• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.69-76
• /
• 2002

The aim of this study is to provide fundamental informations that make it possible to use a cool stream and a hot stream simultaneously. We changed the pressure of compressed air that flows into a tube, the inner diameter of orifice that a cold stream exits, and the mass flow rate ratio. And in each case, we measured the temperature of a cold stream and a hot stream in each exit of a tube. Also we measured the axial and the radial temperature distribution in internal spare of a tube. From the study, fellowing conclusive remarks 7an be made. First, As the number of nozzles increase, separation point move into the hot exit. Second, When we use guide vane type nozzle, the axial temperature distribution constant over the 0.75 of air mass flow rate radio. Third, When we use Spiral type nozzle, axial and radial temperature distribution in the inner space is higher than another nozzle. Fourth, Axial and radial temperature distribution in the inner space vortex-tube is determined by separation point. And separation point is moved by changing of air mass flow rate ratio. At last, A heating apparatus is possible far vortex-tube to use.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.43-43
• /
• 1999

Cold Cathode 및 Pirani Gauge Tube를 시험 제작하고 그 특성들을 조사하였다. 제작된 Cold Cathode Tube의 특성을 조사하기 위해 진공도에 따른 Anode 전압 및 방전 전류의 변화를 측정하였는데 기존의 제품들의 결과들과 비교.분석하여 개선 가능성을 제시하였다. 또한 20$\mu\textrm{m}$ 굵기의 백금선을 filament로 하는 Pirani gauge Tube를 제작하여 진공도에 따른 저항의 변화를 측정하였고 그 결과를 기존의 제품들의 결과와 비교하였다. 특히 본 연구에서는 시험 제작된 Cold Cathode 및 Pirani gauge Tube의 시험 결과를 토대로 국내 개발의 가능성을 논의하고 Gauge Controller의 설계방향 등을 제시할 것이다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.2
• /
• pp.140-148
• /
• 2002

Anisotropic elastic constants of Zr-2.5Nb pressure tube materials were determined by a high temperature resonant ultrasound spectroscopy (RUS). The resonant frequencies were measured using alumina wave-guides and wide band ultrasonic transducers in a small furnace. The rectangular parallelepiped specimens were fabricated along with the axial, radial and circumferential direction of the pressure tube. A nine elastic stiffness tensor for orthotropic symmetry was determined in the range of room temperature ${\sim}500^{\circ}C$. As the temperature increases, the elastic constant tensor, cij gradually decreases. Higher elastic constants along the transverse direction compared to those along the axial or radial direction are similar to the case of Young's modulus or shear modulus. A crossing of shear elastic constants along axial direction and radial direction was observed near $150^{\circ}C$. This fact corresponds to the crossing of c44 and c66 of single crystal zirconium.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.33.1-33.1
• /
• 2005

• Journal of Industrial Technology
• /
• v.8
• /
• pp.71-80
• /
• 1988

높은 전압으로 충전된 Capacitor를 순간적으로 원통형 coil에 방전하면 순간적으로 강한 전자장 impulse가 발생한다. 이때 coil를 둘러 싼 금속 tube는 radial 방향의 힘을 얻어 팽창한다. 본 논문은 이때 tube내의 전자장분포와 tube 벽의 움직임을 integral equation method를 사용하여 해석하였다.

• The Journal of the Petrological Society of Korea
• /
• v.18 no.3
• /
• pp.237-253
• /
• 2009

The lava flows forming the Manjanggul lava tube are commonly said to have a potential source from the Geomunoreum scoria cone. We inferred the source of lava flows with the Manjanggul lava tube, based on many studies about lava tubes within lava flows of active volcano in the world. We made a lava flow field map from lithofacies, features and latitude of lava surfaces in the northeastern part of Jeju Island, and then examined closely the distribution and mutual relation of lava tubes in each lava flow field. As result, the Geomunoreum lava tube system is divided into a series of master tubes(Utsanjeungul, Bukoreumgul, Daerimdonggul, Manjanggul, Gimnyeonggul, Yongcheondonggul and Dangcheomuldonggul lava tube), a complicated networks of small tubes(Bengdwigul lava tube), and a series of unitary tubes(Gimyeongbilemotgul~Gaeusaemgul lava tube) in Geomunoreum lava flows. Particularly a canyon, 2km in length to NNE direction from the Geomunoreum scoria cone, is interpreted to be collapse trench of lava tube roof that belongs to an upflow part of the master tube in the Geomunoreum lava tube system, according to the location and direction. Accordingly, the source of lava flows, forming the Manjanggul lava tube, is the Geomunoreum scoria cone.

• Journal of Energy Engineering
• /
• v.6 no.1
• /
• pp.52-57
• /
• 1997

Dynamic characteristics of compressible flow fields in super-circled constricted tube have been studied numerically. By applying MacCormack's explicit scheme, time marching method with predictor/corrector step, Euler equation is solved to find characteristics of fluid flow in a constricted tube where a two-dimensional inviscid compressible flow is assumed. The effects of tube diameter and aspect ratios on the pressure variations are discussed extensively. The results of the developed numerical schemes are compared with those of commercial FLUENT code, and show a good agreement.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.4
• /
• pp.48-56
• /
• 2011

A Possibility of combustion instability on longitudinal mode has a high level at large scale of L/D. Solid propellant has a metal particle and a grain of control to pressure oscillation. Solid rocket motor in slotted-tube grain controls pressure oscillation of longitudinal mode. Slotted-tube grain restrains longitudinal 1st pressure oscillation. But cavity volume of aft. insulation ablation amplifies 2nd pressure o scillation by vortext shedding. A study has suppressed combustion instability and vortex shedding by modified 4 slotted tube solid rocket motor design.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.2
• /
• pp.269-275
• /
• 1990

Nonaxisymmetric bifurcation behaviours of composite tubes two different materials subjected to uniform radial shrinkage at the external surface have been investigated and compared with those of single tube. The effect of material parameters normalized with respect to those of outer tube upon the bifurcation point and corresponding mode has been clarified. The parameters substantially affect the bifurcation mode with long-wavelength so that the composite tube with low hardening exponent or with high yield stress of inner tube destabilizes the overall deformation of the tube. However surface type bifurcation, short-wavelength mode, shown on the traction-free inner surface is hardly affected by the material parameters. The surface type bifurcation completely depends on the material characteristics of inner tube and the bifurcation point of composite tube almost coincides with the of single tube.

• Korean Journal of Materials Research
• /
• v.4 no.4
• /
• pp.445-452
• /
• 1994

Three-axial deformation behavior of the Zircaloy cladding tube under the irradiation condition of the fuel in pressurized water reactor can be analyzed by the anisotropy in the creep and the irra- diation growth, which depends on the texture parameter. A methodology to evaluate the impact of the anisotropic creep and irradiation growth on the strain in each axial direction of the cladding tube has been proposed. Based on the measured strains after irradiation and predicted ones with the help of a fuel performance analysis code, it is found that a tangential strain of the cladding tube is caused mainly by the creep, whereas a axial strain of the cladding is caused mainly by the irradiation growth but with a considerable contribution of the creep at low irradiation.