• Proceedings of the KOR-KST Conference
• /
• 1995.02a
• /
• pp.58-82
• /
• 1995

This study providesd an empirical analysis of trip-chaining behavior and its application to transportation planning. In the empirical analysis, changes in trip-chaining patterns since 1970 have been examined and details of current trip-chaining behavior as they describe shopping trip-chaining behavior has changed. Individual trip-chaining has become longer and complex. It appears that the average number of trips per chains has substantially increased over the past 20 years. An increased number of trips in chains means fewer home-based trips. Changes in trip-chaining behavior have several consequences. Important consequences are for transportation and land-use planning. Up to now trips have been treated as if they are independent clusters of home-to-destination-to-home; this approach has not usually taken into account the trip-chaining behavior of individuals. this calls for a different approach to at least the trip generation and trip distribution part of transportation planning. In this study, application of trip-chaining behavior to trip distribution model formulation is proposed and its calibration results are presented.

• Transactions of Materials Processing
• /
• v.13 no.5
• /
• pp.409-414
• /
• 2004

TRIP steel has got attention in automobile industry because of its high strength and high formability. However, the information on deformation behavior of TRIP steel, including bending and springback, is not enough until now. In this research, the V-die bending experiment and analysis have been done to obtain the information of springback of TRIP steel. And a new numerical method, where elastic modulus is varied with the change of the strain, was suggested. Tensile test for TRIP steel was done to get tensile properties as well as strain dependency of elastic modulus of the material. Strain-dependency of elastic modulus was used the numerical analysis of V-die bending and unbending process to predict springback amount. The results were compared with experiment, showing reasonable agreement. Through the analysis of V-die bending as well as draw bending of TRIP steel, the proposed scheme with variable elastic modulus was proven to well predict the deformation behavior of TRIP steel during bending and springback.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.213-216
• /
• 2009

In this study, three cold-rolled TRIP steels containing different Al content (0.04wt%, 1.0 wt.% and 2.00wt%) were fabricated to understand the complex effects of Al in TRIP steel. The influences of Al on microstructural evolution of cold-rolled TRIP steels have been analyzed by using advanced analysis techniques, such as transmission electron microscope (TEM) and three dimensional atom probe tomography (3D-APT). TEM results revealed that second phases such as bainte and retained austenite decrease with increase of Al content. In addition, 3D-APT was used to characterize atomic-scale distribution of alloying elements at the constituent phases. Through these analysis techniques, the advanced characteristics of constituent microstructure in TRIP steels were identified depending on Al contents in TRIP steels.

• The Journal of Information Systems
• /
• v.28 no.4
• /
• pp.49-64
• /
• 2019

Purpose The purpose of this paper is to observe the relative priorities of importances among IT services for Smart tourism as well as the relative priorities of importances among ways for developing the IT Services. Design/methodology/approach AHP analysis model was designed with 3 layers in order to recognize the relative importances priorities of IT services and the ways developing the IT services in Smart tourism. The factors in the top layer consist of Pre-trip IT services, During-trip IT services and Post-trip IT services. The lower factors in second layer of the Pre-trip IT services consists of Tourism information search, Online reservation and Price comparison. The lower factors of the During-trip IT services consists of Context recognition, Virtual Reality and Drone Application. The lower factors of the Post-trip IT services consists of Interactive Sharing and Tagging. The factor of third layer, the ways of developing the IT services consist of Company leading, University leading and Industry-University Collaboration. The structural questionnaire based on the AHP analysis model was designed and used to survey experts in IT and tourism areas. The collected data by the question investigation was analyzed by AHP analysis technique. Findings The importance priority of During-trip IT service was highest among in the three type IT services of tourism life cycle. The importance priority of Price comparison service was highest among IT services for Pre-trip. The importance priority of the Context recognition service was highest among IT services for During-trip. The Interactive sharing service was highest among IT services for Post-trip. It would be confirmed for the IT service development ways of Company leading to be suitable for most of the It services, such as Tourism information search, Online reservation, Price comparison, Context recognition, Virtual reality, Drone application, Interactive sharing.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.7-16
• /
• 2008

There are unique aspects of truck vehicle movements compared with the personal travel in trip chaining. This paper reports an analysis on the truck vehicle trip chaining which intercity/metropolitan/intraregional trips are classified. Data collected from the travel dairy survey is used the truck trip-chaining analysis. The pattern of trip chaining classes is classified by the GIS mapping based on orgin-destination trip information. The physical index and efficiency index for each trip diary is used to the truck vehicle activity. Truck trips lengths and time differs from its truck type, service type and travel patterns. It is shown that the efficiency of the truck trip chaining depends on vehicle types and its delivery patterns. There are many other topics for research on trip chaining modeling such as the classification of trip chain, time use and mode choice by trip chaining.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.273-276
• /
• 2008

In this study, microstructure and distribution of alloy elements were investigated in thermo-mechanically processed C-Mn-Si transformation induced plasticity (TRIP) steels. The microstructures of TRIP steels were investigated by using advanced analysis techniques, such as three dimensional atom probe tomography (3D-APT). At first, the microstructure was observed by using TEM. TEM results revealed that microstructure of C-Mn-Si TRIP steel was composed of ferrite, bainte, and retained austenite. 3D-APT was used to characterize atomic-scale partitioning of added elements at the phase interface. In the retained austenite phase, Ti and B were enriched with C. However, there was no fluctuation of Mn and Si concentration across the interface. Through these analysis techniques, the advanced characteristics of constituent microstructure in C-Mn-Si TRIP steels were identified.

• Transactions of Materials Processing
• /
• v.19 no.1
• /
• pp.44-49
• /
• 2010

It has been widely reported that carbide-free bainitic steels or super-bainite TRIP (SB-TRIP) steels for the automotive industry are a new family of steels offering a unique combination of high strength and ductility. Hence, it is important to exactly evaluate the volume fraction of RA and to identify the 3-D morphology of constituent phases, because it plays a crucial role in mechanical properties. Recently, as electron back-scattered diffraction (EBSD) equipped with focused ion beam (FIB) has been developed, 3-D EBSD technique for materials science are used to these steels. Moreover, newly developed atom probe tomography (APT) technique can provide the exact distribution and chemical concentration of alloying elements in a sub-nm scale. The APT analysis results indicate exactly the distribution and composition of alloying elements in the austenite and bainite phases of SB-TRIP steels with the atomic-scale resolution. And thus, no partitioning of aluminum and manganese atoms was showed between the austenite containing $7.73{\pm}0.39$ at% C and the bainitic ferrite associated with $0.22{\pm}0.06$ at% C in SB-TRIP steel.

• Journal of Korean Society of Transportation
• /
• v.14 no.4
• /
• pp.31-48
• /
• 1996

This paper develops a disaggregate model system for travel behavior of workers in a metropolitan area. We attempt to develop a set of models for predicting trip generation type, trip purpose, destination, mode choices in each trip on the way from work to home by using the concept of utility maximization of base-to-base tour. The model incorporates the concept that decisions of a trip in a trip in a travel tour depend on decisions of the trips having been made before and decisions of trip planned after of this trip, as well as on current trip conditions. As the structure of the model, the nested logit model is used to avoid a simultaneous model's complexity. The data to be used for estimating the model system are from the person trip survey which was carried out in 1981 in Nagoya metropolitan. Empirical tests of the model for Nagoya metropolitan area show encouraging results and prove the validity of the assumption of this model.

• Journal of Korean Society of Transportation
• /
• v.33 no.2
• /
• pp.113-124
• /
• 2015

The KOTI(Korea Transport Institute) released the new version of KTDB(Korea Transport DataBase) in public. The new KTDB is different from the past KTDB in using the concept of trip generation and trip attraction instead of using the concept of Origin-Destination (OD), which was used in the past KTDB. Thus, the appropriate analysis method for future travel demand became necessary for the new type of KTDB. The method should be based on the concept of PA(Production-Attraction). This study focused on analysis of trip generation and trip distribution related to newly generated trips by future land developments. The study also described clearly the standardized forecasting process and methods with PA travel tables. The study showed that the analysis results with OD-based analysis can be different from the results with PA-based analysis in forecasting travel demand for a simple example case even though they used exactly same orignal travel data. Therefore, this study emphasized that a proper method should be applied with the new PA-based KTDB. It is necessary to prepare and disseminate guidelines of the proper forecasting method and application with PA-based travel data for practician.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.658-661
• /
• 1996

Information that can be obtained from nuclear power plant trip cases is important for the efforts to reduce the trip occurrences. However, trip case reports, generally printed in documents, have shortcomings in using the contents. A database system called Information System of Trip Event Cases (INSTEC) is being developed to improve the use of trip information. INSTEC will provide the information obtained from the analysis of Korean nuclear power plant trips, such as component failures or human errors that induced the trips, problems contributed to the trips, and the sequence of unit events. In this study, in the process of INSTEC development, information analysis has been performed and a prototype of the system was developed. The prototype of INSTEC with user interface was presented to plant personnel to collect their opinion on INSTEC by using a questioninnaire. As results, it is confirmed that INSTEC would be helpful and useful for plant personnel to review the trip case information.