• 대한화학회지
• /
• 제13권1호
• /
• pp.49-55
• /
• 1969

螢光X線을 利用하여 珪酸鹽鑛物中의 主成分인 $SiO_2$, $Al_2O_3$, $Fe_2O_3$, CaO, MgO 및 $K_2O$를 迅速히 分析할 目的으로 試料의 處理 測定 및 各條件에 對하여 檢討하였다. 試料를 Lithium Tetraborate로 용융하여 300Mesh 以上의 微粉末로 한後 40,000Lb의 壓力으로 成型하여 Tungsten과 Chromium 對陰極의 X-線管과 LiF, EDDT, ADP의 分光結晶을 使用하여 測定하였다. 各成分에 對한 檢量曲線은 Matrix Effect를 고려하여 N.B.S 및 International Rock Standard를 選定 使用하였고 Lanthanum Oxide 및 Binder로서 Borie Acid를 첨가하여 얻었다. 各成分에 對하여 本法의 再現性 및 誤差를 檢討하기를 爲하여 I.R.S T-1을 使用하여 測定한 結果 0.47($SiO_2$), 0.85($Al_2O_3$), 0.05($Fe_2O_3$), 0.07(caO), 0.02($K_2O$), 0.13(MgO)의 標準偏差를 얻었다. 또한 化學分析植에 對한 偏差를 求하고져 Clay, Kaoline, Alunite, Wallastonite 및 Zeolite 等의 珪酸鹽鑛物을 選定하여 化學分析 및 本法에 依한 分析結果를 비교하였다.

• Nuclear Engineering and Technology
• /
• 제40권1호
• /
• pp.21-36
• /
• 2008

High bum-up fuel technology has been developed through a national R&D program, which covers key technology areas such as claddings, $UO_2$ pellets, spacer grids, performance code, and fuel assembly tests. New cladding alloys were developed through alloy designs, tube fabrication, out-of-pile test and in-reactor test. The new Zr-Nb tubes are found to be much better in their corrosion resistance and creep strength than the Zircaloy-4 tube, owing to an optimized composition and heat treatment of the new Zr-Nb alloys. A new fabrication technology for large grain $UO_2$ pellets was developed using various uranium oxide seeds and a micro-doping of Al. The uranium oxide seeds, which were added to $UO_2$ powder, were prepared by oxidizing and heat-treating scrap $UO_2$ pellets. A $UO_2$ pellet containing tungsten channels was fabricated for a thermal conductivity enhancement. For the fuel performance analysis, new high burnup models were developed and implemented in a code. This code was verified by an international database and our own database. The developed spacer grid has two features of contoured contact spring and hybrid mixing vanes. Mechanical and hydraulic tests showed that the spacer grid is superior in its rodsupporting, wear resistance and CHF performance. Finally, fuel assembly test technology was also developed. Facilities for mechanical and thermal hydraulic tests were constructed and are now in operation. Several achievements are to be utilized soon by the Korea Nuclear Fuel and thereby contribute to the economy and safety of PWR fuel in Korea

• 한국재료학회지
• /
• 제29권4호
• /
• pp.241-251
• /
• 2019

There are several manufacturing techniques for developing thermionic cathodes for vacuum ultraviolet(VUV) ionizers. The triple alkaline earth metal emitters(Ca-Sr-Ba) are formulated as efficient and reliable thermo-electron sources with a great many different compositions for the ionizing devices. We prepare two basic suspensions with different compositions: calcium, strontium and barium. After evaluating the electron-emitting performance for europium, gadolinium, and yttrium-based cathodes mixed with these suspensions, we selected the yttrium for its better performance. Next, another transition metal indium and a lanthanide metal neodymium salt is introduced to two base emitters. These final composite metal emitters are coated on the tungsten filament and then activated to the oxide cathodes by an intentionally programmed calcination process under an ultra-high vacuum(${\sim}10^{-6}torr$). The performance of electron emission of the cathodes is characterized by their anode currents with respect to the addition of each element, In and Nd, and their concentration of cathodes. Compared to both the base cathodes, the electron emission performance of the cathodes containing indium and neodymium decreases. The anode current of the Nd cathode is more markedly degraded than that with In.

• 한국전기전자재료학회논문지
• /
• 제35권3호
• /
• pp.275-280
• /
• 2022

An all-solid-state electrochromic film was fabricated by laminating tungsten oxide (WO₃) and nickel oxide (NiO) thin films deposited by a reactive DC magnetron sputtering on flexible ITO films. The influence of oxygen partial pressure on the crystal structure, microstructure, optical properties, and electrochromic properties of WO₃ and NiO thin films were investigated. WO₃ and NiO films showed the best electrochromic properties under the flow of Ar:O₂=80:20 and Ar:O₂=90:10, respectively. The EC film fabricated with an optimized WO₃ and NiO films showed a high coloration efficiency, a fast response time, and a stable optical modulation. It is expected that flexible EC window films will pave the way for the next-generation energy-saving windows.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.282.1-282.1
• /
• 2016

The remarkable physical properties of two-dimensional (2D) semiconducting materials such as molybdenum disulfide ($MoS_2$) and tungsten disulfide ($WS_2$) etc. have attracted considerable attentions for future high-performance electronic and optoelectronic devices. The ongoing studies of $MoS_2$ based nonvolatile memories have been demonstrated by worldwide researchers. The opening hysteresis in transfer characteristics have been revealed by different charge confining layer, for instance, few-layer graphene, $MoS_2$, metallic nanocrystal, hafnium oxide, and guanine. However, limited works built their nonvolatile memories using entirely of assembled 2D crystals. This is important in aspect view of large-scale manufacture and vertical integration for future memory device engineering. We report $WS_2$ based nonvolatile memories utilizing functional van der Waals heterostructure in which multi-layered graphene is encapsulated between $SiO_2$ and hexagonal boron nitride (hBN). We experimentally observed that, large memory window (20 V) allows to reveal high on-/off-state ratio (>$10^3$). Moreover, the devices manifest perfect retention of 13% charge loss after 10 years due to large graphene/hBN barrier height. Interestingly, the performance of our memories is drastically better than ever published work related to $MoS_2$ and black phosphorus flash memory technology.

• E2M - 전기 전자와 첨단 소재
• /
• 제16권9호
• /
• pp.63.1-63
• /
• 2003

Catalytic chemical vapor deposition (Cat-CVD) has been developed to deposit alumina(Al$_2$O$_3$) thin films on silicon (Si) crystal using N$_2$ bubbled tir-methyl aluminium [Al(CH$_3$)$_3$, TMA] and molecular oxygen (O$_2$) as source species and tungsten wires as a catalyzer. The catalyzer dissociated TMA at approximately 600$^{\circ}C$ The maximum deposition rate was 18 nm/min at a catalyzer temperature of 1000 and substrate temperature of 800$^{\circ}C$. Metal oxide semiconductor (MOS) diodes were fabricated using gates composed of 32.5-nm-thick alumina film deposited as a substrate temperature of 400oC. The capacitance measurements resulted in a relatively dielectric constant of 7, 4, fixed charge density of 1.74*10e12/$\textrm{cm}^2$, small hysteresis voltage of 0.12V, and very few interface trapping charge. The leakage current was 5.01*10e-7 A/$\textrm{cm}^2$ at a gate bias of 1V.

• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1794-1798
• /
• 2014

Graphitic g-$C_3N_4-WO_3$ composite was synthesized simply by decomposing melamine in the presence of $WO_3$ at $500^{\circ}C$. The obtained material was characterized by XRD, SEM, IR and XPS. The results showed that the as-prepared composite exhibits orthorhombic $WO_3$ phase coated by g-$C_3N_4$ and the g-$C_3N_4$ decomposed completely with N-doped $WO_3$ remaining at elevated calcination temperatures. The photocatalytic activity of the composite was evaluated by the photodegradation of methylene blue under visible light. An enhancement in photocatalytic activity for the graphitic g-$C_3N_4-WO_3$ composite compared to the conventional nitrogen-doped $WO_3$ was observed, which can be attributed to the presence of g-$C_3N_4$ in the material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.237-238
• /
• 2008

The films of Vanadium tungsten oxide, $V_{1.85}W_{0.15}O_5$, were grown on Pt/Ti/$SiO_2$/Si substrate by RF sputtering method. The $V_{1.85}W_{0.15}O_5$ thin films deposited on Pt/Ti/$SiO_2$/Si substrates by RF sputtering method exhibited fairly good TCR and dielectric properties. It was found that film crystallinity, dielectric properties, and TCR properties were strongly dependent upon the annealing temperature. The dielectric constants of the $V_{1.85}W_{0.15}O_5$ thin films annealed at $300^{\circ}C$ were 55, with a dielectric loss of 1.435, respectively. Also, the TCR values of the $V_{1.85}W_{0.15}O_5$ thin films annealed at $300^{\circ}C$ were about -3.6%/K.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.236.1-236.1
• /
• 2014

Compounds of Ga, such as gallium oxide (Ga2O3) and gallium nitride (GaN), are of interest due to its unique properties in semiconductor application. In particular, GaN has the potentially application for optoelectronic device such as light-emitting diodes (LEDs) and laser diodes (LDs) [1]. Nanoparticle is an interesting material due to its unique properties compared to the bulk equivalents. In this report, we develop a synthesizing method for gallium nitride nanoparticle using non-thermal plasma. For gallium source, the gallium is heated by thermal conduction of tungsten boat which is heated by eddy current induced from RF current in antenna. Nitrogen source for nanoparticle synthesis are from inductively coupled plasma with N2 gas. The synthesized nano particles are analyzed using field-emission scanning microscope (FESEM), transmission electron microscope (TEM) and x-ray photoelectron spectroscopy (XPS). The synthesized particles are investigated and discussed in wide range of experiment conditions such as flow rate, pressure and RF power.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.630-635
• /
• 2009

For use as a photocatalyst, bismuth tungsten oxide, $Bi_2WO_6$, was successfully synthesized by hydrothermal treatment at pH = 11 and heating at 200 ${^{\circ}C}$ for 24h, and samples were subsequently thermal treated at 400, 600, and 800 ${^{\circ}C}$ to increase crystallinity. TEM results revealed that the initial untreated particles were sheet‐shaped, grain size was below 80 nm, and it increased with treated temperatures. These $Bi_2WO_6$ samples absorbed at around 400 nm in the visible light range and the intensity of absorption was particularly strongest in samples thermal treated at 600 ${^{\circ}C}$. Their photoluminescence abilities, related to the recombination between the excited electrons and holes, were overall small for other general photocatalysts such as TiO2, and the smallest in the case of thermal treatment at 600 ${^{\circ}C}$, as reversible result of UV‐visible absorbance. Methyl orange of 5.0 ppm aqueous solution was almost completely removed after 2 h when treated over the $Bi_2WO_6$ thermal treated at 600 ${^{\circ}C}$.