• 한국소음진동공학회논문집
• /
• 제22권10호
• /
• pp.994-1002
• /
• 2012

Acoustic power transmission loss(TL) is an important performance of the muffler system. TL will be affected by the velocity of the fluid in duct since acoustic pressure varies according to the fluid velocity. In this paper, two kinds of fluid model, potential flow and turbulent flow, for the fluid flowing in simple expansion chamber are considered. The effects of their two fluid models in acoustic TL are investigated for the straight and L-shaped simple expansion chamber. In higher frequency range, the characteristics of TL of the two fluid models show different results. The variation of TL according to the fluid velocity is shown more distinctly when turbulence model is used. Turbulent flow model should be used to obtain better estimation of acoustic TL in higher frequency range.

• 대한기계학회논문집B
• /
• 제38권5호
• /
• pp.423-430
• /
• 2014

파이프 유동 내에서 일어나는 소음 및 진동현상의 경우 일반적으로 난류유동과 근처의 벽면사이의 유동유기진동에 의해 일어나게 된다. 복잡한 난류유동을 가지는 확장관의 단순한 경우에서 본 연구는 수행되었지만, 방사소음의 경우 주어진 모델에서 크기와 형상 그리고 두께 등에 상당히 영향을 받게 된다. 또한, 방사소음은 그 파가 퍼져나가면서 주위 시스템에 교란특성이나 불안정성을 야기시키게 되는데 결국 중요한 파단과 파손을 일으키게 된다. 본 연구는 다양한 상용프로그램들 (Fluent, NASTRAN, 그리고 VIRTUAL LAB)을 이용하여 이러한 현상을 파악하고자 하였다. 이 연구를 통해 유동소음에 있어 깔려있는 물리현상들을 이해하고자 하였다. 확장관의 경우 단면적의 급격한 변화에 의해 박리와 높은 압력강하를 겪게 되는데, 방사소음의 계산으로 이 방사소음의 크기가 100에서 500Hz영역에서 전체적으로 약 20dB정도 감소시킬 수 있는 것을 확인할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.646-651
• /
• 2002

The flow field around a symmetrical airfoil in a uniform flow under the generation of noise was studied by experiments and numerical simulation. The experiments are conducted by visualizing the surface flow over the airfoil with a shear-sensitive liquid-crystal coating and by measuring the instantaneous velocity field around the trailing edge of the airfoil. The results indicate that the discrete frequency noise is generated when the separated laminar flow reattaches near the trailing edge of the pressure side and the turbulent boundary layer is formed over the suction side of the airfoil near the trailing edge. The periodic behavior of vortex formation was observed around the trailing edge and it persists further downstream in the wake. The frequency of the vortex formation in the wake was consistent with that of the discrete frequency noise.

• 소음진동
• /
• 제9권1호
• /
• pp.113-120
• /
• 1999

A perforated tube nozzle as an exhaust noise suppressor of a high-speed civil transport(HSCT) is proposed. The experimental results for the near and far field sound. the visualization of jet structures and the static pressure distributions in the jet passing through a perforated tube are presented and discussed in comparison with those for a simple tube. It is shown that the perforated tube has an excellent performance to greatly reduce the shock-associated noise and that also the turbulent mixing noise is reduced in the range of a limited jet pressure ratio. This considerable noise reduction is due to the pressure relief caused by the through-flow through the perforated holes. Such a pressure relief results in the transformation of normal shock waves into weak Mach waves of X -type and increases the thrust force of the perforated tube nozzle.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.249-253
• /
• 2005

The turbulence noise generated from blunt trailing-edge is numerically predicted by using the hydrodynamic/acoustic splitting method at the Reynolds number based on thickness of flat plate, $Re_h=1000$, and the freestream Mach number $M_o=0.2$. The turbulent flow field is simulated by incompressible large-eddy simulation and the acoustic field is predicted efficiently with the linearized perturbed compressible equations (LPCE) recently proposed by the authors. The turbulent flow characteristics are validated with the results of the previous experimental study and direct numerical simulation. The acoustic properties predicted from LPCE are compared with the solutions of analytical formulations.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권4호
• /
• pp.509-514
• /
• 2000

A numerical study has been performed to design duct parameters in the freezer of a domestic refrigerator. The visualization results of FDM analysis using the standard k-$\varepsilon$ model with inlet boundary conditions modelled in this paper show good agreements with the experimental ones in prediction overall flow characteristics. Dominant vortex flows are found in the left upper and right lower corners, while there exists large turbulent kinetic energy around the fan and right upper side of the fan. It, in turn, has effects on the performance and noise. It is recommended to locate the outlet far away from the fan in order to reduce the noise level.

• Journal of Mechanical Science and Technology
• /
• 제20권11호
• /
• pp.1993-2001
• /
• 2006

The piezoelectric bimorph film, which, as an actuator, can generate more effective displacement than the usual PVDF film, is used to control the turbulent boundary-layer flow. The change of wall pressures inside the turbulent boundary layer is observed by using the multi-channel microphone array flush-mounted on the surface when actuation at the non-dimensional frequency $f_b^+$:=0.008 and 0.028 is applied to the turbulent boundary layer. The wall pressure characteristics by the actuation to produce local displacement are more dominantly influenced by the size of the actuator module than the actuation frequency. The movement of large-scale turbulent structures to the upper layer is found to be the main mechanism of the reduction in the wall- pressure energy spectrum when the 700$700{\nu}/u_{\tau}$-long bimorph film is periodically actuated at the non- dimensional frequency $f_b^+$:=0.008 and 0.028. The biomorph actuator is triggered with the time delay for the active forcing at a single frequency when a 1/8' pressure-type, pin-holed microphone sensor detects the large-amplitude pressure event by the turbulent spot. The wall-pressure energy in the late-transitional boundary layer is partially reduced near the convection wavenumber by the open-loop control based on the large amplitude event.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.365-370
• /
• 2000

A computational study on the effect of sweep angle of axial fan on its noise is performed in the present paper. The forward swept axial fan was designed by numerical optimization method incorporated with three dimensional flow analysis. The objective function was defined by the ratio of generation rate of turbulent kinetic energy to pressure head. And, two variables related with sweep angle distribution are used for design variables. The swept fan has better performance characteristics and noise level. The experimental result shows that spectrums of no-sweet and swept fans have differences in the blade passage frequency, especially in the broadband. And the overall noise level of swept fan is lower 10dB(A) than that of no-sweep fan. For the comparison of flow fields between no-sweep fan and swept fan, CFX-TASCflow computational fluid dynamics software is used. Standard k-${\varepsilon}$ model is used for the turbulence model. Distributions of pressure and turbulent kinetic energy distributions are compared in order to find what happen in the low-noise swept fan.

• 대한공업교육학회지
• /
• 제33권2호
• /
• pp.273-286
• /
• 2008

수중에서 UUV(Unmanned Underwater Vehicle)에 장착되는 수중 음향 센서 배열은 UUV의 측면이나 전면에 부착하여 외부 신호를 탐지하게 된다. 이러한 센서 배열은 UUV의 특성상 곡면배열(Conformal array) 형태이며 유체 유기 소음의 영향을 받는다. 따라서 본 논문에서는 탄성층에 삽입된 하이드로폰이 외부 유입 소음의 영향을 받는 정도를 해석하였다. 유입 소음은 난류 경계층에서 발생하는 Corcos 모델을 이용하였고 주파수 밀도 함수를 이용하여 수치해석 하였다. x-방향의 파수인 kx에 다른 전달함수의 특성은 탄성층의 두께가 커질수록 전달함수의 적분값은 적어지므로 소음의 영향은 줄어드는 것으로 나타났다. 또한 탄성층 및 고정판의 탄성계수, 밀도 등의 변화가 전달함수 값의 변화를 일으키는지를 조사하였다. 향후 이러한 연구는 UUV에 장착되는 곡면 배열 센서의 설계에 활용할 수 있을 것으로 판단된다.

• 대한기계학회논문집B
• /
• 제24권7호
• /
• pp.945-956
• /
• 2000

The axisymmetric bodies considered in this study have hemispherical and ellipsoidal noses. The near-field pressure fluctuations over each nose model at $Re_D=2.43{\times}10^5$ were investigated in the laminar separation region and developing turbulent boundary layers using a 1/8' pin-holed microphone sensor. The wall pressure fluctuations were also measured in an axisymmetric boundary layer on a cylinder parallel to mean flow at a momentum thickness Reynolds number of 850 and a boundary layer thickness to cylinder radius ratio of 1.88.