• Journal of Advanced Marine Engineering and Technology
• /
• v.15 no.5
• /
• pp.47-54
• /
• 1991

The lip seals widely used nowadays in stern tube sealing system of ships have radial sealing contact with shafts or liners, on the other hand the face seals of stern tube sealing system have axial sealing contact with seat. Because of axial sealing contact, the face seals have a large number of merits such as durability of life, simplicity of structure, easy fitting and replacement, etc. In this paper, for the purpose of development of face seals, the fundamental properties of axial sealing contact were analyzed and a trial face seal was designed and manufactured using N.B.R. rubber and Thordon which is widely used for bearing materials. The seal proper of trial face seal was made from N.B.R. rubber and the face insert was made from Thordon, thermosetting resins which are three dimensional, cross linked condensation polylmers. The performance test of trial face seal was carried out on the test bench which was specially designed and manufactured. The results were satisfactory enough to be used in practical stern tube sealing system.

• Journal of Chest Surgery
• /
• v.48 no.5
• /
• pp.378-379
• /
• 2015

Mediastinitis is a life-threatening disease, and effective drainage is needed to treat mediastinitis with abscess formation. We recommend an alternative drainage method using chest tube binding with a Silastic Penrose drainage tube. The use of a Silastic Penrose drainage tube may help to manage mediastinitis with abscess formation. This method facilitates effective draining and prevents tissue adhesion.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.488-493
• /
• 2003

This paper presents new skill in tube-mill processing getting the increase in production efficiency and quality in response to the recent request of high grade pipe. In this study, researchers developed the method to improve the precision of pipe and tool life in tube-mill processing. Optimum tool shape is devised by analyzing various simulation and mechanism in cutting process. In order to verify the confidence of the proposed machining technology, it is applied to the real processing machinery in the field.

• Journal of Environmental Science International
• /
• v.17 no.10
• /
• pp.1081-1092
• /
• 2008

This study was conducted to provide scientific information for establishing efficient and systematic measures for nature conservation and management in Manjang-gul lava tube. The number of vascular plants was 204 taxa (82 families, 176 genera, 144 species, 1 subspecies, 26 varieties and 1 forma). Of those, pteridophyte were 5 families, 12 genera, 14 species and 1 variety and gymnosperm were 4 families, 6 genera, 5 species and 1 variety. Seventy three families, 149 genera, 157 species, 1 subspecies, 24 varieties and 1 forma in angiosperm composed of 62 families, 123 genera, 137 species, 1 subspecies, 17 varieties and 1 forma in dicotyledon and 11 families, 26 genera, 20 species and 7 varieties in monocotyledon. The number of naturalized plants was 9 families, 17 genera, 18 species and 3 varieties, totaling 21 taxa.

• Journal of the Korean Society of Visualization
• /
• v.4 no.2
• /
• pp.69-75
• /
• 2006

The microbubbles were used in various fields, such as turbulent control, drag reduction, material science and life science. The X-ray PTV using X-ray micro-imaging technique was employed to mea-sure the size and velocity of micro-bubbles moving in an opaque tube simultaneously. Micro-bubbles of $10{\sim}60{\mu}m$ diameter moving upward in an opaque tube (${\phi}$=2.7mm) were tested. Due to the different refractive indices of water and air, phase contrast X-ray images clearly show the exact size and shape of over-lapped microbubbles. In all of the working fluids tested (deionized water, tap water, 0.01 and 0.10M NaCl solutions), the measured terminal velocity of the microbubbles rising through the solution was proportional to the square of the bubble diameter. The rising velocity was increased with increasing mole concentration. The microbubble can be useful as contrast agent or tracer in life science and biology. The X-ray PTV technique should be able to extract useful information on the behavior of various bio/microscale fluid flows that are not amenable to analysis using conventional methods.

• Journal of agriculture & life science
• /
• v.43 no.6
• /
• pp.105-109
• /
• 2009

Kyungsan nursery complex which has a vast area for the production of various species of fruit tree stocks is in a high demand of virus-free saplings. Apple tree stocks, the most important products, urgently need more rapid and reliable viral diagnosis. In this study, a bead beater was tested because of convenience in dealing with large number of samples. Also, industrial glass bead abrasive (0.4 mm in diameter) at very low cost was used in a disposable way. For bead beater-aided RNA extraction from apple stem tissues, the guanidine thiocyanate method was confirmed to be very reliable. Silca membrane filter tube in connection to vacuum filtering device was strongly suggested for simplifying RNA capture and washing steps. Apple virus detection was confirmed by RT-PCR.

• Journal of agriculture & life science
• /
• v.44 no.4
• /
• pp.29-43
• /
• 2010

The numerical analysis by using CFX 11.0 commercial code was done for proper design of the heat exchanger. The present experimental studies were also conducted to investigate the effects of circulating solid particles on the characteristics of fluid flow, heat transfer and cleaning effect in the fluidized bed vertical shell and tube type heat exchanger with counterflow, at which a variety of solid particles such as glass ($3mm{\Phi}$), aluminum ($2{\sim}3mm{\Phi}$), steel ($2{\sim}2.5mm{\Phi}$), copper ($2.5mm{\Phi}$) and sand ($2{\sim}4mm{\Phi}$) were used in the fluidized bed with a smooth tube. Seven different solid particles have the same volume, and the effects of various parameters such as water flow rates, particle diameter, materials and geometry were investigated. The present experimental and numerical results showed that the flow velocity range for collision of particles to the tube wall was higher with heavier density solid particles, and the increase in heat transfer was in the order of sand, copper, steel, aluminum, and glass. This behavior might be attributed to the parameters such as surface roughness or particle heat capacity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.8
• /
• pp.438-442
• /
• 2013

The alternative refrigerant R436B is applied, to assess the application feasibility for a commercial cooling water system. The characteristic stability was verified by Sealed glass tube test and Autoclave test. R436B is chemically stable with the compressor material. The Oil miscibility test shows the usual compressor oil mixed well with R436B. Through the life acceleration test, the cooling performance is maintained. Though slight changes in oil and capillary tube diameter were found, they were within the permitted range. R436B should be applied to commercial cooling water systems as a simple replacement for the usual refrigerant.

• Korean journal of applied entomology
• /
• v.43 no.4 s.137
• /
• pp.275-279
• /
• 2004

This study compared the biological characteristics, nymphal development, adult longevity, and oviposition of the bean bug, Riptortus clavatus Thunberg, in fibrous nylon and glass-tube in the insectary at $28{\pm}2^{\circ}C$ and 16L:8D of photoperiod. Nymphal duration in the fibrous nylon-tube was 1 day longer than in the glass tube; the difference was attributed to the developmental duration of the fifth instar. Percent emergence in the fibrous nylon-tube was $64\%,\;8\%$ higher than in the glass tube ($56\%$). In the fibrous nylon-tube, adult longevities for female and male were 4.1 times and 6.0 times higher than those in the glass tube. Preoviposition period was 1 day longer in the fibrous nylon-tube than that in the glass tube. The total number of eggs laid was 3.5 times more in the fibrous nylon-tube than in the glass tube. The oviposition duration lasted about 30 days for the bean bug in the fibrous nylon-tube and about 8 days for those in the glass. Accordingly, the fibrous nylon-tube was found more conducive than the glass tube for determining the biology of bean bug.

• Nuclear Engineering and Technology
• /
• v.30 no.3
• /
• pp.262-272
• /
• 1998

The experiences and causes of pressure tube cracking accidents in the CANDU reactors and the development of the fuel channel at AECL(Atomic Energy Canada Limited) have been described. Most of the accidents were caused by Delayed Hydride Cracking(DHC). In the cases of the Pickering units 3&4 and the Bruce unit 2, excessive residual stresses induced by an improper rolled joint process played a role in DHC. In the Pickering unit 2, cracks formed by contact between the pressure and calandria tubes due to the movement of the garter spring were the direct cause of the failure. To extend the life of a fuel channel, several R&D programs examining each component of the fuel channel have been carried out in Canada. For a pressure tube, the main concern is focused on changing the fabrication processes, e.g., increasing cold working rate, conducting intermediate annealing and adding a third element like Fe, V, and Cr to the tube material. In addition to them, chromium plating on the end fitting and increasing wall thickness at both ends of the calandria tube are considered. There has also been much interest in the improvement of fuel channel performance in our country and several development programs are currently under way.