• Journal of Korea Port Economic Association
• /
• v.37 no.4
• /
• pp.89-102
• /
• 2021

The purpose of this paper is to study the impact of shipping service firm's perceived relational benefits on switching barriers and loyalty focusing on tug boat service. To achieve the purpose of the research, literature survey on existing literature, thesis, research report is performed and also reliability analysis, validity test and multiple regression analysis using SPSSWIN 18.0 is used in this research. To verify a research model and hypothesis, a questionnaire survey among employees of shipping companies and shipping agencies was executed. 76 copies of total 200 copies of questionnaires were collected and the number of questionnaire used for empirical analysis was 76 copies. The main results of the study are summarized as below. First, Hypothesis 1 "shipping service firm's perceived relational benefits has a positive impact on the switching barrier" was supported by this study. Second, Hypothesis 2 "shipping service firm's perceived relational benefits has a positive impact on the loyalty" was supported in this research. Finally, Hypothesis 3 "switching barrier has a positive impact on the customer's loyalty" was also supported. Further research can be extended by adding more questionnaires including more shipping service firms all over the nation.

• Journal of Fisheries and Marine Sciences Education
• /
• v.14 no.2
• /
• pp.149-160
• /
• 2002

I have been analyzed the marine accidents during 10years(1992~2001) based on the maritime inquire court decision, the results were as follows: 1. The rate of accident occuring were showed fishing boat(69.9%), freighter(12.3%), tanker(4.3%), tug boat(3.8%), passenger boat(2.1%) by the usage. 2. The marine accident had been showed operational fault(67.3%), mishandling of engine equipment(21.7%), meteorological condition, etc(11%) by the reason, most accidents had been occured by the operator fault and rack of experience. 3. The marine accidents had been showed damage of hull and engine(27.5%), collision(24%), foundering(11.3%), fire(3.9%), agrounding(10%), by the kind of accidents. 4. The accidents had been occured (74.6%) at the coastal sea, harbour and (25.4%) at the open sea by the sectors. The accidents of the vessel less than 500ton were much increased (54.3%) also, The accidents were much occured at the time between 0400~0800 hours by the time.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.4
• /
• pp.318-323
• /
• 2014

When a disabled ship is being towed in a seaway, the speed and direction of the towed ship are estimated by using the towing force and direction of the selected tug boats at the predicted sea conditions including the wind and currents. In this paper, prediction method at the towing conditions of the various towing operations for a disabled ship are studied. The proposed calculation method suggests firstly the method to import the speed and resistance of the forward direction of the towed ship calculated by the existing computer program, second, the method to calculate the speed and resistance of the towed direction of the towed ship acquired from the selected tug boats at the initial towing conditions and lastly, the method to calculate the speed and resistance of the towed direction for the towed ship at the stable towing conditions. These calculation methods have been applied to the computer program and this program has been approved to be a useful program, capable of appropriately predicting the towed ship's conditions.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.303-308
• /
• 2006

In this paper, the authors calculated manoeuvring motions of a large container vessel approaching to the newly built container piers to get alongside to her berth in Busan harbour. The motion calculations were done by using fixed coordinate system and the object of the calculations is to check the manoeuvring motions are safe or not for berthing the large vessel to her berth. The result of calculations manifested that a large container vessel can get alongside to the piers without any difficulty under normal weather conditions by using 2 Z. Peller tug boats of 4500 H.P. each and also these demonstrated it is difficult to conduct and get her alongside to the piers under rough weather conditions of wind force 16.9m/sec or more. Under rough weather conditions of 6 by beaufort scale the average wind velocity is about 13.5m and if we add 25% increase of the normal velocity to it, the wind will becomes a gust of 16.9m/sec. So it is advisable to avoid conducting a large container vessel to the pier under the rough weather conditions of 6 or more by beaufort scale. Also, I is better to use 3 Z. peller tug boats of 4500 HP. each under the above mentioned rough weather in a case of unavoidable circumstances.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.04a
• /
• pp.33-43
• /
• 2000

In order to streamline the procedure of data transmission in port and logistics industries, MOMAF introduced EDI systems as the method of data transmission of 19 documents 5 years ago. While operating EDI system, MOMAF has found the inconvenience and the inefficiency of using EDI systems in the field of requesting fast response. This thesis focuses on finding the possible fields of on-line processing system instead of EDI system and suggests the economic effects occurred by the on-line processing system. The result of the paper presents that if data transmission area such as 'ocean vessel entrance report', 'application for using tug boat'and 'application for pilot'is changed to on-line processing method, the processing cost and time will be reduced compared with EDI processing method.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.2 s.29
• /
• pp.147-153
• /
• 2007

In this paper, the authors calculated maneuvering motions of a large container vessel approaching to the newly built container piers to get alongside to her berth in Busan harbour. The motion calculations were done by using fixed coordinate system and the object of the calculations is to check the maneuvering motions are safe or not for berthing the large vessel to her berth. The result of calculations manifested that a large container vessel can get alongside to the piers without any difficulty under normal weather conditions by using 2 Z. Peller tug boats of 4500 H.P. each and also these demonstrated it is difficult to conduct and get her alongside to the piers under rough weather conditions of wind force 16.9m/sec or more. Under rough weather conditions of 6 by Beaufort scale the average wind velocity is about 13.5m and if we add 25% increase of the normal velocity to it, the wind will becomes a gust of 16.9m/sec. So it is advisable to avoid conducting a large container vessel to the pier under the rough weather conditions of 6 or more by Beaufort scale. Also, it is better to use 3 Z. peller tug boats of 4500 H.P. each under the above mentioned rough weather in a case of unavoidable circumstances.

• Journal of Navigation and Port Research
• /
• v.38 no.5
• /
• pp.471-477
• /
• 2014

In general, a regular charterparty form is used as a charterparty for tugboats which are employed in marine construction and a bareboat charter form is generally used for barge boat charterparty. As the tug-barge charterparty which are currently used do not have a standardised form, contracting parties arbitrarily decide on the terms and conditions of the contract. As a result, provisions of the charterparty usually do not specify in the contract which party bears the burden of liability in case of accident. Furthermore, the terminologies used in the charterparty are different from legal terms of current commercial law which causes confusion. These problems can be solved mostly by clarifying the legal character of the charterparty between the contracting parties and by conforming the terminologies. In addition, endeavour to standardise the contract form must be carried forward at the same time. This research purports to study actual condition of current charterparty for tug-barge ship which are employed to marine construction and to suggest systematic improvement plan. For this purpose, this research focuses on studying cases in which dispute arose due to lack of clarity in the provisions of the contract with regard to which party bears the burden of liability in case of accident. This research also purports to suggest forming the standardised contract terms of the charterparty as one way of solution and examine matters to be attended in writing a standardised form.

• Ocean Systems Engineering
• /
• v.4 no.2
• /
• pp.99-115
• /
• 2014

When caissons are mounted on a floating transportation barge and towed by a tug boat in waves, motion of the floating dock creates inertia and gravity-induced slip forces on the caisson. If its magnitude exceeds the corresponding friction force between the two surfaces, a slip may occur, which can lead to an unwanted accident. In oblique waves, both pitch and roll motions occur simultaneously and their coupling effects for slip and friction forces become more complicated. With the presence of strong winds, the slip force can appreciably be increased to make the situation worse. In this regard, the safety of the transportation process of a caisson mounted on a floating dock for various wind-wave conditions is investigated. The analysis is done by both frequency-domain approach and time-domain approach, and their differences as well as pros and cons are discussed. It is seen that the time-domain approach is more direct and accurate and can include nonlinear contributions as well as viscous effects, which are typically neglected in the linear frequency-domain approach.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.104-108
• /
• 2009

As the demands of ocean resource development increase, many offshore structures are required. To cope with the active ocean developments, many types of construction methods have been applied for offshore facilities, including oil, gas and harbors. One of the challenges is to transport and install the heave bridge caisson. Several construction methods are well understood. However, for the sake of safety and reliability, the F/D installation method can be utilized. While the caisson is carried by an F/D, the mooring force of the tug boat and the structure stability from exiting motions in the dock should be checked against external loadings and sea conditions. The external loads can be classified with wind force, current force, and wave force. In the stability analysis, transportation velocity and draft of F/D are important factors. The dynamic stability and hook load for crane barge installation for the same caisson are also studied. Considering external loads and dominant factors, the stability of caisson during transportation has been investigated.

• Journal of Drive and Control
• /
• v.11 no.3
• /
• pp.7-13
• /
• 2014

Everyday about 90% of cargos are delivered by ships, and thousands of vessels enter and depart the international container harbors such as Shanghai, Singapore, Hong Kong, Busan, Rotterdam, etc. Maneuvering at harbor is known as the most sophisticated and difficult procedure, because the effectiveness of actuators during low speed berthing is reduced. In this paper, a new berthing method is discussed. Tugboats are combined with damper systems to ensure safe berthing. A mathematical model describing the interaction between unactuated ship, tugboats and damper systems is presented. An optimal controller is designed to maneuver the ship without oscillation and overshoot. MCL (Marine Cybernetics Lab) model ship is used to evaluate the efficiency of the proposed approach through MatLab simulation.