• 제목/요약/키워드: Tube-furnace

검색결과 206건 처리시간 0.028초

TDLAS에서 temperature binning 방법을 이용한 온도 측정에 대한 실험적 연구 (Experimental study on TDLAS temperature profile measurement using temperature binning method)

  • 윤성운;김세원;신명철;이창엽
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.27-28
    • /
    • 2012
  • Tunable diode laser absorption spectroscopy(TDLAS) measurement techniques for several gases densities and temperatures have been applied in industrial combustion systems. Accurate measurement of temperature profile is very important, especially in power plants and heating furnaces. So profile fitting and temperature binning methods are new issue for accurate measurement of temperature in laser gas sensing. Temperature binning method is applied in this study for the measurement of temperature profile using tube furnace with three temperature zones. In this study the temperature profiles of tube furnace is accurately measured within 5% error, and this technique is proved to be very promising in the field of temperature profile measurement.

  • PDF

미연분 및 NOx배출 특성에 대한 고회분탄의 영향 연구 (Effect of High Ash Coal on Unburned Carbon and NOx Emission)

  • 김상인;이병화;임호;안기주;김만철;송주헌;전충환
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.341-342
    • /
    • 2012
  • The effect of high ash coal which has relatively high ash content and low combustibility on unburned carbon and NOx emission was experimentally investigated at several excess air ratio and particle size conditions of four coals containing different ash content in a drop tube furnace. Flue gas was measured by Gas analyzer in order to figure out unburned carbon characteristics. The results show that the higher content of ash makes the higher unburned carbon rate, subsequent changes in NOx emission characteristics was investigated.

  • PDF

미분탄 입자의 고속가열 열분해거동 해석 (Pyrolysis Behavior of Pulverized Coal Particles at High Heating Rate)

  • 장지훈;한가람;유근실;임현수;이욱륜;박호영
    • 한국수소및신에너지학회논문집
    • /
    • 제30권3호
    • /
    • pp.260-268
    • /
    • 2019
  • The pyrolysis characteristics of pulverized coal particle was numerically analyzed with the drop tube furnace. Based on the simulated gas flow field in the drop tube furnace, the particle velocity, temperature and volatile evolution were calculated with the fourth order Runge-Kutta method. The effects of changes in reactor wall temperature and particle diameter on the pyrolysis behavior of coal particle were investigated. The particle heating rate was very sensitive to the reactor wall temperature and particle size, that is, the higher wall temperature and the smaller particle size resulted in the higher heating rate and the consequent quicker volatile evolution.

진공관형 태양열 집열기의 구리-유리 직접 접합 기술 (Technique of Direct Copper to Glass Seal in an Evacuated Tube Solar Collector)

  • 김철영;임형봉;조남권;곽희열
    • 한국세라믹학회지
    • /
    • 제43권9호
    • /
    • pp.544-551
    • /
    • 2006
  • The sealing technique between a glass tube and a copper heat pipe in an evacuated tube solar collector is studied. In this study two different sealing techniques, such as flame method and furnace firing, are examined. After the sealing of a copper to a glass, the oxidation state of the copper and its bonding morphology were examined by SEM and XRD. Its oxidation was retarded by coating of borate solution on the copper, and $Cu_2O(cuprite)$ turned into CuO(tenorite) with increase in a firing temperature and firing time. Porous structure was found in the oxide layer when CuO formed. The best sealing morphology was observed when the thickness of the oxidation layer was less than $20{\mu}m$. The sealing technique performed in a furnace was promising and the satisfactory result was obtained when the sample was fired at $950^{\circ}C$ for 5 min under $N_2$ atmosphere. Annealing procedure is recommended to remove the stress left at the bonding zone.

고회분탄의 촤 산화 반응 특성 연구 (Char Oxidation Characteristics of High Ash Coal in Drop Tube Furnace)

  • 안기주;이병화;김상인;김만철;김승모;전충환
    • 대한기계학회논문집B
    • /
    • 제37권4호
    • /
    • pp.405-413
    • /
    • 2013
  • 4 가지 탄종(Gunvor, Glencore, Noble, ECM)의 촤 산화반응 특성을 $900^{\circ}C$에서 $1300^{\circ}C$까지의 노내온도와 대기압 조건에서 DTF(drop tube furnace)를 이용하여 실험하였다. 촤 반응률은 FT-IR 장비로 측정한 CO, $CO_2$ 농도와 이색온도계로 측정한 입자온도를 통해 계산되었고 고회분탄의 활성화에너지(E)와 pre-exponential 상수(A)는 아레니우스 방정식을 기초로 계산되었다. 실험 결과는 석탄의 회분 함량이 늘어남에 따라, 입자온도와 면적반응성이 감소하였다. 이러한 결과는 회분의 큰 열용량, 회분의 기화잠열과 상대적으로 적은 고정탄소의 함량으로 인한 연소성 저하로 사료된다. 결과적으로 고회분탄은 높은 활성화 에너지(E)를 가진다.

DTF를 이용한 초청정 석탄 촤 산화 반응률 특성 연구 (Char Oxidation Characteristics of Ashless Coal in Drop Tube Furnace)

  • 김상인;이병화;임호;유다연;이시훈;전충환
    • 대한기계학회논문집B
    • /
    • 제36권7호
    • /
    • pp.675-681
    • /
    • 2012
  • 본 연구는 낮은 회 성분의 함량과 높은 발열량의 특성을 지닌 초청정 석탄의 촤 반응율 특성을 알아보았다. 실험은 DTF(Drop Tube Furnace)를 통해서 다양한 온도조건 하에 산소의 분율을 바꾸어가며 수행하였다. 촤 반응률을 도출하기 위하여 FT-IR을 통해 배기가스(CO, $CO_2$)를 측정하였으며, 이색온도계를 통하여서 입자 온도를 측정하였다. 또한, Arrhenius 경험식을 토대로 초청정 석탄 촤의 활성화 에너지와 빈도인자를 도출하였다. 결과는 초청정 석탄 촤의 반응특성은 온도와 산소 분율이 높아질수록 뚜렷한 증가를 보였고, 초청정 석탄 촤의 활성화 에너지는 역청탄의 수치와 비슷한 값을 보임을 알 수 있었다.

고수분탄의 건조에 따른 미연분 및 NOx 배출 특성에 관한 연구 (Study on the Unburned Carbon and NOx emission of High Moisture Coal)

  • 안석기;김정우;김규보;이시훈;전충환
    • 에너지공학
    • /
    • 제25권4호
    • /
    • pp.53-61
    • /
    • 2016
  • 본 연구에서는 Drop Tube Furnace(DTF)를 이용하여 고수분탄과 건조석탄의 미연분 및 NOx 배출 특성에 관한 실험과 수치해석 연구를 수행하였다. $1200^{\circ}C$ 온도조건에서 동일한 질량의 고수분탄과 건조석탄의 연소 시, 건조석탄의 경우 고수분탄에 비해 노 내 온도가 더 높고 동일 체류시간 반응 후 미연분 함량도 더 많았으며, NOx 배출은 고수분탄에서 더 낮았다. 석탄 내 수분함량이 40%에서 10%로 감소함에 따라 노 내 수분 농도는 감소하고 가스온도는 증가하는 경향을 보였다. 주위 Wall temperature가 $900^{\circ}C{\sim}1500^{\circ}C$까지 높아질수록 미연분은 감소하였으며, NOx 배출은 증가하는 경향을 보였다. 특히 건조석탄의 경우 주위 온도변화에 따른 연소성이 고수분탄보다 크게 나타나, 온도가 증가할수록 고수분탄과 건조석탄의 미연분 차이가 감소하는 것을 확인할 수 있었다.

DTF 를 이용한 석탄 회분 함량에 따른 미연분 및 NOx 배출 특성 연구 (Effect of Ash Content on Unburned Carbon and NOx Emission in a Drop Tube Furnace)

  • 김상인;이병화;안기주;김만철;김승모;전충환
    • 대한기계학회논문집B
    • /
    • 제38권12호
    • /
    • pp.963-969
    • /
    • 2014
  • 본 연구는 고회분탄의 최적화된 연소 조건을 알아보기 위해 회분 함량이 각기 다른 네 종류 석탄의 연소시 배출되는 NOx및 미연분 특성을 알아보았다. 실험은 DTF(Drop Tube Furnace)를 통해서 다양한 입자크기조건 및 공기다단방식을 도입하여 수행하였다. 결과로 회분의 함량이 증가할수록 미연분이 증가하며, 입자크기가 증대될수록 미연분에 대한 회분의 영향이 명확해짐을 확인하였다. 또한, 회분의 함량이 증가할수록 Char-NOx가 감소하며, 입자크기가 감소할수록 NOx의 배출이 감소하는 것을 확인하였다. 본 연구는 고회분탄의 NOx를 저감하는 방법으로 공기다단방식의 적용을 제안하며 전단 연소 영역의 공기과잉률 변화를 통한 최적화된 연소조건을 제시하였다.