• International Journal of Fluid Machinery and Systems
• /
• 제8권2호
• /
• pp.94-101
• /
• 2015

To investigate the influence of blade profiles on cavitation behavior in impeller of centrifugal pump, a centrifugal pump with five different blade profiles impellers are studied numerically. The impellers with five different blade profiles (single arc, double arcs, triple arcs, logarithmic spiral and linear-variable angle spiral) were designed by the in-house hydraulic design code using geometric parameters of IS 150-125-125 centrifugal pump. The experiments of the centrifugal pump have been conducted to verify numerical simulation model. The numerical results show that the blade profile lines has a weak effect on cavitation inception near blade inlet edge position, however it has the key effect on the development of sheet cavitation in impeller, and also influences the distribution of sheet cavitation in impeller channels. A slight changing of blade setting angle will induce significant difference of cavitation in impeller. The sharp changing of impeller blade setting angle causes obvious cavitation region separation near the impeller inlet close to blade suction surface and much more flow loss. The centrifugal pump with blade profile of setting angle gently changing (logarithmic spiral) has the super cavitation performance, which means smaller critical cavitation number and lower vapor cavity volume fraction at the same conditions.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.445-448
• /
• 2006

The effects of surface roughness on a spatially-developing turbulent boundary layer (TBL) were investigated by performing direct numerical simulations of TBLs over rough and smooth walls. The Reynolds number based on the momentum thickness was varied in the range $Re_{\theta}=300{\sim}1400$. The roughness elements used were periodically arranged two-dimensional spanwise rods, and the roughness height was $k=1.5{\theta}_{in}$, which corresponds to $k/{\delta}=0.045{\sim}0.125$. To avoid generating a rough wall inflow, which is prohibitively difficult, a step change from smooth to rough was placed $80{\theta}_{in}$ downstream from the inlet. The spatially-developing characteristics of the rough-wall TBL were examined. Along the streamwise direction, the friction velocity approached a constant value and a self-preserving form of the turbulent stress was obtained. Introduction of the roughness elements affected the turbulent stress not only in the roughness sublayer but also in the outer layer. Despite the roughness-induced increase of the turbulent stress in the outer layer, the roughness had only a relatively small effect on the anisotropic Reynolds stress tensor in the outer layer. Inspection of the triple products of the velocity fluctuations revealed that introducing the roughness elements onto the smooth wall had a marked effect on vertical turbulent transport across the whole TBL. By contrast, good surface similarity in the outer layer was obtained for the third-order moments of the velocity fluctuations.

• 열처리공학회지
• /
• 제11권3호
• /
• pp.216-226
• /
• 1998

Heat treatment conditions and the formation of microstructures were studied for improving the transformation-induced plasticity(TRIP) effect of retained austenite and mechanical properties of Fe-0.2%C-1.5%Si-1.5%Mn sheet steel. An excellent combination of elongation about 30% and high strength over 760MPa was achieved by processing of intercritical annealing and isothermal holding Intercritical annealing the sheet steel produced fine particles($1{\sim}2{\mu}m$) of retained austenite which were stabilized due to C enrichment by subsequent holding in bainite transformation range. Heat treatment conditions were depended on the shape and distribution of second phases as well as the volume fraction and stability of retained austenrte. In this work, the heat treatment condition of optimal strength-elongation balance was obtained by holding the steel at $400^{\circ}C$ for 200sec, after intercritical annealing at $790^{\circ}C$ for 300sec.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.110-110
• /
• 1999

Polyvinylidenefluoride (PVDF) is most used in piezoelectric polymer industry. Electrode effect on the electrical properties of PVDF has been investigated. al has been used due to fair adhesion for PVDF. Work function of metal plays an important role on the electrical properties of ferroelectrics for top and /or bottom electrode. However, Al has much lower work function than Pt or Au and so leakage current of Al/PVDF/Al may be large. Pt or Au has not been used for electrode of PVDF system due to poor adhesion. PVDF irradiated by Ar+ ion beam with O2 environment takes good adhesion to inert metal. Contact angle of PVDF to triple distilled water was reduced from 75$^{\circ}$ to 31$^{\circ}$ at 1$\times$1015 Ar+/cm2. Working pressure was 2.3$\times$10-4 Torr and base pressure was 5$\times$10-6 Torr. Pt was deposited by ion beam sputtering and thickness of pt film was about 1000$\AA$. in previous study, enhancing adhesion of Pt on PVDF was shown. in this study, effect of electrode on PVDF will be represented.

• 한국식물병리학회지
• /
• 제10권4호
• /
• pp.325-332
• /
• 1994

In order to find out formulation and effect of soil amendment on Fusarium wilt of sesame caused by Fusarium oxysporum f. sp. vasinfectum, the study was conducted during the last two years of 1992 to 1993. Among 14 chemicals (1%, w/w) added to soil including CaO individually, Al2(SO4)3, Alum, and CaO suppressed mycelial growth and conidial germination of F.oxysporum f. sp. vasinfectum. CaCl2 suppressed mycelial growth only, while glycerine, KCl, K2 HPO4, and triple superphosphate suppressed conidial germination. Suppression rate was ranged from 21 to 100% on mycelial growth. The 8 chemicals were finally selected. Among the 4 organic compounds, composted pine bark showed definite suppression on mycelial growth and conidial germination of the fungus, whereas milled alfalfa leaves was only effective on conidial germination of Fusarium wilt pathogen. The antagonist Trichoderma harzianum grew well in the soil medium amended with the composted pine bark and chemicals mixture (CPM) amendment (1%, w/w) and suppressed mycelial growth of the fungus effectively. In pot test, Fusarium wilt of sesame was completely controlled by CPM amendment.

• 한국동물위생학회지
• /
• 제22권1호
• /
• pp.85-92
• /
• 1999

This study was investigated resistance on disinfectants and antibiotics of Clostridium chauvoei isolated from dairy farm in Kyongbuk province. The results obtained were summarized as follows ; C chauvoei isolated from dairy farm were susceptible to norfloxacin, penicillin, tetracycline, erythromycin, enrofloxacin, bacitracin, tyrosine, cephalothin and cefazolin but resistant to gentamicin, kanamycin, sulfamethoxazole＋trimethoprim, amikacin, neomycin streptomycin, colistin. In effect on disinfectants, C chauvoei was inhibited completely to growth in mercuric bichloride ($HgCl_2$), harasol(sodium hypochloride 4-6%), long-life(high boiling tar acids et al), and phenol($C_6$$H_5$OH), but growth in all-stop(didecyl dimethyl ammonium chloride 10%), powercide(potassium monopersulphate 50% et al), antec vercon-s(triple salt 50% et al), and taego-51(6-alkyl-2.6-diaza-hexane-carbonic acid-1ㆍHCl et al). The effect of disinfectant was excellent in mercuric bichloride and harasol.

• 조명전기설비학회논문지
• /
• 제26권3호
• /
• pp.9-15
• /
• 2012

In this paper, we deal with a surface discharge that caused an aggravation of the dielectric strength in the $N_2/O_2$ mixture gas, When composit dielectrics were formed from the use of a solid dielectric. It was found from this study that the surface discharge voltage was deeply involved in the mixture ratio of $O_2$, the electrical property of the solid dielectric, kind of the solid dielectric, an electric field at the triple junction and a medium effect. These results expect basic data that will be used to transmission and distribution power system equipment using the $N_2/O_2$ mixture gas.

• Journal of Contemporary Eastern Asia
• /
• 제16권2호
• /
• pp.93-109
• /
• 2017

Cross-culturally, acts of sharing are recognized as an effective method to initiate and maintain human relationships in real-life situations by promoting continuous reciprocal exchanges between donors and recipients. Specifically, this study examines the effects of sharing a media product from the perspective of the givers, as compared to effects on the receivers. "Gangnam Style," a Korean music video, is of interest because it was spontaneously shared worldwide by young adults who used it as a vehicle to build and strengthen social relationships, among young adults. While both the givers and receivers of the "Gangnam Style" benefited from bridging new relationships, the results of this study found that those who gave "Gangnam Style" benefited more in terms bonding already existing relationships, compared to those who received materials. This study provides further evidence in support of the "sender-effect" paradigm and enhances our understanding of how online sharing contributes to the construction of social capital among the young adults.

• Journal of Magnetics
• /
• 제14권1호
• /
• pp.18-22
• /
• 2009

The shape anisotropy effect of a giant magnetoresistance-spin valves (GMR-SV) device with a glass/NiO/NiFe/CoFe/Cu/CoFe/NiFe layered structure for use in the detection of magnetic property of molecules within a cell was investigated. The patterned device was given uniaxial anisotropy during the sputtering deposition and vacuum post-annealing, which was performed at $200^{\circ}C$ under a 300 Oe magnetic field. The pattern size of the device, which was prepared through the photolithography process, was $2{\times}15\;{\mu}m^2$. The experimental results confirmed that the best design for a GMR-SV device to be used as a biosensor is to have both the axis sensing current and the easy axis of the pinned NiO/NiFe/CoFe triple layer oriented in the direction of the device's width, while the easy axis of the free CoFe/NiFe bilayer should be pointed along the long axis of the device.

• 한국세라믹학회지
• /
• 제35권10호
• /
• pp.1070-1077
• /
• 1998

Effect of current collecting layer on the cathode was characterized by AC impedance spectroscopy at 800$^{\circ}C$ under flowing air. LSM-YSZ composite cathode showed lower polarization resistance due to the in-crease of triple phase (LSM/YSZ/Pore) boundary length by incorporation of YSZ. Ohmic resistance {{{{ {R }_{1 } }} of LSM-YSZ was higher than that of pure LSM however because in-plane resistance of the cathode was fair-ly high due to its high specific resistivity. To reduce the in-plane resistance of LSM-YSZ cathode cathode side current collecting layer was required. Ohmic resistance {{{{ {R }_{1 } }} was reduced after forming LSM current col-lecting layer on the LSM-YSZ cathode. In case of pure LSM cathode the formation of Pt, or LSCO current collecting layer reduced polarization resistance {{{{ {R }_{p } }} but ohmic resistance {{{{ {R }_{1 } }} was relatively constant. After annealing of LSM cathode with Pt current collector at higher temperature polarization resistance {{{{ {R }_{p } }} was in-creased but ohmic resistance {{{{ {R }_{1 } }} was constant. These phenomena indicate that Pt or LSCo current col-lecting layers act as a catalytic layer for oxygen reduction of pure LSM cathode. LSCO current collector was effective in reducing the ohmic and polarization resistance of LSM-YSZ cathode.