• Tuberculosis and Respiratory Diseases
• /
• v.48 no.1
• /
• pp.91-95
• /
• 2000

Mucous gland adenoma of the bronchus is a rare benign tumor arising from the bronchial mucous gland. It accounts for less than 0.5% of all lung tumors. In adults, tracheal tumors are most often malignant. Among benign tumors arising in the trachea, mucous gland adenoma of the trachea is extremely rare. First case was reported by Ferguson and Cleeland in 1988, as "Mucous gland adenoma of the trachea". Microscopic study shows it to arise from normal submucosal mucous glands forming glandular or tubular structures composed of mucous secreting cells. Common symptoms were cough, hemoptysis, recurrent and protracted pneumonia, shortness of breath, and wheeze. Duration of symptoms before diagnosis varied from a few weeks to 10 years with prolonged symptoms being usual. Management of these tumors should be complete excision, including pulmonary resection because two instances of recurrence after local excision have been reported.

• Steel and Composite Structures
• /
• v.20 no.2
• /
• pp.379-397
• /
• 2016

Due to creep and shrinkage of the concrete core, concrete-filled steel tubular (CFST) arches continue to deform in the long-term under sustained loads. This paper presents analytical investigations of the effects of geometric nonlinearity on the long-term in-plane structural performance and stability of three-pinned CFST circular arches under a sustained uniform radial load. Non-linear long-term analysis is conducted and compared with its linear counterpart. It is found that the linear analysis predicts long-term increases of deformations of the CFST arches, but does not predict any long-term changes of the internal actions. However, non-linear analysis predicts not only more significant long-term increases of deformations, but also significant long-term increases of internal actions under the same sustained load. As a result, a three-pinned CFST arch satisfying the serviceability limit state predicted by the linear analysis may violate the serviceability requirement when its geometric nonlinearity is considered. It is also shown that the geometric nonlinearity greatly reduces the long-term in-plane stability of three-pinned CFST arches under the sustained load. A three-pinned CFST arch satisfying the stability limit state predicted by linear analysis in the long-term may lose its stability because of its geometric nonlinearity. Hence, non-linear analysis is needed for correctly predicting the long-term structural behaviour and stability of three-pinned CFST arches under the sustained load. The non-linear long-term behaviour and stability of three-pinned CFST arches are compared with those of two-pinned counterparts. The linear and non-linear analyses for the long-term behaviour and stability are validated by the finite element method.

• Applied Microscopy
• /
• v.34 no.2
• /
• pp.83-93
• /
• 2004

Integumentary structures of the rockfish, Sebastiscus tertius were examined by means of the light and transmission electron microscopy. Stratified epidermal layer consists of supporting cells, unicellular glands, granular cells and mitochondria-rich cells. The epidermal layer could be classified into superficial, intermediate and basal layer by morphology and structure of the supporting cells. Mucous cells of unicellular gland were observed in the superficial and intermediate layer of the epidermis. The mucous materials were identified as acidic and carboxylated mucosubstance by histochemical methods. Club cell has well-developed central vacuole, rough endoplasmic reticula and Golgi complex in the cytoplasm. Granular cells were observed in the superficial layer and contained numerous granules of high electron density. Mitochondria-rich cells are characterized by well-developed microfilaments in cortex and numerous tubular mitochondria in medullar cytoplasm. Three types of pigment cells in the dermal layer could be distinguished with electron density of cytoplasmic inclusions.

• Computers and Concrete
• /
• v.26 no.6
• /
• pp.467-482
• /
• 2020

This research focused on analyzing the post-fire behavior of high-performance concrete-filled steel tube (CFST) columns, with the concrete containing tire rubber and steel fibers, under axial compressive loading. The finite element (FE) modeling of such heated columns containing recycled aggregate is a branch of this field which has not received the proper attention of researchers. Better understanding the post-fire behavior of these columns by measuring their residual strength and deformation is critical for achieving the minimum repair level required for structures damaged in the fire. Therefore, to develop this model, 19 groups of confined and unconfined specimens with the variables including the volume ratio of steel fibers, tire rubber content, diameter-to-thickness (D/t) ratio of the steel tube, and exposure temperature were considered. The ABAQUS software was employed to model the tested specimens so that the accurate behavior of the FE-modeled specimens could be examined under test conditions. To achieve desirable results for the modeling of the specimens, in addition to the novel procedure described in this research, the modified versions of models presented by previous researchers were also utilized. After the completion of modeling, the load-axial strain and load-lateral strain relationships, ultimate strength, and failure mode of the modeled CFST specimens were evaluated against the test data, through which the satisfactory accuracy of this modeling procedure was established. Afterward, using a parametric study, the effect of factors such as the concrete core strength at different temperatures and the D/t ratio on the behavior of the CFST columns was explored. Finally, the compressive strength values obtained from the FE model were compared with the corresponding values predicted by various codes, the results of which indicated that most codes were conservative in terms of these predictions.

• Steel and Composite Structures
• /
• v.44 no.3
• /
• pp.309-324
• /
• 2022

The post-fire elastic stiffness and performance of concrete-filled steel tube (CFST) columns containing recycled aggregate concrete (RAC) has rarely been addressed, particularly in terms of material properties. This study was conducted with the aim of assessing the modulus of elasticity of recycled aggregate concrete-filled steel tube (RACFST) stub columns following thermal loading. The test data were employed to model and assess the elastic modulus of circular RACFST stub columns subjected to axial loading after exposure to elevated temperatures. The length/diameter ratio of the specimens was less than three to prevent the sensitivity of overall buckling for the stub columns. The gene expression programming (GEP) method was employed for the model development. The GEP model was derived based on a comprehensive experimental database of heated and non-heated RACFST stub columns that have been properly gathered from the open literature. In this study, by using specifications of 149 specimens, the variables were the steel section ratio, applied temperature, yielding strength of steel, compressive strength of plain concrete, and elastic modulus of steel tube and concrete core (RAC). Moreover, parametric and sensitivity analyses were also performed to determine the contribution of different effective parameters to the post-fire elastic modulus. Additionally, comparisons and verification of the effectiveness of the proposed model were made between the values obtained from the GEP model and the formulas proposed by different researchers. Through the analyses and comparisons of the developed model against formulas available in the literature, the acceptable accuracy of the model for predicting the post-fire modulus of elasticity of circular RACFST stub columns was seen.

• Steel and Composite Structures
• /
• v.49 no.2
• /
• pp.143-159
• /
• 2023

Recently, the design of scaffolding systems has garnered considerable attention due to the increasing number of scaffold collapses. These incidents arise from the underestimation of imposed loads and the site-specific conditions that restrict the application of lateral restraints in scaffold assemblies. The present study is committed to augmenting the buckling resistance of vertical support members, obviating the need for supplementary lateral restraints. To achieve this objective, experimental and computational analyses were performed to assess the axial load buckling capacity of steel props, composed of two hollow steel pipes that slide into each other for a certain length. Three full-scale steel props with various geometric properties were tested to construct and validate the analytical models. The total unsupported length of the steel props is 6 m, while three pins were installed to tighten the outer and inner pipes in the distance they overlapped. Finite Element (FE) modeling is carried out for the three steel props, and the developed models were verified using the experimental results. Also, theoretical analysis is utilized to verify the FE analysis. Using the FE-verified models, a parametric study is conducted to evaluate the effect of different inserted pipe lengths on the steel props' axial load capacity and lateral displacement. Based on the results, the typical failure mode for the studied steel props is global elastic buckling. Also, the prop's elastic buckling strength is sensitive to the inserted length of the smaller pipe. A threshold of minimum inserted length is one-third of the total length, after which the buckling strength increases. The present study offers a prop with enhanced buckling resistance and introduces an equation for calculating an equivalent effective length factor (k), which can be seamlessly incorporated into Euler's buckling equation, thereby facilitating the determination of the buckling capacity of the enhanced props and providing a pragmatic engineering solution.

• Composites Research
• /
• v.37 no.2
• /
• pp.132-138
• /
• 2024

In this study, a molecular dynamics simulation study was performed to investigate the size-dependent electroelastic properties of single-walled boron nitride nanotubes(BNNT). To describe the elasticity and polarization of BNNT under mechanical loading, the Tersoff potential model and rigid ion approximation were adopted. For the prediction of piezoelectric constants and Young's modulus of BNNTs, piezoelectric constitutive equations based on the Maxwell's equation were used to calculate the strain-electric displacement and strain-stress relationships. It was found that the piezoelectric constants of BNNTs gradually decreases as the radius of the tubes increases showing a nonnegligible size effect. On the other hand, the elastic constants of the BNNTs showed opposites trends according to the equivalent geometrical assumption of the tubular structures. To establish the structure-property relationships, localized configurational change of the primarily bonded B-N bonded topology was investigated in detail to elucidate the BNNT curvature dependent elasticity.

• Korean Journal of Veterinary Research
• /
• v.30 no.1
• /
• pp.1-8
• /
• 1990

The present study was focussed mainly on the morphological changes of the glandular tubules in the large intestine according to age of piglets. Samples were taken from large intesine of 1-, 10-, 20-, 35- and 45-day-old piglets, 2 to 3 piglets in each age group. The intestinal samples were fixed in 10% neutral formalin solution, dehydrated, and then paraffin sections were stained with H-E. The results observed were summarized as follows: 1. The mucosal glands in the cecum and colon tend to be unbranched simple straight tubular glands, or often two or more branched simple stright tubular glands. 2. The number of the longitudinal folds and the number of the crypts per cross section of piglet colons, respectively, were 1-day-old piglets-$3.8{\pm}0.8$, $92.1{\pm}6.9$; 10-day-old piglets-$7.1{\pm}1.1$, $164.2{\pm}10.3$; 20-day-old piglets-$15.2{\pm}0.8$, $178.5{\pm}6.8$; 35-day-old piglets-$19.3{\pm}3.0$, $454.9{\pm}25.3$; 45-day-old piglets-$20.6{\pm}3.1$, $524.6{\pm}37.2$, and the regression equation between age and these two number were $\hat{Y}=0.40X+4.32$ and $\hat{Y}=10.4X+51.52$, respectively. 3. The length and cell number per single side wall of a glandular tubule in the colon section were 1-day-old piglets-$196.3{\pm}7.1{\mu}m$, $40.0{\pm}3.3$; 10-day-old piglets-$236.0{\pm}34.5{\mu}m$, $47.9{\pm}5.3$; 20-day-old piglets-$262.8{\pm}39.6{\mu}m$, $54.3{\pm}9.0$; 35-day-old piglets-$291.75{\pm}48.3{\mu}m$, $56.9{\pm}4.9$; 45-day-old piglets-$364.8{\pm}61.5{\mu}m$, $67.7{\pm}7.4$, respectively, and the regression equation between age and these two data were $\hat{Y}=3.45X+193.8$ and $\hat{Y}=0.56X+41.0$, respectively. 4. The overall percentages of the cell number and length of glandular tubules in piglet colons were the pit and isthmus-$75.3{\pm}11.1%$, $78.8{\pm}12.3%$; gland-$24.7{\pm}5.4%$, $21.2{\pm}5.3%$, respectively. 5. The length and cell number of single side wall of glandular tubules in cecal sections were 1-day-old piglets-$190.3{\pm}31.1{\mu}m$, $37.6{\pm}4.8$; 10-day-old piglets-$235.6{\pm}25.3{\mu}m$, $46.2{\pm}3.6$; 20-day-old piglets-$295.3{\pm}45.6{\mu}m$, $52.0{\pm}6.2$; 35-day-old piglets-$351.3{\pm}28.3{\mu}m$, $60.4{\pm}8.5$; 45-day-old piglets-$366.3{\pm}48.5{\mu}m$, $64.7{\pm}8.2$, respectively, and the regression equation between age and these two data were $\hat{Y}=4.11X+196.6$ and $\hat{Y}=0.60X+38.9$, respectively.

• Journal of Sericultural and Entomological Science
• /
• v.25 no.2
• /
• pp.1-31
• /
• 1984

Flacherie, as one of the most prevalent silkworm diseases, causes severe economic damage to sericultural industry and its pathogens have been proved to be flacherie virus (FV) and densonucleosis virus (DNV). Multiplications of the viruses in the larvae of the silkworm, Bombyx mori, were studied by the sucrose density gradient centrifugation and electron microscopy. The quantitative and qualitative changes of nucleic acids and proteins were investigated from the midgut and hemolymph in the silkworm larvae infected separately with FV and DNV. The histopathological changes of epithelial cells of infected midgut also were examined by an electron microscope. 1. Purified fractions of FV or DNV in a sucrose density gradient centrifugation yielded one homogenous and sharp peak without a shoulder, suggesting no heterogenous materials in the preparation. Electron microscopy also revealed that FV and DNV were spherical particles, 27nm and 21nm in diameter, respectively. 2. Silkworm larvae showed a decrease in body weight on the 6th day and in midgut weight on the 3rd day after inoculation with FV or DNV. 3. DNA content was higher in the midgut when infected with FV or DNV, but the hemolymph of the infected larvae showed no difference during first 6 days after inoculation, after which DNA concentration declined rapidly. 4. RNA synthesis of silkworm larvae infected separately with FV and DNV was stimulated in the midgut, but RNA content was reduced in the hemolymph at the early stage of virus multiplication. At the late stage of virus multiplication, however, it was extremely reduced in both midgut and hemolymph. 5. The concentration of protein in the midgut and hemolymph of silkworm larvae infected separately with FV and DNV showed no difference from that of the healthy larvae at the early stage of virus multiplication, but it was significantly reduced at the late stage of virus multiplication. 6. There was no difference in the electrophoretic patterns of RNAs extracted from the midgut of healthy or virus-infected larvae. 7. The electrophoresis of proteins extracted from the midgut infected with FV or DNV, when carried out on the 1st and 5th day after virus inoculation, showed no difference from that of the healthy larvae. But, there was an additional band with medium motility in the proteins on the 8th day after virus inoculation, while a band with low mobility shown in the proteins of healthy larvae disappeared in the infected larvae. However, a band with high mobility in the healthy larvae was separated into two fractions in the infected larvae. 8. The electrophoretic pattern of hemolymph proteins of the silkworm larvae infected separately with FV and DNV was similar to that of the healthy larvae, but the concentration of hemolymph proteins in the infected larvae was lower than that of the healthy larvae at the late stage. 9. Two types of inclusion bodies were shown by the double staining of pyronin-methyl green in the columnar cell of the midgut on the 8th day after FV inoculation. 10. Electron microscopy of the infected midgut revealed that the 'cytoplasmic wall' of the goblet cell thickened on the 5th day after FV inoculation and several types of the cytopathogenic structures, such as virus$.$specific vesicles, virus particles, linear structures, tubular structures, and high electron-dense matrices were observed in the cytoplasm of the goblet cell. The virus particles were also observed in the microvilli and the structures similar to spherical virus particles were observed around the virus-specific vesicles, suggesting the virus assembly in the cytoplasm. 11. Fluorescence micrograph of the infected midgut stained with acridine orange showed that the nucleus, the site of DNV multiplication in the columnar cell, enlarged on the 5th day after virus inoculation. 12. Electron microscopic examination of DNV infected midgut revealed that the nucleolus of the columnar cell was broken into granules and those granules dispersed into apical region of the nucleus on the 5th day after virus inoculation. On the 8th day after inoculation, it was also observed that the nucleus of the columnar cell was full with the high electron-dense virogenic stroma which were similar to virus particles. These facts suggest that the virogenic stroma were the sites of virus assembly in the process of DNV multiplication.

• Journal of Embryo Transfer
• /
• v.25 no.1
• /
• pp.77-84
• /
• 2010

This study was carried out the normal serial ultrasonographic appearance of the postpartum uterine involution with small pet bitches. Postpartum changes in uterine shape, architecture, echogenicity and diameter were monitored with ultrasonography in small pet bitches (Miniature Schnauzer, Cocker Spaniel and Shih-tzu). In the Miniature Schnauzer bitches, uterine diameter of the placental sites and interplacental sites were decreased from $24.31{\pm}1.65\;mm$ at 1 day to $13.56{\pm}0.76\;mm$at 7 day, and $15.19{\pm}1.28\;mm$ at 1 day to $10.41{\pm}0.76\;mm$ at 7 day postpartum. In the Cocker Spaniel, the placental sites and interplacental sites were decreased from $24.90{\pm}1.62\;mm$ at 1 day to $14.14{\pm}1.21\;mm$at 7 day, and $15.33{\pm}1.47\;mm$ at 1 day to $10.19{\pm}0.83\;mm$ at 7 day postpartum. In the Shih-tzu, the placental sites and interplacental sites were decreased from $23.96{\pm}1.55\;mm$at 1 day to $13.84{\pm}0.94\;mm$ at 7 day, and $14.93{\pm}1.29\;mm$ at 1 day to $9.98{\pm}0.84\;mm$ at 7 day postpartum. And uterine diameter was no statistically significant difference among bitches (p>0.05). At 67 days, the uterine diameter in Miniature Schnauzer bitches were 6~7 mm both placental and interplacental sites, and the uterine horns showed uniform hypoechoic, tubular structures without enlargement. In present study, the involution of the uterus was completed at 67 days after parturition in Miniature Schnauzer, and 65 days in Cocker Spaniel and the Shih-tzu. There were no significant differences of normal postpartum uterine involution between small pet bitches (p>0.05). In conclusion, the postpartum involution of small pet bitches appeared to be completed normally at 65~67 days after parturition and could be identified by gross findings such as vaginal discharges and ultrasonographic findings of uterine shape and echogenicity.