• 한국정밀공학회지
• /
• 제34권3호
• /
• pp.225-225
• /
• 2017

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1121-1122
• /
• 2013

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.390-398
• /
• 1999

The thermomechanical control process(in hot rolling strip mill) was employed to produce 2.25Cr-1Mo steel, which is to be construction material for the steam generator for power plant. Although the Conventional processes has been the primary means of producing the 2.25Cr-1Mo steel, an alternative method was used to meet the specification of ASTM heat treatment for A387-22-Classl using autotempering after coiling in hot rolling strip mill. The microstructures, tensile properties at various temperatures, and creep-rupture properties have been investigated to compare the properties with those of materials produced by the conventional process and to certify the application of the thermomechanical control process to an actual process of manufacturing 2.25-Cr-1Mo steel, this in turn, will reduce the cost of the process. About 14 to 34% glanular bainite (remainder proetectoid ferrite) formed in a coil, and this variety of volume fraction stems from the different cooling rates, which varies with position of the coil after coiling. Tensile testing from room temperature to 700$^{\circ}C$ indicated that strength increases with test temperature showing peaks at around 600$^{\circ}C$. Creep-rupture properties have been being investigated at the temperature of 500$^{\circ}C$ with 27.5, 32kg/$\textrm{mm}^2$ loads and have showed no rupture for over 1000 hours.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.16-21
• /
• 2012

The purpose of this study is to try to find the risk of roller(mixing mill) in working site. In order to achieve the purpose, accident analysis and survey was carried out. This analysis revealed that average of loss days is 334.3 by roller jamming accident and 229.2 by other causes. It means jamming accident entails serious bodily harm. According to our research, we realize that most of rollers have some risk of the jamming accidents. It is simply because the roll gap in the roller is not more than 10cm. It also does not meet minimum distance so as to avoid the risk for jamming accident by KS. Furthermore, 28% of rollers have only one switch and 40% of rollers have two switches operating emergence stop equipment so as to reduce the risk of jamming accidents. Therefore, we presume that it is very difficult to turn on the switch of emergence stop equipment when they confront the accident because most of engineers are working alone.

• 한국생산제조학회지
• /
• 제24권5호
• /
• pp.508-513
• /
• 2015

In this study, the effect of the helix angle and rake angle of a flat end-mill in the milling of titanium alloy was investigated. Tool shape parameters such as helix angle and rake angle affect the cutting force, cutting zone temperature, vibration, and chip flow mechanism, which in turn determine tool life, surface integrity, and dimensional accuracy of the milling process. To investigate the effect of the helix and rake angles, a certain range of parameters was selected, and three-dimensional tool models were generated for finite element analysis (FEA) for each case. The cutting force and pressure on the tool flank face and rake face were investigated by FEA. Further, several tool models were proposed for machining tests. The cutting force characteristics were investigated by the machining tests.

• 한국세라믹학회지
• /
• 제11권1호
• /
• pp.23-28
• /
• 1974

1. Stage crushing by jaw crusher, steel mortar, and ball mill in turn has shown an inclination to increase the distribution of andalusite in coarse particles as well as to increase that of micas in fine particles. 2. Water elutriation was effective for the removal of muscovite and magnetic separation was effective for that of Mg-Fe micas such as biotte and chlorite. The process of concentration and that of purification are diagramatized respectively as follows: Concentration; Raw andalusite${\lightarrow}$Crushing${\lightarrow}$Screening${\lightarrow}$Water elutriation${\lightarrow}$Magnetic separation Purification; Concentrated andalusite${\lightarrow}$Calcination${\lightarrow}$Ball milling${\lightarrow}$Screening${\lightarrow}$Water elutriation${\lightarrow}$Magnetic separation${\lightarrow}$Acid washing.

• 한국정밀공학회지
• /
• 제26권4호
• /
• pp.23-32
• /
• 2009

• 수산해양기술연구
• /
• 제30권4호
• /
• pp.312-319
• /
• 1994

Recently, with the rapid development in the industries such as an iron mill and chemical plants, there is enlarged by the use of the piping. Sepecially, the piping connected with a fluid, if it is increase the speed of running fluid, ought to generate cavitation phenomenon with unbalanced pressure. So, the cavitation phenomenon cause serious damage of the piping, because it generate erosion and corrosion in the piping. In this study, the steel pipe piping water (SPPW) and SPPW on weldment were tested by using of cavitation-erosion test apparatus with nozzle and were investigated under the marine environment of liquid. (specific resistance : 25 $Omega$. cm) The main results obtained are as follows : 1) The total weight loss and weight loss rate of affected zone of weldment by corrosion-erosion in the sea water are more increased than that of base metal. 2) The electrode potential by corrosion-erosion in the sea water becomes less noble than that of base metal, and current density is more increased. 3) As time goes by, the total weight loss and weight loss rate by cavitation erosion-corrosion in air-liquid 2 phase flow become more increased then those in only liquid solution. but these values turn to be decreased.

• 한국대기환경학회지
• /
• 제12권3호
• /
• pp.307-314
• /
• 1996

The rate of evolution of ethylent by tomato plants was rapidly increased by ozone fumigation. In the present study, the mechanism of ethylent evolution by ozone was investigated in experiments with aminoethoxyvinylglycine (AVG) and tiron, which inhibit the formation of ethylene and peroxidation of lipids, respectively. Pretreatment with AVG significantly inhibited the ozone-induced ethylent evolution, but the treatment of plants with tiron did not inhibit. These results indicate that the induction of the evolution of ethylene by ozone involves the pathway via aminocyclopropane-1-carboxylate (ACC), while not released as a result of the peroxidation of lipids. Ozone-induced ethylent evolution was greater in dar- than light-incubated, intact tomato plants. The difference between dark- and light-ethylene evolution was examined with diuron, an inhibitor of photosynthetic electron transport. The inhibitor treatment promoted ethylent evolution. These results suggest that ethylent retention and metabolism in plants were regulated by internal $CO_2$ levels which, in turn, were controlled in large part by photosynthesis. Thus, ethylene was retained in illuminated leaf tissue under low intenal $CO_2$ concentration which may develop in a sealed container without exogenously supplied $CO_2$.

• Journal of Plant Biology
• /
• 제3권1호
• /
• pp.32-38
• /
• 1960

Since the peculiar virus disease of chinese date tree (Zizyphus jujuba Mill. var. inermis Rehd.) has been noted in South Korea around 1950, 70% to 80% of the economically important trees have been either completely destroyed or infected with the virus, severe damage has been noted, particularly, across the area ranged from middle east to the middle part of Korea, including Seoul area. Yoon-Koock-Byung in 1958 first reported the disease and descirbed it might be caused by a kinds of yellows. But he did not conform in his paper that the disease is pecisely caused by yellows virus. The authors, hereby intend to identify the true cause of the desease of the chinese data tree by studying the external symptoms of the disease and the internal morphological characteristics of the diseaset plant which shows various abnormalities in contrast to the healthy checks. In view of fact that leaves of the infected plants become yellowish in color similar to the peach yellows, aster yellows, it is likely to be identifiable as the common yellows. Furthermore, the abnormal characteristics observed by the authors are as follow: The floral organs such as petals, sepals, stamens, and pistil turn into vegetative leaves, the leaves on heavily infected plant appear as small sized one and also showing as a common witch's broom like symptom. There are also an occuring of numerous advantitious shoots developed from both of stems and roots. The amount of photosynthetic starch grains increases in parenchymatous cells, necrosis takes place in mesophyll, Particularly, Palisade Parenchyma in the leaves of infected plants are distinguished in contrast to the healthy checks. From the symptoms and the present experimetns described above, the authors are believed that the disease of chinese data tree is not caused by the yellows. It appears the disease is rather similar to the symptoms of sandal spike virus which was noted in India early in this centry. But the host plant of standal disease, Santalum albun L. and the insect vector, Jassus indicus Wal., have never been reported in Korean flora and the founa. The termperature and the otehr environmental factors is quite different Korea and India. Thus the authors believe that the peculiar disease must be an endemic new virus origin in Korea and must be called as "shoot cluster disease of chinese date tree."