• Tribology and Lubricants
• /
• v.35 no.6
• /
• pp.369-375
• /
• 2019

This paper presents a new method on how to calculate the thrust forces acting on an auto-leveling device in headlamps for passenger vehicles. The leveling device is used to lower the angle of lights when a load in the trunk of the vehicle lifts it. In the process of the headlamp design, it is imperative to predict the external forces so that the designers can decide whether to proceed or not. The device is composed of three pivot joints with no reaction moment, a plate that holds the lamp, and a leveling motor that changes rotation to linear motion. In this study, force balance, moment balance, and geometric compatibility are applied to the leveling device system so that a nonlinear system of equations can be derived; the multi-dimensional Newton-Raphson algorithm is then used to solve these. A sensitivity analysis is carried out to verify which design variables affect the system the most: the mass of the lamp and the height between the pivot and leveling device affect the thrust forces the most. Then, considering the friction forces between the moving parts, the hysteresis of the forces are derived. An experimental apparatus, designed and developed in this study, is used to verify the exactness of the derived equations. The results from experiments coincide well with the calculated results. The friction hysteresis, in particular, proves this upon analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.672-680
• /
• 2017

A solar photovoltaic system is composed of a module mounting structure, supporting trunk, and a control unit that supplies generated electrical power to an external power grid or a load. The efficiency of the system depends on the incident solar light, so the mounting structure is installed to face the sun. However, because the sun always moves, systems that track the sun have better efficiency than fixed systems. The structure experiences wind pressure, snow load, seismic load, and structure weight. The wind pressure has the most serious effect on the structure. The pressure was obtained using finite element method for various gaps between modules and angles between the panel and the ground. The wind pressure is lowest when the gap is zero, and it increases with the inclination angle. Based on the results, a mounting structure module was designed.

• Korean Journal of Ichthyology
• /
• v.13 no.4
• /
• pp.274-278
• /
• 2001

The morphology is described of a post larva of Pomacanthus xanthometopon of the family Pomacanthidae collected in the West Pacific ($26^{\circ}9'N$, $125^{\circ}0'W$) on May 5, 2001. The specimen is moderate to deep bodied and laterally compressed. Body depth is 66.3% of body length at 8.0 mm BL. The body is covered with small spine groups, each composed of two to four spines. The anus located at a vertical through the 8th or 9th dorsal fin spine. There is no strong spine at the angle of the preopercle that appears in the adult stage. Small pigments are spread dorsally on the head, upper trunk and over the membrane of dorsal fin, from the 1st to 11th ray.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.193-205
• /
• 2006

This study was to analysis the kinematic and kinetic differences between new walking shoe(NWS : RYN) and general walking shoe(GWS). The subjects for this study were 10 male adults who had the walking pattern of rearfoot shrike with normal foot. The movement of one lower leg was measured using plantar pressure and Vicon Motion Analysis Program(6 MX13 and 2 MX40 cameras : 100 f / s) while the subjects walked at the velocity(1.5m/s. on 2m).. The results of this study was as follows : 1. The NWS was better than the GWS that caused injuries such as adduction, abduction and pronation are reduced While walking on a perpendicular surface, the landing angle and the knees angles were extensive which makes walking more safe which reduces anxiety and uneasiness. 2. The bottom of the NWS were now made into a more circular arch which supports the weight of the body and reduces the irregular angles when wearing GWS. This arch made the supporting area more wide which made the upholding the trunk of the body more effective. The whole bottom of the foot that supports the weight is more flexible in addition, increases the safeness of walking patterns and the momentum of the body. 3. The moment the heel of the foot of the NWS touch the ground, the range of the pressure were partially notable and the range of the pressure on the upper part of the thigh were dispersed The injuries that occurred while walking. primary factors when a shock related injuries are reduced Judgements of the impacts of the knees and the spinal column dispersing could be made.

• Journal of Acupuncture Research
• /
• v.18 no.2
• /
• pp.237-244
• /
• 2001

Back pain has plagued humans for many thousands of years. The treatment of back pain is divided into operative treatment and conservative treatment. It is reported that cure rate of conservative treatment is 80~90 percent. Generally, the treatment of oriental medicine is mostly conservative treatment. But, surgery should not be used as a last resort in treatment; it is just one of many treatment options for various spinal conditions. In some instance, it can be to preferred choice; in other situations, alternative therapies may be superior. Selections of the operation in HIVD 1. Acute disc herniations with a protracted significant component af back pain. 2. Chronic disc degeneration with significant back pain and degeneration limited to one or two disc levels. 3. Sugical instability created during decompression. 4. The presence of neural arch defects coincident with disc disease. 5. Symptamatic and radiographically demonstrable segmental instability. Selections of the operation in stenosis 1. If it does not slowly progress in physical therapy and other nonoperative measures, many of these patients may ultimately need surgical decompression. 2. Absolute stenosis in an impression of CT, MRI.(under 10mm) 3. In patients with established symptoms of .neurogenic claudication. 4. In patients with bad influence of neurogenic derangement.(strength, sensory) Selections of the operation in spondylolisthesis 1. Persistence or recurrence of major symptoms for at least one year despite activity modification and physical therapy. 2. Tight hamstrings, persistently abnormal gait, or postural deformities unrelieved by physical therapy. 3. Sciatic scoliosis. 4. Progressive neurologic deficit. 5. Progressive slipping beyond 25 or 50 percent, even when asymptomatic. 6. A high slip angle (40 to 50 degrees) in a growing child, since it is likely to be associated with further progression and deformity. 7. Psychologic problems attributed to shortness of trunk, abnormal gait, and postural deformities characteristic of more severe slips.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.4
• /
• pp.435-443
• /
• 2014

The purposes of this study was to investigate the physical compensation for gait on induced equinus in normal subjects. Ten subjects were participate in the experiment (age: $23.8{\pm}2.8yrs$, height: $177.3{\pm}4.3cm$, weight: $70.8{\pm}4.6kg$). The study method adopted 3D analysis with six cameras and ground reaction force with two force-plate. Induced equinus were classify as gait pattern on unilateral and bilateral equinus. The results were as follows; In displacement of COM, medio-lateral and anterior-posterior COM were no significant, but in vertical COM, unilateral equinus gait was higher than bilateral equinus gait. In displacement hip joint, left hip joint was more extended in FC1 and FC2 during unilateral equinus gait. In displacement knee joint, left knee joint was more extended in FC2, right knee joint was more extended in all event during unilateral equinus gait. In trunk tilt, unilateral equinus gait was more forward tilt in TO1 and TO2. ROM of each joint was no significant. In Displacement of pelvic tilt angle, X axis of unilateral equinus gait was more increase than bilateral equinus gait at FC2, TO2 and MS2. Y axis of unilateral equinus gait was more increase than bilateral equinus gait at MS1, FC2 and MS2. Z axis was no significant in both equinus gait. In GRF, right Fx and Fy were no significant in both equinus gait, Fz was more bigger vertical force in bilateral equinus gait. Left Fx was more bigger internal force in unilateral equinus gait, Fy and Fz were no significant in both equinus gait.

• The Journal of Korean Physical Therapy
• /
• v.33 no.1
• /
• pp.7-15
• /
• 2021

Purpose: This study was examined to improve the standing posture of a scoliosis client using the ICF Tool. Methods: For examination, the study subject was a 16-year-old female student diagnosed with 3curve-pelvic (3CP) type scoliosis. Information about her were collected through a client interview and based on international Classification of Functioning, Disability and Health (ICF). The ICF core set was for post-acute musculoskeletal conditions, and the ICF level 2 items suggested by National Rehabilitation Information Center (NARIC) were added to the recommendations for scoliosis. For evaluation, the ICF assessment sheet was used to identify the interaction among the problems. For the diagnosis, the client's functional problems were described in ICF terms. For the prognosis, the global goals for reaching the client's functional activity and participation level were presented as the long-and short-term goals. For the intervention, a coordinative locomotor training program composed of warm-up, main exercise, and cool-down was applied 3 times a week, 50 minutes a day, for 5 weeks. For the outcome, the differences between before and after the intervention were compared with the ICF qualifier and are shown with the ICF evaluation display. Results: Clinical advantages were observed in body function and structure (7° decrease of thoracic angle, 7 score increase of trunk muscle power, 6.47s improve of one leg standing, 4 score decrease of neck pain). The activity for maintaining the standing posture, in which the client had a primary limitation, was improved. Conclusion: Applying the coordinative locomotor training program is expected to improve scoliosis client's standing posture.

• Journal of The Korean Society of Integrative Medicine
• /
• v.11 no.3
• /
• pp.91-98
• /
• 2023

Purpose : The purpose of this study was to investigate the effect of the posture holding band on muscle activity of the rectus femoris, medial vastus, and vastus lateralis muscles and weight distribution during squat exercise. Methods : This study was conducted with 30 healthy adult men and women in their 20s, and all subjects were randomly assigned to the experimental group and the control group. Squat exercise was performed for 6 weeks. The experimental group received squat exercise while wearing a posture holding band, and the control group applied without wearing a posture holding band. Muscle activity of the quadriceps femoris (rectus femoris, vastus medialis, and vastus lateralis) and weight distribution (knee flexion 0 °, 30 °, 60 °, and 90 °) was measured. Results : According to the results of this study, all three muscles showed a main effect on time and group, and a significant interaction was shown only in the vastus lateralis. In addition, the value of the weight distribution difference according to the knee flexion angle did not show a main effect according to time and group at 30 ° of knee flexion, but showed an interaction. Conclusion : It was confirmed that the application of the posture holding band during squat exercise increased the muscle activity of the quadriceps muscle, and showed greater changes in the vastus lateralis muscle. In addition, it was confirmed that the difference in weight distribution was reduced in the knee flexion, and in particular, a greater change was shown in reducing the difference in weight distribution in the knee flexion of 30 °. Therefore, it is considered that the effect of the exercise can be further enhanced if the unnecessary movement of the trunk is controlled by using equipment such as a posture holding band during squat exercise.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.345-359
• /
• 2002

The purpose of the study was to provide the fundamental data to instruct athletes through the analysis athletes' movement in javelin. Three athletes in the level of national representative were participated in this study. The study analyzed kinematic variables(lead foot and releasing javelin) through 3-D analysis and obtained the following results. 1. During withdrawal, it is important to maintain of running horizontal velocity. 2. It was showed that throng average height was $84{\pm}3.3%$ and javelin adequative degree, Among the athletes, $S_2$ who had the best record was released the javelin with the fast velocity, but throw the javelin with the less releasing velocity. 3. $S_2$ released after lead foot were completely landed and therefore it is no problem in a kinematic aspect. However, $S_1$ angle was too small. it caused increase of release velocity to be prevented. 4. $S_2$ showing the best result indicated shorter in duration time. Generally, the shorter duration time in release phase showed the longer release distance. Especially $S_1$ and $S_3$ showing the worse result indicated the longer duration time in preparatory phase, causing the breakup of force. Therefore to improve the record, it should be decreased the duration time in preparatory phase. 5. Compared with $S_1$ and $S_3$, $S_2$ showing the best record indicated the higher velocity in center of mass, trunk, upper arm, lower arm and hand That is the higher velocity of upper arm at release leaded the better velocity transfer from upper arm to following lower arm and hand, these action should be considered to be helpful of better record. According to the above conclusion, when the athletic leaders cauch athletes, they should focus on maintaining knee angle, upper body and hip angle in a previous stage of release and throwing angle, throwing height, throwing velocity in a release stage.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.213-226
• /
• 2008

E. H. KIM, E. S. CHOI, D, H. NAM, S. S. KIM, J. W. CHUNG and T. W. KIM, The Instrumenfal Development for Pulling . Reaping Training & Measuring in Judo.Korean Jiurnal of Sport Biomechanics, Vol. 18, No. 1, pp. 213-226, 2008. The purpose of this study was to develop a judo-doll uke(partner : doll-uke) for training and measurement applicable to pulling, pushing and reaping in judo. In Judo the most common techniques consist of the pulling, pushing and sweep which all need to be practiced with a partner. So the research needs to develop a measurement system that can be used to evaluate the forces involved with these techniques. Also the Doll-Uke must be developed so that judokas can train alone. After the manufacture of Doll-Uke the usefulness of it must be evaluated. The height of a Doll-Uke is l70cm and its weight is 50kg. Doll-Uke was developed with a trunk angle of 55 and the lower extremities of an angle of 45. The Doll-Uke can also measure the forces developed during the pulling, pushing and sweep. Due to the ability of the system to measure the forces while preforming Judo techniques feedback can be provided to the Judokas to improve their performance.