• 한국안전학회지
• /
• 제31권2호
• /
• pp.18-25
• /
• 2016

The incandescent lamp is an electric light fixture with a tungsten filament heated to a high temperature, by passing an electric current through it, until it glows with visible light. The hot filament is protected from oxidation with a glass bulb that is filled with inert gas. The incandescent lamp has fire risk when combustible materials are close to its glass bulb. Because its lamp has the property which converts 90~95 percents of the electric power to heat energy. 2015 national fire statistics show that fires caused by lighting fixtures were 652 cases, and incandescent lamps(44 cases) and halogen lamps(53 cases) accounted for 15 percents in those of high heating light fixtures. Since incandescent lamp fires account for about 45 percents in the high heating light fixture, we could not overlook the fire risks by the incandescent lamp. Although many studies related with those have been conducted, incandescent lamp fires are continuously occurred. This study was carried out to study the fire risk of ignition of wood due to radiant heat of incandescent lamp. Radiant heat flux of the incandescent lamp was predicted by applying point source model, and critical distance for ignition of wood was calculated by applying integral model. The results from this study could applied to fire prevention activities related to light bulb, and it could be used in fire cause investigations related to radiant heat of incandescent lamp.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2446-2452
• /
• 2009

A Ceramic Metal-halide lamp is achieved by adding multiple metals to a basic mercury discharge. Because the vapor pressure of most metals is very much lower than mercury itself, metal-halide salts of the desired metals, having higher vapor pressures, are used to introduce the material into the basic discharge. The metal compounds are usually polyatomic iodides, which vaporize and subsequently dissociate as they diffuse into the bulk plasma. Metals with multiple visible transitions are necessary to achieve high photometric efficiency and good color. Compounds of Sc, Dy, Ho, Tm, Ce, Pr, Yb and Nd are commonly used. The maximum visible efficacy of a Ceramic Metal Halide lamp, under the constant of a white light source, is predicted to be about 450lm/W. This is controlled principally by the chemical fill chosen for a particular lamp. Current these lamps achieve 130lm/W and these life time are the maximum 16,000[hr]. So factors of performance lower are necessary to improve lamp performance. In this paper, we analyzed factors of performance lower by accelerated deterioration test. The lamp was operated with short duration turn-on/turn-off procedure to enhance the effect due to electrode sputtering during lamp ignition. The tested lamp that was operated with a longer turn-on/off(20/20 minutes) showed blackening, changed distance between electrodes and lowered color rendering & color temperature by losses of Dy at 421.18nm, I at 511nm, T1 at 535nm and Na at 588nm compared with the new lamp.

• 자원환경지질
• /
• 제13권2호
• /
• pp.117-127
• /
• 1980

Molybdenum as by-products of Sangdong tungsten mine occurrs in the form of molybdenite in quartz vein. The molybdenum contents of scheelite in Sangdong ore bodies ranges from trace to 8%, therefore the scheelites show variable fluorescence colores under ultra-violet lamp (short wave). The fluorescence color are in order high content of molybdenum, yellow, white and blue. The yellow fluorescing scheelite is dominant in upper ore vein, otherwise the blue fluorescent variety is dominant in lower ore vein. The fluorescence color of scheelite in the main ore vein show zonal distribution becoming progressively more blue outerwards, contrary more yellow innerwards, and even in single scheelite crystal, simillar zonal pattern is observed, too. Molybdenite occurrs as flakes or elongated blades at the margins of the quartz vein only molybdenite bearing quartz veins but also other sulfides mineral bearing quartz veins have mainly blue flourescing scheelites. We suggest that the molybdenum contents of the early stage ore solution are progressively decreased by a subsequent crystallization of the yellow fluorescing scheelites.

• Journal of Electrical Engineering and Technology
• /
• 제6권1호
• /
• pp.123-127
• /
• 2011

To clarify the relations of optical properties to the main factors responsible for the loss and damage of luminous efficacy, a 20 min turn-on/turn-off test for 2,000 h for a ceramic metal halide lamp is conducted. The corrosion rates of the arc tube wall and electrode are estimated based on thermal stress. Wall blackening is attributed to the tungsten being transported from the hot electrode tips to the relatively cold arc tube wall. Furthermore, the grain boundaries of the arc tube are changed by the degradation. Distortion of the electrode is observed, and the ignition and the driving voltage of the load both increase. Finally, the color rendering index and the color coordinates are changed after the degradation. The luminous flux and the intensity of the luminous distribution are decreased significantly.

• 대한전자공학회논문지
• /
• 제25권6호
• /
• pp.647-653
• /
• 1988

A rapid thermal annealing system using tungsten halogen lamp has been designed and assembled. A control scheme where the temperature control is executed with calculated wafer temperature by considering the thermocouple delay rather than measured thermocouple temperature,is proposed. This control scheme gives more accurate control of the wafer temperature. In addition, the distribution of transmitted light power to the wafer in the system has been simulated, and lamp interval modification has been able to give more uniform light power distribution. Considering incident light spectrum, absorption, reflection, radiation of silicon, etc., temperature profile has been simulated. When the light power uniformity on the 3" wafer is below 1%, the temperature uniformity is about 2%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.299-303
• /
• 1991

A lamp heated LPCVD equipment has been made. Wafer is heated by an array of fifteen tungsten halogen lamps above the front side of a wafer and pyrometer views the back side of the wafer through $CaF_2$ window. Reactor which consisits of a quartz window and a water cooled-stainless steel plate can be evacuated to $5{\times}10^{-3}$ torr with a rotary vane pump. By pyrolysis of $SiH_4$ at about $600^{\circ}C$, polysilicon has been formed on the silicon dioxide film. The measured results show that thickness nonuniformity is 15% and temperature nonuniformity is 1.1%. Because activation energy of pyrolysis of $SiH_4$ is very high, about 1.8eV, small temperature variation will induce large thickness nonuniformity. The main cause of temperature nonuniformity is unsymmetry of lamp power and an unbalanced cooling structure. Charls & Evans' SIMS result shows that the oxygen content in the deposited polysilicon is comparable to that of silicon substrate but carbon content is ten times higher.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2262-2267
• /
• 2010

In order to analyze the reason of wall blackening, which affect the decline of lifetime in a ceramic metal halide lamp, we carried out the deterioration of ceramic tubes by a change in operating conditions with arc tubes of two types of spherical and cylindrical, and we have confirmed the cause of wall blackening through the analysis of element composition and spectrum from SEM/EDS and spectrum analyzer. Wall blackening of tungsten was shown by sputtering from ignition in 20 minute on/off condition and wall blackening from chemical reaction between PCA wall and rare earth halides was shown significantly in a condition without on/off test. Especially, the wall blackening and the decline of luminous flux were reduced by inner convection in spherical type arc tube. Moreover, the color temperature and color coordinate were changed by reduction of emission spectrum of Dy which causes the chemical reaction with PCA wall.

• 한국안광학회지
• /
• 제4권2호
• /
• pp.33-38
• /
• 1999

다색 광원에 대한 가우시안 진폭을 갖는 광학계의 결상 특성을 조사하기 위하여 다색 광원에 대한 결상 광학계의 색도(chromaticity) 변화와 조도(illuminance) 분포를 계산하였다. 본 논문에서 고려된 다색 광원은 색온도 2,856K인 텅스텐 백열 램프(incandescent-tungsten lamp)를 나타내는 A광원, 대낮의 평균 햇빛(daylight)을 나타내는 C광원, 대낮의 평균 햇빛의 파장영역을 자외선 영역까지 확대하여 보강한 $D_{65}$광원이다. 다색 광원들의 종류에 따라 기하학적 상점에서의 색도 값이 다르게 나타났으며, 기존의 균일한 진폭을 갖는 광학계에 비해 색도 변화가 매우 작게 나타났다. 조도 분포는 다색 광원의 종류에 따라 거의 변화가 없었으며, 초점 심도는 기존의 균일한 진폭을 갖는 광학계에 비해 크게 나타났다. 이러한 결과로부터 결상 광학계에 입사하는 광의 진폭 형태를 균일한 진폭에서 가우시안 형태로 변조시켜줌으로써 초점 심도는 크게, 색도 변화는 작게 할 수 있다.

• 한국콘텐츠학회논문지
• /
• 제16권11호
• /
• pp.693-698
• /
• 2016

학대나 폭력을 입증할 수 있는 증거 중 하나인 멍은 크게 외력에 의한 것과 음압에 의한 것으로 나뉜다. 외력에 의해 생성된 멍에 관한 연구는 많지만, 음압에 의해 생성된 멍에 관한 연구는 적다. 적외선 광원으로 멍을 촬영한 선행연구들을 살펴보면 하나의 적외선 광원과 필터만을 사용하여 실험했다는 문제점이 있다. 본 실험의 연구자들은 적외선 광원과 필터의 조합에 따라 멍의 촬영 결과물이 다른 양상을 보일 것으로 생각하였다. 따라서 세 종류의 적외선 광원과 다섯 종류의 적외선 필터를 사용하여 음압에 의해 생성된 멍을 촬영하는데 최적의 조합을 찾고자 하였다. 그 결과 750 nm 영역을 포함하는 텅스텐과 이 영역을 투과시키는 필터인 Kodak Wratten #18A를 사용했을 때 가장 좋은 결과를 얻을 수 있었다.

• 천문학회보
• /
• 제36권2호
• /
• pp.155.2-155.2
• /
• 2011

We present development of the calibration system for IGRINS (the Immersion GRating Infrared Spectrograph). We mainly use Th-Ar and U hollow cathode lamp as the spectral calibration source and telluric features can be used additionally. For the flat source, we selected a 3000K tungsten halogen lamp with 2 inch integrating sphere. From Light Tools simulation, the result flat image through calibration optics satisfied <1% flatness error requirement. We also present mechanical design of calibration box that will be attached on the IGRINS dewar. Three moving stages are designed to perform switching mechanism between all of the observing modes - target observation, flat, precision RV measurement, and spectro-polarimetric observation.