• Microbiology and Biotechnology Letters
• /
• v.20 no.5
• /
• pp.527-533
• /
• 1992

The optimal conditions for cellulase and xylanase production by Trichoderma reesei 28217 were studied for enzymatic deinking of old newspaper. The amounts of cellulase and xylanase from the strain was varied by initial medium pH, Tween 80, inoculum size of spore suspension, and carbon and nitrogen sources. The optimal conditions for cellulase production were pH 5.0-6.5, 0.02% of Tween 80, 0.5-1.0% of inoculum size of spore suspension ($1{\times}10^{7}$/ml). cottonseed meal as nitrogen source, and corn flour as carbon source. On the other hand, the optimal conditions for xylanase production were pH 6.5, 0.01% of Tween 80, corn steep liquor as nitrogen source, and disintegrated old newspaper as carbon source. The inoculum size for xylanase production was the same as for cellulase production. The concomitant production of cellulase and xylanase in shake flask culture was efficiently induced in the medium containing 0.5% cottonseed meal as nitrogen source and 1.0% old newspaper and 2.0% corn flour as carbon sources. In this case the activities of cellulase and xylanase produced were 6.11-7.22 IU/mJ and 97.7 IU/ml. respectively. However, the cellulase production in $5{\ell}$ fermentor scale was slightly decreased compared with that in flask scale. Moreover, xylanase production was severely reduced in a fermentor scale. The study for the reason of decreased enzyme production in fermentor is further needed.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.2 no.2
• /
• pp.94-96
• /
• 1997

A xylanase was purified from a commercial crude xylanase, Pulpzyme HC, and used for the bleaching of kraft pulp in the absence or in the presence of nonionic surfactants, Tween 20, Tween 80, and Igepal C930. The purified xylanase has a molecular weight of 23,500 as determined by a reducing SDS-PAGE. Tween 20 was most effective to enhance the efficiency of the enzymatic bleaching of kraft pulp by xylanase.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.260-263
• /
• 2002

이 연구는 과량의 유분(dodecane)으로 오염된 토양을 효율적으로 정화시키기 위한 화학적 토양세정(soil flushing)에서 알코올 성분에 의한 유동성을 고찰한 것이다. 탄소수가 다른 알코올 (methanol, ethanol, butanol)과 Tween-80 계면활성제를 세정용액으로 사용하여 혼합비, 조용매 종류 및 체류시간에 따른 세정결과를 도시하였다. 조용매 사용시 세척효율은 최대 94%(Butanol/Tween-80(w/w)=0.1) 이었다. 체류시간의 연장은 재흡착되는 admicelle의 증가로 말미암아 세정효율을 감소시키는 것으로 나타났다.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.5
• /
• pp.26-33
• /
• 2015

Batch experiments were performed to investigate the feasibility of a surfactant-enhanced soil washing process for soils heavily contaminated with crude oil in Kuwait. TPH concentration of the contaminated soil was 223,754 mg/kg, sampled from the bottom of a vaporized oil extraction pond in the Burgan reservoir field. Commercialized eight nonionic surfactants (Tween and Tergitol series) were used to measure the aqueous solubility for the crude oil. Among them, two Tergitol surfactants were used to evaluate the TPH removal efficiency of the surfactant-enhanced soil washing for heavily contaminated Kuwait soil. The solubility of the crude oil in surfactant solution was in the order Tergitol 15-S-7 > Tergitol 15-S-9 > Tergitol 15-S-12 > Tween-80 > Tween-20 > Tween-60, which showed that the crude oil solubilities of the Tergitol series were higher than those of the Tween series. The TPH removal efficiencies of 2% and 5% Tergitol 15-S-9 solution were 59% and 65%, respectively. Because the residual TPH concentration in the washed soil was still higher than the clean-up level (10,000 mg/kg), the soil washing process was repeated five times. After the fifth washing, the residual TPH concentration in the soil went down to 7,680 mg/kg and its removal efficiency was 97%.

• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.357-362
• /
• 2009

Trials to find a method for overcoming the depletion of Tricholoma matsutake mycorrhiza from the artificially inoculated pine seedling (Pinus densiflora) when it is transplanted in situ were carried out. The culturing jars containing mycorrhizal seedlings were punched at the bottom to make the jar like a pot with keeping the soil structure of the original medium in vitro, and 8 kinds of irrigation solution were applied. Irrigation of distilled water caused disappearance of T. matsutake mycorrhizae, but biweekly irrigation of 2.5% PDMP (24 g potato dextrose broth, 3 g malt extract, 1 g peptone) solution or 0.5% Tween 80 solution until 3 months of acclimation could keep mycorrhizal association stronger. The percentage of mycorrhizal roots out of total length of roots was increased during the acclimation, and the acclimation rate reached up to 70%. Thus, we recommend that the mycorrhizal pine seedlings inoculated with T. matsutake would be acclimated before transplanting into the field.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.2
• /
• pp.125-130
• /
• 2004

Paclitaxel is an effective antineoplastic drug for various cancers especially ovarian and breast cancer. This study is to find the optimum condition for the preparation of nanoemulsions and to improve the stability and loading amount of paclitaxel in nanoemulsions. Nanoemulsions were prepared by modified spontaneous emulsification solvent diffusion method. It was composed of phosphatidylcholine:cholesterol:1,2-Distearoyl-sn-Glycero-3-Phosphoethanolamine-N-[Metoxy (Polyethylene glycol)-2000]:paclitaxel at a weight ratio of 5:3:1:1 and the Tween 80 as a surfactant. The particle size and the shape of nanoemulsions were measured by particle analyzer and SEM, respectively. The loading amount of paclitaxel in nanoemulsion was measured by UV-visible spectroscopy at 227 nm. The particle sizes were $80{\sim}120\;nm$ and the loading efficiency of paclitaxel was $8{\sim}39%$. The optimum conditions for the preparation of nanoemulsions were 8% w/w phospholipid, 16% w/v Tween 80 and 2% w/w paclitaxel, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.37-44
• /
• 2003

We examined the effect of polyether-type nonionic surfactants (Brij 35, Triton X-100, Tween 20 and Tween 80) on the potentiometric properties of sodium-, potassium- and calcium-selective membranes which are prepared with widely used ionophores and four kinds of polymer matrices [poly(vinyl chloride) (PVC), polyurethane (PU), PVC/PU blend, and silicone rubber (SR)]. It was found that the PVC-based membranes, which provide the best performance among all other matrix-based membranes in the absence of nonionic surfactants, exhibited larger change in their potentiometric properties when nonionic surfactants are added to the sample solution. On the other hand, the sodium-selective SR-based membrane with calix[4]arene, potassium-selective PVC/PU- or SR-based membrane with valinomycin, and the calcium-selective SR-based membrane with ETH 1001 provide almost identical analytical performance in the presence and absence of Tween 20 or Tween 80 surfactants. The origin of nonionic surfactants effect was also investigated by interpreting the experimental results obtained with various matrices and ionophores. The results suggest that the nonionic surfactant extracted into the membrane phase unselectively form complexes with the primary and interfering ions, resulting in increased background potential and lower binding ability for the ionophore. Such effects should result in deteriorated detection limits, reduced response slopes and lower selectivity for the primary ions.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.6
• /
• pp.38-47
• /
• 2013

This study was performed to identify the optimal operating conditions and to evaluate the xylene removal efficiency, applying in-situ soil flushing with the low concentrated solution of 'Tween 80' at the xylene contaminated site. The pilot scale test site ($5m{\times}5m{\times}3m$), was mainly composed of 'sandy loam', with the average hydraulic conductivity of $9.1{\times}10^{-4}cm\;s^{-1}$. The average xylene concentration of the site was 42.1 mg $kg^{-1}$, which was more than 2.5 times higher than Korea soil pollution warning limit (15 mg $kg^{-1}$). For the soil flushing, 7,800 L of 0.1~0.2% surfactant solution was injected into three injection wells at the average injection time of 9 hr $d^{-1}$ for 10 days, followed by the additional only groundwater injection of 6,000 L. The same amount of the effluent solution was extracted from three extraction wells. From the analysis for xylene concentration of all effluent at 3 extraction wells, total 166 g of xylene was removed by in-situ surfactant flushing. Even though the residual xylene concentrations of 7 soil sampling locations in the test site were different due to the soil heterogeneity, from the comparison of xylene concentration at 7 locations before/after the feasibility test, 53.9% of the initial xylene in the site was removed from three extraction wells (mainly Ext-N and Ext-M well). The results showed that the in-situ soil flushing by using low concentrated 'Tween 80' solution had a great potential to remediate the xylene contaminated site.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2B
• /
• pp.207-212
• /
• 2009

Surfactants were used as representative anionic and non ionic surfactants to investigate the effect of mass transfer on the mineral-catalyzed Fenton-like oxidation of sorbed phenanthrene. Mass transfer of phenanthrene on the oxide surface or interlayer between aqueous and solid phases was generated by surfactant addition. Apparent solubility of phenanthrene was increased as surfactant concentration increasesd. In tests using Tween 80, oxidation of phenanthrene decreased as apparent solubility increased. High apparent solubility was not responsible for oxidation of sorbed phenanthrene in the sand due to the surfactant acted as a scavenger of degradation. In tests with SDS, $H_{2}O_{2}$ decomposition rate in Fenton-like oxidation was decreased by complexation between goethite and SDS. However, in tests using 32 mM of SDS, efficiency of phenanthrene treatment increased compared to the test without SDS addition. Therefore, suitable amount of SDS addition could provide optimum condition for phenanthrene oxidation on the oxide surface or interlayer between aqueous and solid phase, and decrease $H_{2}O_{2}$ decomposition, and as a result, phenanthrene removal efficiency can be improved.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.10
• /
• pp.1271-1277
• /
• 2008

Competitive displacement of methylcellulose (MC) absorbed at the oil-water interface was investigated by interfacial composition, surface shear viscosity, or surface tension measurements. It was found that all emulsifiers could competitively displace the interfacial MC from the oil-water interface but their behaviors were different from each other. With Tween 20 added to MC emulsion (1 wt% MC, 10 wt% n-tetradecane, 20 mM bis-tris, pH 7), MC load was steadily decreased with increasing concentrations of the emulsifier, as confirmed by surface shear viscosity measurements; moreover, there was complete MC displacement from the emulsion droplet surface at high concentration (0.1 wt%). The oil-soluble Span 80 was found to show a synergism with MC at the interface, which resulted in higher MC load at relatively low emulsifier concentrations ($\leq$0.05 wt%). At a higher emulsifier concentration (0.1 wt%) limited MC displacement was observed. These results were well supported by surface shear viscosity measurements. With water-soluble SDS, MC load was decreased with increasing concentrations of the emulsifier. Unlike Tween 20, however, it was found that at high concentrations (> 0.1 wt%), there was still some MC remaining at the droplet surface. Surface tension measurements are suggestive of an interfacial complex between MC and SDS.