• Journal of Korean Port Research
• /
• v.2 no.1
• /
• pp.75-106
• /
• 1988

As port transport system consists of subsystems such as navigation system, cargo handling system, storage system, inland transport system, and Management and Information system, the productivity of this system is determined by the minimum level of subsystem. From the viewpoint of elaborating the efficiency of integrated system, it is valuable to determine the optimal level of harbour tug boat which is the most important factor of navigation system. This paper treats the optimal amount of harbour tug boat by simulation, and applied to Pusan port. In the course of simulation, an emperical formula is introduced for determining the Horse Power (HP) of tug boat by the ship's gross tonnage (G/T) refering to the cases of various ports of other countries, that is ; $Y=9.96X^{0.6}+569$. X : The gross tonnage of vessel (G/T). Y : The Horse Power (HP) of tug boat. The results of the simulation are summarized as follows ; 1) In 1987, three or four low-powered harbour tug boats, five mid-powered harbour tug boats and four high-powered harbour tug boats are necessary in the mean level. But, five or seven low-powered harbour tug boats, ten mid-powered harbour tug boats and eight high-powered harbour tug boats are necessary lest delay should occur at all. 2) In 1992, 1lee or four low-powered harbour tug boats, six mid-powered harbour tug boats and seven high-powered harbour tug boats are estimated and be necessary in the mean level.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.437-443
• /
• 2019

Aid to navigation is a navigational aid facility that informs a sailing vessel of its location and direction as well as a location of a specific obstacle by means of a light, shape, color, sound, radio wave, etc. It can be valuable in improving the safety of day and night vessel navigation at sea. For the safety of the tug boat, the minimum equipment requirements for each type of tug boat are arranged. Despite these preparations, the collision accidents between tug boats, barges, and light buoys can occur when the tug boat turns due to the length of the tow-line, tidal current, and the barge's momentum etc. The purpose of this study was to propose the basic system that analyzes the physical relationship between two vessels regarding the tug boat-barge-light buoy dynamics and propagate the corresponding data through the aid to navigation management & operation systems in use at each regional oceans and fisheries.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.12-23
• /
• 2021

In the conventional experiment to assess the towing operations, the towing stability of the towed vessel has been evaluated under the condition without lateral motion of the tug-boat. However, the tug-boats may have a lateral force to change the direction of the towed vessel. In this study, experiments have been conducted considering unsteady conditions in the towing system. First, a towing test system in a Circular Water Channel (CWC) using the conventional experimental method is built. Second, the towing characteristics of the towed vessel are investigated using the conventional method, and they are compared with other research results and stability discriminant criteria. Third, the lateral motion of the tug-boat was modeled as a sinusoidal motion using a forced oscillation device changing frequency and amplitude. Finally, the discussion is given in terms of both towing- and course-stability of the towed vessel according to the lateral motion of the tug-boat.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.65-70
• /
• 2009

In case that tug boat pushes side structures of other large vessels to maneuver, it is required that contacted side structures of the maneuvered vessels have enough structural safety against tug push loads. The objective of this study is to evaluate the structural effect of carling which is installed between side longitudinal stiffeners. A comparative study of side structures with carling and without carling is performed to evaluate the effect of carling member by both FE analysis. According to the result, it is found that the carlings play effective role in the strength of side plates and side longitudinal stiffeners against tug push loads.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.1
• /
• pp.57-62
• /
• 2009

In order to investigate the hydrodynamic interaction between the tug-barge and bank or ship which is crossing to the opposite direction, the towing simulations of tug-barge transportation were performed. Heading of barge, yaw moment and lateral force of tug boat were obtained by this simulation. The characteristics of results were analyzed and the safety towing method for tug-barge operation was proposed. In order to reduce the slewing motion of barge for safe towing operation, the speed of tug boat should be kept slow ahead state with shortened towing line as length of barge within the limits of the possible.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.303-307
• /
• 2008

The tug boat is restricted in her maneuvering ability due to the towed barge, and tug-barge has been strongly affected by the external forces, i.e. the wind, wave, currents, and so on. Therefore, it is difficult to get the safety of tug-barge operation. It is necessary for the captain of tug boat, VTS and operation department to develope the system which can keep observing the course, speed and position of the towed barge in actual sea and prevent the marine accidents in advance. In this study, we proposed the basic method to develope the safety towing system for barge using portable GPS which was easily movable and relatively inexpensive. Then we conducted the test on the real barge. As a result, we could obtain diverse navigation data to make a safety towing work. It was noted that these data could be used for carious purposes.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.40-41
• /
• 2009

In general, ships are towed to keep the safe operations in harbor or channel by tug boats. Due to increase in ocean traffic, many accidents are happened in harbor or channel in these days. Therefore it is necessary to predict manoeuvrability of tug-barge system, and to assure the safety of that system. Turg-barge system is composed of tug boat, barge, and towing cable, connecting both ships. Manoeuvring equations of tug-barge system are suggested, and the scopes of model tests are discussed to establish the mathematical models for tug boats in this paper.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.43-47
• /
• 2008

In order to investigate the hydrodynamic interaction between the tug-barge and bank or ship which is crossing to the opposite direction, we have executed the towing simulation of tug-barge transportation. Heading of barge, yaw moment and lateral force of tug boat are obtained by this simulation. We have analyzed the characteristics of results and propose the safety towing method for tug-barge operation.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.221-222
• /
• 2006

안벽 시운전시 Tug Boat의 지원 없이도 프로펠러의 추력을 감당할 수 있는 Mooring Line의 양을 정하기 위해 선형별 프로펠러의 추력을 추정 계산함.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.55-59
• /
• 2008

The tug boat is restricted in her maneuvering ability due to the towed barge, and tug-barge have been strongly affected by the external forces, i.e. the wind, wave, currents, and so on. Therefore it is difficult to get the safety if tug-barge operation. In this study, we propose the basic method to develope the safety towing system for barge using portable GPS which is easily movable and relatively inexpensive. Then we have conducted the test on the real barge and discuss the results.