• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.136-146
• /
• 2013

Truck demand analysis based on TCS data has limitation in that TCS data can not provide truck O/D data for each type of truck vehicle. This study conducted video survey for classifying truck vehicle types. By using TCS data and vehicle ratio by region/cities type, truck O/D data on expressway were estimated. It was found that average travel distances of small truck, medium truck and large truck were 52km/veh, 56km/veh and 97km/veh, respectively by analysing truck O/D data estimated in this study. The reliability analysis showed that check points where error rate is lower than 30% comprise of 87.3%. It is considered that estimated O/D data by truck vehicle types would be useful for the analysis of truck demand of expressway.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.47-57
• /
• 2012

The purpose of this study is to propose a supplement to current freight demand model by analyzing factors that influence the generation of empty truck movements in regional and urban realms. To achieve this, we examined the relation between the number of empty truck trips and various generators such as truck attributes, origin type and attributes, destination type and attributes, and commodity type. We structured the ordered logit model using 2011 Korea Transport Database (KTDB) data to analyze the generator characteristic of empty truck movements in regional and urban settings. According to the results, the characteristics of regional and urban empty truck movements differed depending on truck attributes, origin type and attributes, destination type and attributes, and commodity type.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.24 no.4
• /
• pp.63-80
• /
• 1999

In the container transportation of inland depots the empty container is an important issue. The truck dispatching problem in this paper is considered under restriction about empty containers. When a full container arrives in a depot by truck, after unloading operation the full container is changed to an empty container. After loading operation an empty container is changed to a full container. We suggest an integrated approach to the problem of simultaneously managing empty truck and container movements. We suggest an integrated approach to the problem of simultaneously managing empty truck and container movements. We would like to find the truck dispatching method minimizing empty truck movements and empty container movements. In this paper, a mixed integer programming model is developed to obtain the optimal truck dispatching in container transportation and heuristic is developed to give a good solution in much shorter time. The numerical examples are studied and the proposed heuristic is also compared with the result of numerical examples.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1559-1569
• /
• 2013

this study is to deduct the difference between regional and urban commercial trips by analyzing the characteristics of the regional and urban truck movements. To achieve this, we investigated the relation between the number of truck trips and various truck generation attributes such as truck attributes, origin and destination attributes, and commodity type using ordered logit models, which are separately estimated for regional and urban truck movements using truck diary data of Korea Transport Database (KTDB). According to the estimation results, regional and urban truck movements have different characteristics in truck attributes, origin and destination attributes and commodity type. Especially, the number of regional trucks trips increased as origin and destination are manufactural area and as the total value of products of industrial area in origin and destination increase.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.122-134
• /
• 2020

To improve traffic congestion, reduce fuel consumption, and improve the stability of truck operations, truck platooning, in which several trucks are organized in a single platoon, is being actively researched globally. Compared to the operation of a single truck, the operation of a truck platoon requires more caution before the actual operation because an accident of one vehicle in the platoon can lead to an accident with all the vehicles in the platoon. Therefore, this study examined the types of trucks and cargo suitable for truck platooning to prevent safety accidents. The review showed that a closed-van-type truck is appropriate for truck platooning to prevent falling objects during driving. In the case of cargo types, it is necessary to exclude liquids and dangerous goods defined in related laws from truck platooning.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.123-129
• /
• 2017

This study deals with the traffic accident of truck at circular intersection. The purpose of this study is to develop the truck accident models based on type of accident and conflict. In pursuing the above, the study gives particular attentions to selecting the appropriate models among Poisson and Negative binomial models using statistical program LIMDEP 8.0. The traffic accident data from 2007 to 2014 are collected from TAAS data set of Road Traffic Authority. Such the dependent variable as number of truck accidents and the 24 independent variables as geometry, traffic volume and others are used. The main results are as follows. First, 5 Poisson models (${\rho}^2$ of 0.164~0.351) which are all statistically significant are selected. Second, the common variable based on type of accident and conflict is analyzed to be truck apron width. The specific variables are, however, evaluated to splitter island, area of splitter island, speed limit sign, truck apron, number approach road, circular intersection sign, speed hump and traffic volume. Finally, widening the truck apron width and improving the above specific variables are analyzed to be important for truck accident reduction at circular intersections.

• Journal of the Korean Institute of Navigation
• /
• v.23 no.2
• /
• pp.1-9
• /
• 1999

A trailer truck is a major equipment for transporting containers, and its driving is difficult due to two degrees of freedom which exist in the joint part between truck and trailer. Especially Backing a trailer truck to a parking home is a difficult exercise for all but the most skilled truck drivers. Normal driving instincts lead to erroneous movements. When watching a truck driver backing toward a parking home, one often observes the driver backing, going forward, backing again, going forward, etc., and finally backing to the desired position along the parking home. This paper discusses the design of the controller to control the steering of a trailer truck while only backing up to a parking home from an initial position. In this paper, we propose a backing up control system for a container trailer truck using fuzzy theory where the primitive fuzzy control rules are macroscopically designed using an expert's knowledge, and the control rules are regulated by LIBL(Linguistic Instruction Based Learning) to enable to back up successfully the trailer tuck to a parking home from arbitrary initial position. The validity of the proposed parking control system is shown by applying it to some initial positions on the simulator for container trailer truck.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1603-1610
• /
• 2013

The high distribution costs causes the increasing of truck delivery time and cost, which results in reducing industrial competitiveness incre. Therefore, This study conducted research into the introduction of truck only lane for reducting distribution costs. The site of study is Keumho JCT ~ Namgumi IC of Kyeongbu Expressway which has much truck traffic because of industrial complex. Thus, this study deduced travel speed and density in each scenaria(base, bus only lane, truck only lane, two only lane). According to analysis result, if a truck only lane install, the average driving speed is 83.4km/h as a highest and density 22.47veh/km as lowest. it means that if the truck only lane is install, it will be positive influence on the expressway

• Journal of Environmental Science International
• /
• v.22 no.9
• /
• pp.1105-1113
• /
• 2013

This paper attempted to estimate the emissions of HFC-134a from scrap truck as a result of measuring the residual quantities of HFC-134a in air conditioner of scrap truck. We measured the residual amounts in the scrap truck of 138 by applying commercial recover for refrigerants. The average residual rate(disposal-phase emission factor) is reported to be $44.3{\pm}3.3%$ within a confidence interval of 95%. Recent year model trucks exhibit the higher residual rates. Little variation, however, is observed in regard to vehicle size. The HFC-134a emission quantity from scrap truck in 2011 is estimated to be 55,908 $tCO_2$-eq that demonstrates 21.4% increase to compare with that in 2007. As the numbers of truck have increased dramatically during the last two decades, the emissions of HFC-134a from scrap truck would increase sharply in the next coming years. HFC-134a is a very high GWP greenhouse gas. therefore have to reduce the emissions from the scrap truck and need to find ways to recycle. The chemical compositions of refrigerants from scrap truck are quite similar to those of new refrigerants, suggesting that the refrigerants from scrap truck could be reused as refrigerant.

• Journal of Power System Engineering
• /
• v.2 no.3
• /
• pp.68-73
• /
• 1998

The propulsion diesel engine have been widely applied with a mechanical governor to control the truck speed for a long time. But it was recently very difficult for mechanical governor to control the speed of long stock and diesel engine of truck because of hunting by dead time between fuel injection and power output. This study is aimed to configure the modeling for performance simulation regarding to diesel truck operation which could be suppressed for hunting. The modeling have been made on the base of dynamic characteristic such as electronic governor, injection of fuel system and operating states of diesel engine truck. Real model system have been introduced for deciding reacting parameters and for the comparison of resulting performance in simulation. In results of simulation, we obtained items which diesel truck drives for suppressed hunting.