• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.62-67
• /
• 2012

To realize 2-dimensional vibrational micro cutting in milling and drilling, etc. where the tools rotate, it could be a promising way to vibrate a workpiece instead of a rotating tool itself. In this study, an excitation work-table was developed using two piezoelectric materials orthogonally arranged. The trochoidal trajectory of a cutting tool which is necessary for 2D vibrational cutting is enabled in the excitation condition of higher excitation frequency and larger amplitude of vibration and the cutting condition of smaller diameter of cutting tool and lower spindle speed. The various trochoidal trajectories of a cutting tool could be generated in the excitation work-table by adjusting the input voltages to two piezoelectric materials and the phase between the two voltages and the trajectories could be readily used for the 2D vibrational micro cutting.

• 한국소음진동공학회논문집
• /
• 제21권12호
• /
• pp.1185-1191
• /
• 2011

The kinematic characteristics of cutting device significantly affects cutting performance in 2-dimensional elliptical vibration cutting(EVC) where the cutting tool cuts workpiece, traversing a micro-scale elliptical trajectory in a trochoidal motion. In this study, kinematical characteristics of EVC device constructed with two parallel stacked piezoelectric actuators were analytically modeled and compared with the experimental results. The EVC device was subjected to step and low-frequency(0.1 Hz) sinusoidal inputs to reveal only its kinematical displacement characteristics. Hysteresis in the motion of the device was observed in the thrust direction and distinctive skew of the major axis of the elliptical trajectory of the cutting tool was also noticed. Discrepancy in the voltage-to-displacement characteristics of the piezoelectric actuators was found to largely contribute to the skew of the major axis of the elliptical trajectory of the cutting tool. Analytical kinematical model predicted the cutting direction displacement within 10 % error in magnitude with no phase error, but in estimating the thrust direction displacement, it showed a $27^{\circ}$ of phase-lag compared with the measured displacement with no magnitude error.

• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.81-86
• /
• 2013

For a 2-dimensional(2D) vibration milling, an excitation work-table was developed using two piezoelectric materials orthogonally arranged, where the trochoidal trajectory of a milling tool is combined with 2 dimensional elliptical vibration of a work-table. Applying 3kHz excitation frequency and 7~8mm amplitude of vibration to micro milling process with brass and nickel materials, the roughness in both bottom and side surface is much more improved compared to the surface by conventional milling process, which is attributed to decreased frictional force, increased cutting speed, and rubbing effect of a 2 dimensional vibration.