN-LCD on the NDLC thin film surface.

• (The)Study of the Eastern Classic
• /
• no.35
• /
• pp.135-159
• /
• 2009

Since the military servants' rebellion, the society of the Goryeo(高麗) dynasty had been getting into crisis worse and worse until late in it. Late in the 14th century, the society was constantly meeting tension and chaos including decline of the Yuan(元) dynasty, sudden rise of the Ming(明) dynasty and etc. This study is aimed to investigate the idea of justice and theory of governing advocated by Yaeun Jeon Nok Saeng, who lived in such tensed and chaotic era. Under the circumstance that threatened the national power of the Goryeo dynasty in the era where the Yuan dynasty changed to Ming dynasty, his idea of justice was expressed as "Theory for Friendship with Ming and Against Yuan", which was proposed in the aspect of considering the safety and maintenance of the nation and getting back the original national power of a country Goryeo. He thought that you should not make your people bothered by or troubled in their works but you should make them concentrate on their jobs for living to govern them eased. He emphasized that you should focus on stability of people's welfare in gentle ways not bothering your people even a little bit because he thought that the situation of that era looked like a thread bobbin so that it could get naturally and easily twisted if you went in hurry.

• Cross-Cultural Studies
• /
• v.25
• /
• pp.237-265
• /
• 2011

This thesis is to argue what is the meaning of the expression of cherry blossoms appearing in "Genjimonogatari(源氏物語)" in relation with the structure of Monogatari after checking each example. First we reviewed some examples of the works before "Genjimonogatari", and clarified that cherry blossoms were used as metaphorical expressions of a beautiful woman in waka(和歌), and that at the same time cherry blossoms functioned as the symbol of futility, anxiety together with beauty. Especially in "Kokinshu(古今集)" we identified that there increased the examples where the combination of the expression as falling cherry blossoms, and fog and cherry blossoms was done. In "Genjimonogatari" we examined the examples of cherry blossoms of Chapter 1, Chapter 2, and clarified that Murasakinoue(紫の上) was a woman with an ideal character in looks and inner personality through the diverse viewpoints of characters. In Monogatari of Kashiwagi(柏木) of Chapter 2, the scene where he peeped Onnasannomiya(女三宮) was composed by the combination of cherry blossoms and fog, and we pointed out that we could feel the anxiety, ominousness of the love of the couple through this scene. And the composition of these scenes was also repeated in Monogatari of Chapter 3, and we discussed through these examples that the figurative expressions of cherry blossoms were used about the object of the love not to be realized. Next, we checked that Yugiri(夕霧) who had observed Kashiwagi's love toward Onnasannomiya gave a figurative expression of Kashiwagi's wife Ochibanomiya(落葉の宮) as cherry blossoms. Although Genji(源氏) realized Onnasannomiya's immaturity, Kashiwagi compared her to "cherry blossoms", and Yoogiri compared the woman whom Kashiwagi recognized as "Ochiba(落葉)" to "cherry blossoms", through which we have read the twisted human relation and ironical structure of Chaper 2. Finally, we checked the examples of cherry blossoms in Ooigimi(大君), Nakanokimi(中君), Ukihune(浮舟) who were Ujijujo's heroines. Ooigimi and Nakanokimi were expressed as cherry blossoms by Kaoru(?) and Nioumiya(?宮) and were disclosed as their ideal women. In contrast, Ukihune had something to do with two men with no such figurative expression, so it was pointed out that the absence of such metaphorical expression clarified that the meaning of her existence was nothing but the meaning as a mesiudo(召人).

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.904-909
• /
• 2019

Using the ion-beam irradiated indium zinc oxide (IZO) films which was cured at $100^{\circ}C$, uniform LC and homogeneous alignment of liquid crystal (LC) molecules was achieved. The IZO film was deposited on the glass substrate at the curing temperature of $100^{\circ}C$ and irradiated by the ion-beam which is an LC alignment method. To verify the LC alignment characteristics, polarizing optical microscope and the crystal rotation method were used. Additionally, it was confirmed that the LC cell with the IZO films had an enough thermal budget for high-quality LC applications. Field emission scanning electron microscope was conducted as a surface analysis to evaluate the effect of the ion-beam irradiation on the IZO films. Through this, it was revealed that the ion-beam irradiation induced rough surface with anisotropic characteristics. Finally, electro-optical (EO) performances of the twisted-nematic cells with the IZO films were collected and it was confirmed that this cell had better EO performances than the conventional rubbed polyimide. Furthermore, the polar anchoring energy was measured and a suitable value for stable LC device operation was achieved.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.3
• /
• pp.115-122
• /
• 2021

In this study, the purpose of this study was to examine the effect of twisting in the preparation of waterproofing in the process of unfolded donut-type staking method fire hoses in indoor hydrant system. The central pull-out method caused more twisting than the rolling method, and there was no significant difference in the number of twists according to the pull-out method in the case of male and female students. It was found that the time it took to untwist and prepare waterproofing was much shorter for male students. The angle valve and hose are connected, and the time to untwist and prepare for waterproofing after withdrawing the fire hose with the hose and nozzle connected was shorter than the unconnected state. In the rolling method, when a hose connected with two 15 m fire hoses was used and the angle valve-hose was connected, but the hose-nozzle was not connected, the least kinking occurred. The time to untwist and prepare for waterproofing was also the shortest. As a result, in the withdrawal method of the donut-type loaded fire hose in the indoor hydrant system, it is a rolling method rather than a central withdrawal method. With the angle valve and hose connected, unfold the fire hose with the hose and nozzle connected, if a large number of people unwind the twisted hose, the time to prepare for waterproofing can be shortened.