• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.9
• /
• pp.731-734
• /
• 2018

Many studies have been conducted on the accurate detection and identification of targets from ground clutter, in order to improve the accuracy rate of land guided weapons. Due to the variety and complicated characteristics of the ground clutter signal compared to the target, an active target identification technique is needed. In this paper, we propose a new algorithm to identify targets and divide them into different types by extracting the unique characteristics of the target through fractal dimension calculation with the characteristics of self-similarity. In the simulation using the algorithm, the probabilities of identifying the tank and truck were 100 % and 98.89 %, respectively, and the type of the target could be identified with a probability of 98 % or more.

• Journal of the Korean Society of Costume
• /
• v.31
• /
• pp.119-130
• /
• 1997

The purpose of this study is to examine differences between real somatotypes and cog-nitive somatotypes by considering the degree of satisfaction of body parts. The subjects were 250 middle-aged women from 40-54. Data was collected through anthropometry and surveys. Data was analyzed by correlation analysis anova duncan multiple range test factor analysis regression analysis crosstabulation analysis. The results were as follows: 1. Middle-aged women tend to prefer having a slim truck long and slim limbs and their hope was to be tall in height and light in weight slim at the waist and abdomen. 2. The consciousness about thickness was in-tensified more than that about length of the body. 3. The slim somatotype group were more satisfied with their body than those of obese somatotype group. 4. The average R hrer Index of middle-aged women is 1.55 and the slim somatotype group is 1.33 and the standard somatotype group is 1.53 obese somatotype group is 1.82. Age has much influence on the body change of middle-aged women. Especially 45-49 years old the slim body type declined heavily. 5. When analyzing the elements of body sat-isfaction the biggest elements are in the sub-ject of girth related to the expansion of trunk. Therefore trunk girth has more influence on body satisfaction than height and limbs. So the obession of trunk girth is the most important factor in body satisfaction. 6. Most middle-aged women although not judged to be obese by measurements believed themselves to be obese.

• Journal of Korean Society of Transportation
• /
• v.12 no.4
• /
• pp.35-52
• /
• 1994

In order to operate the computerized traffic signal system, it requires the detectors which ensure the exact detections of actual traffic data (e.g., traffic volume, occupancy and velocity of vehicles). The octagonal detectors are used currently in Korea. However, the maintenance of the detectors has many problems with the road repairs and the constructions on the pavement, and failure due to the disconnection of the wires. Serious delay due to the long installation time of loops also causes the traffic disturbances. The low sensitivities and splash-over effect can sometimes create error data after installation of the octagonal loops. The mai purpose of this study is to evaluate the feasibility of domestic use of the round (circular) inductive loops which developed recently in U.S.A. It was found that the round loops are comparable to the existing octagonal loops. In addition, the use of the high quality of materials in the round loop system can reduce the current problems and weakpoints of the octagonal loops. The installation cost of the round loop was found out as economic as the octagonal loop. The installation time of the round loop system can be reduced with the specially equipped loop truck, and wide/deep slots without sharp corners can extend the durability without serious stress of loop head wires. In conclusion, the round loop is superior to the octagonal type in overall points. It is recommended that the localization of the materials and equipments of round loop system is required to carry out the extensive local installations. Also, several contractors to meet the nationwide demand should be arranged to gurantee the proper maintenance and operation of the systems.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.110-116
• /
• 2000

The soft drink deliveries are made for a broad line of soft drink products by using a hand truck and the backpack mode of carriage. The workers usually deliver the beverages by backpack mode of carriage, because they feel safe with such a carrying method in stairways. In this study, the physiological workload of backpack carrying was investigated, especially focused on the effects of weight of load and carrying by the stairway. A laboratory experiment was conducted to measure heart rate and oxygen uptake during backpack carrying tasks, and an ergonomic guideline was proposed for such type of task based on the results of the experiment. Eight healthy male subjects performed the backpack carrying of 40kg and 60kg, (1) on the level ground, (2) upstairs and (3) downstairs. The result showed that the stairways caused the increased physiological cost, and that a carrying load of 60kg required significantly higher physiological cost as compared to carrying 40kg. Although backpack carrying has some advantages in the biomechanical aspect, it should be advised to carry a load of less than 40kg, since the task requires a very high physiological cost. During backpack carrying, it is also recommended for a delivery person to make more trips with a light load rather than to make less trips with a heavier load at one trip.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.1
• /
• pp.91-100
• /
• 2008

Multi-stepwise Thermal Prestressing Method(TPSM) is a newly proposed prestressing method, which is combined the external prestressing method and the external bonding method. Multi-stepwise thermal prestressing force is induced by cooling process of cover-plate in the multi-stepwise temperature distribution after the cover-plate being bolted to the girder. In this study, the heating capacity test of the developed heating system for applying the multi-stepwise TPSM effectively and multi-stepwise TPSM inducing test of H-beam is performed. Also, a field test of the rhamen type temporary bridge is carried out to evaluate the effect and application of the multi-stepwise TPSM. Truck load was loaded and compared with the structure analysis results.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.4 s.20
• /
• pp.139-146
• /
• 2004

Resent removal work for road signs has been labor intensive and required times since it has been done manually using shaving type equipment. While traditional process is conducting, there are traffic jams caused by the passing control, and happened unexpected accidents to workers working at dangerous road circumstance. Besides, in current shaving method, there are high potentialities on the air pollution as well as the explosive accident occurred by using a propane gas. So, as an alternative, we have studied to develop the automatic erasing equipment made up with a high pressure water-jet system and automatic control system, mobile system; Wate-rjet system consists of an intensifier and nozzles to give a high pressure and spray on the sign, and automatic control system is composed of one axis robot using a hydraulic servo actuator controlled by a lever, And as a mobile system, a truck plays an important role for the transport of equipment and the forward movement in a removal process. In this paper, we have analyzed the characteristics of road signs and have investigated current erasing methods in the field. And we have organized and designed automatic erasing equipment, and we have made a basic experiment to find out the optimal spray condition as like the spray distance, spray angle and injection pressure.

• Structural Engineering and Mechanics
• /
• v.55 no.2
• /
• pp.365-377
• /
• 2015

Large-amplitude vibration of overhead sign structures can cause unfavorable psychological responses in motorists, interfere with readability of the signs, and lead to fatigue cracking in the sign structures. Field experience in Texas suggests that an overhead sign structure can vibrate excessively when supported within the span of a highway bridge instead of at a bent. This study used finite element modeling to analyze the dynamic displacement response of three hypothetical sign structures subjected to truck-passage-induced vertical oscillations recorded for the girders from four actual bridges. The modeled sign bridge structures included several span lengths based on standard design practices in Texas and were mounted on precast concrete I-girder bridges. Results revealed that resonance with bridge girder vertical vibrations can amplify the dynamic displacement of sign structures, and a specific range of frequency ratios subject to undesirable amplification was identified. Based on these findings, it is suggested that this type of sign structure be located at a bridge bent if its vertical motion frequency is within the identified range of bridge structure excitation frequencies. Several alternatives are investigated for cases where this is not possible, including increasing sign structure stiffness, reducing sign mass, and installing mechanical dampers.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.105-112
• /
• 2015

Sawmilling industry remained a high risk with the average 4.73% of industrial accidents in 2010-2012 that was eight times that of general manufacturing. Sawmilling industry had 200 industrial accidents victim in average. Manufacturing process in sawmill industry contained dangerous machinery such as conveyors, roller, saw ( band saw, circular saw) etc. It may be effective to figure out the type of industrial accidents occurred in the past and extend risk assessment which can predict hazard such as near miss when implementing exposure or potential dangers in sawmill industry. This study conducted research on the actual condition on the place of industrial accident occurrence, detailed work and contact object when injured, and injured part targeting 643 businesses which had industrial accidents in 2010-2012. As the results, RPN of general sawmill industry was the highest 'ganglip saw' with 36,157. RPN of the following order were 'moving truck' with 25,454, 'special machining operations' with 22,283. Also, probability of general sawmill industry was a lots within 1 year, while risk appeared a lots within 5 years. So, risk assessment shall be needed to emphasis on accident prevention of sawmill industry. And additional work will be needed on the risk assessment in hazard prevention work of supervisors.

• Geomechanics and Engineering
• /
• v.4 no.1
• /
• pp.39-53
• /
• 2012

Due to strong ground motion of earthquake, the material in the landslide can travel a significant distance from the source. A new landslide model called Multiplex Acceleration Model (MAM) has been proposed to interpret the mechanism of long run-out movement of this type of landslide, considering earthquake behaviors on slope and landslide materials. In previous study, this model was verified by a shaking table test. However, there is a scale limitation of shaking table test to investigate MAM in detail. Thus, numerical simulation was carried out in this study to validate MAM under full scale. A huge rock ejected and A truck threw upwards by seismic force during Wenchuan Earthquake (Ms. 8.0) was discussed based on the simulation results. The results indicate that collisions in P-phase of earthquake and trampoline effect are important behaviors to interpret the mechanism of long run-out and high velocity. The results show that MAM is acceptable and applicable.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.345-352
• /
• 2006

The purpose of this paper is to evaluate the efficiency of two yard layout of HSS at container terminal, one is that the container yard blocks are placed horizontally in parallel with berth, the other is that the yard blocks are arranged vertically in perpendicular to the berth. In stevedoring system of container terminal, stacking and transport performance are influenced according to block arrangement type of yard. Therefore, efficient design that can improve stacking and transport performance is required. In this paper, we compared their efficiency of two block arrangement concepts in terms of storage capacity, productivity, facility investments, truck service level.