• The Plant Pathology Journal
• /
• 제19권4호
• /
• pp.195-199
• /
• 2003

Pink root of onion occurred in the fields of the Onion Experimental Station and in the main onion cultivation area in Korea in 1998 and 1999, respectively. The casual fungus of pink root was isolated only from apricot agar. Formation of pycnidia and pycnidiospores of the fungus was highest in alternating cycles of 12 hours near ultraviolet light and 12 hours in dark condition. Its morphological characteristics and pigment formation on water agar were identical with that of Pyrenochaeta terrestris. The optimum temperature for the growth of the fungus and disease development was $25-28^{\circ}C$. When onion seeds were inoculated with the spore suspension, incubated in test-tube and sown in potted soil, disease symptoms developed in onion roots 7 and 30 days after inoculation.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.39-45
• /
• 1998

Gas springs have been widely used in motor vehicles as well as in most areas of industry. Instead of coil springs, these gas springs are easily opreated to open(extension process) or close (compression process) the doors because $N_2$ gas with high pressure and oil are charged in tube. Most of manufacturers are using the trial ＆ error method in order to decide its specification(reaction force, damping force), which tends to waste time and money. Therefore, gas springs have been improved by properly changing the control pressure of $N_2$ Gas with its mounting location and weight to maximize its effect and to minimize its space. Although it has been researched on damping structure to minimize impact which is applied to vehicle when its back door is fully opened, the characteristics of damping structure are not known clearly. There(ore, this paper will not only clearly define the effect of important factors(open ＆ close force)for gas springs through theoretical analysis but also provide optimum design specification through development of program to avoid traditional method of specification determination such as the trail It error method which is widely used in whole industries including automotive industry.

• Korea-Australia Rheology Journal
• /
• 제13권1호
• /
• pp.29-35
• /
• 2001

The development of filament stretching extensional rheometers over the past decade has enabled the systematic measurement of the transient extensional stress growth in dilute and semi-dilute polymer solutions. The strain-hardening in the extensional viscosity of dilute solutions overwhelms the perturbative effects of capillarity, inertia & gravity and the kinematics of the extensional deformation become increasingly homogeneous at large strains. This permits the development of a robust open-loop control algorithm for rapidly realizing a deformation with constant stretch history that is desired for extensional rheometry. For entangled fluids such as concentrated solutions and melts the situation is less well defined since the material functions are governed by the molecular weight between entanglements, and the fluids therefore show much less pronounced strain-hardening in transient elongation. We use experiments with semi-dilute/entangled and concentrated/entangled monodisperse polystyrene solutions coupled with time-dependent numerical computations using nonlinear viscoelastic constitutive equations such as the Giesekus model in order to show that an open-loop control strategy is still viable for such fluids. Multiple iterations using a successive substitution may be necessary, however, in order to obtain the true transient extensional viscosity material function. At large strains and high extension rates the extension of fluid filaments in both dilute and concentrated polymer solutions is limited by the onset of purely elastic instabilities which result in necking or peeling of the elongating column. The mode of instability is demonstrated to be a sensitive function of the magnitude of the strain-hardening in the fluid sample. In entangled solutions of linear polymers the observed transition from necking instability to peeling instability observed at high strain rates (of order of the reciprocal of the Rouse time for the fluid) is directly connected to the cross-over from a reptative mechanism of tube orientation to one of chain extension.

• 한국가스학회지
• /
• 제7권2호
• /
• pp.22-32
• /
• 2003

Al-황동은 기계적 특성 및 열전도성이 우수하고 해수 중에서 표면 보호피막을 형성하므로 부식저항성이 높아 해수를 냉각수로 사용하는 선박용 열교환기의 세관재로 널리 사용되고 있다 Al-황동 세관은 실제 사용 환경에서 굽힘 등에 의한 소성변형된 상태로 사용되는 경우가 많다. 이와 같은 소성변형에 의한 Al-황동 세관의 균열 파손사례는 선박의 오일탱크 내의 가열코일, 각종 열교환기의 세관 등에서 흔히 찾아 볼 수 있다. 또한 세관의 확관에 의한 밀봉 방법에 따라 세관의 변형에 의한 잔류응력 및 어패류 혼입에 의한 해수 유입부의 국부적인 유속증가 등에 기인하여 Al-황동 세관의 균열 및 침식 등의 파손사례가 보고되고있다. 본 연구에서는 $3.5\%$ NaCl. + $0.1\%\;NH_4OH$ 수용액을 시험편 표면에 5 m/s로 액분사하의 가속실험에서 Al-황동 세관의 응력부식균열 거동에 미치는 응력의 영향에 대하여 고찰하였다.

• 전자공학회논문지A
• /
• 제32A권2호
• /
• pp.31-37
• /
• 1995

A ray-based approach is developed to calculate the scattering from inhomogeneous dielectric objects. This approach is a natural extension of the "shooting and bouncing ray(SBR)" technique developed earlier for calculating the radar cross section of cavity structures and complex targets. In this formulation, a dense grid of rays representing the incident field is shot toward the scatterer. The curved trajectory, amplitude, phase and polarization of the ray fields inside the inhomogeneous object are computed numerically based on the laws of geometrical optics. The contributions of the exting rays to the exterior scattered field are then calculated by using the equivalence principle in conjunction with " a ray-tube integration" scheme. The ray-based approach is applied for the effect of an arcjet plasma plume on satellite reflector performance and backscattering from inhomogeneous objects.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2006년도 춘계학술발표대회
• /
• pp.399-402
• /
• 2006

한국 원자력 연구소는 PEFP(Proton Enginnering Frontier Poject)라고 하는 프로젝트를 수행 중이며, PEFP는 고에너지 양성자 가속기에 대한 프로젝트이다. 양성자 가속기에 대한 제어 시스템은 안정적인 운전 제어를 위해서 장치의 상태를 주기적으로 모니터링 할 뿐만 아니라 장치상태를 저장하여 일정시간 후에 확인이 요구되면 저장된 데이터를 이용하여 이전 정보를 추적할 수 있어야한다. 따라서 양성자 가속기 제어시스템에서는 실시간으로 들어오는 진공 데이터 정보를 저장 및 저장된 데이터를 열람이 가능한 저장 시스템으로 구성하였다. 저장된 데이터들은 RFQ(Radio Frequency Quadrupole) Cryopump, Turbo Pump, Press Gauge, Gate Valve, Compressor와 DTL(Drift Tube Linac) Multi-Gauge, Turbo Pump등의 진공도 및 제어변수 등이 있다. 이들 각각의 진공장치로부터 전달되는 진공 데이터들을 저장하기 위해 EPICS Extension toolset중에서 저장하는 기능을 가진 Channel Archiver를 양성자 가속기 제어 시스템에 추가하였다

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1583-1596
• /
• 2003

A study of forced convection in a circular pipe with a partially filled porous medium was numerically investigated. The Brinkman-Forchheimer extension of the Darcy model was used to analyze the and temperature distribution in the porous medium. Our study includes two types of porous layer configurations: (1) a layer attached at the tube wall extending inward towards the centerline and (2) a layer at the centerline extending outward. The effect of several parameters, such as Darcy number, effective viscosity, effective thermal conductivity, and inertia parameter, as well as the effect of geometric parameters, were investigated.

• Journal of Korean Neurosurgical Society
• /
• 제41권5호
• /
• pp.314-317
• /
• 2007

Ventriculoperitoneal [VP] shunt is a common treatment for hydrocephalic patients. However, complications, such as shunt tube occlusion, infection, intracranial hemorrhage, seizure can occur. Of these, intracranial hemorrhage may occur due to intracranial vascular injury or a rapid decrease of intracranial pressure [ICP]. Most of these hemorrhages are subdural hematomas [SDH] while a few are epidural hematomas [EDH]. It is extremely rare for an intracranial hemorrhage to occur due to an extension of the bleeding from an injured extracranial vessel. We report two cases of EDH due to occipital artery injury following VP shunt and extraventricular drainage [EVD].

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1624-1629
• /
• 2008

The governing equations in generalized curvilinear coordinates for a 3D pulsatile flow are the Incompressible Navier-Stokes (INS) equations with the artificial dissipative terms and continuity equation discretized using a second-order accurate, finite volume method on the nonstaggered computational grid. This method adopts a dual or pseudo time-stepping Artificial Compressibility (AC) method integrated in pseudo-time. The computational technique implements the implicit approximate factorization method of the Beam and Warming method (1978), which is the extension of the Alternate Direction Implicit (ADI) method. The algorithm yields practically identical velocity profiles and secondary flows that are in excellent overall agreement with an experimental measurement (Rindt & Steenhoven, 1991).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.914-919
• /
• 2000

In most case high temperature components in fossil power plant are damaged by fatigue, creep and degradation. Design of power plant components is based on ideal loading such as temperature, pressure and so on. But in many cases unexpected loadings are applied at components. A key ingredient in plant life extension is the preventive diagnosis technology and remaining-life-assessment technology. This paper describes diagnosis technology and life-assessment technology for power plant boiler. It helps in setting up proper inspection schedules, maintenance procedures, and operating procedure.