• 디지털산업정보학회논문지
• /
• 제17권4호
• /
• pp.85-94
• /
• 2021

The LPR system's trigger sensor makes problem occasionally due to the heave weight of vehicle or the obsolescence equipment. If we replace the hardware sensor to the deep-learning based software sensor in order to generate the trigger signal, LPR system maintenance would be a lot easier. In this paper we proposed the deep-learning sliding window based object detection and tracking algorithm for the LPR system's trigger signal generation. The gate passing vehicle's license plate recognition results are combined into the normal tracking algorithm to catch the position of the vehicle on the trigger line. The experimental results show that the deep learning sliding window based trigger signal generating performance was 100% for the gate passing vehicles including the 5.5% trigger signal position errors due to the minimum bounding box location errors in the vehicle detection process.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(3)
• /
• pp.37-40
• /
• 2001

There are over a billion web sites on the Internet and the number of web sites is still growing. This paper describes an information system. We have designed Trigger Agent System based on RMI (Remote Method invocation) and distribution object system. In this paper, we introduce Trigger agent system which is one of Intelligent agent system.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.201.2-201.2
• /
• 2016

The triggered vacuum switch (TVS) is widely used as a high power switch in the field of pulsed power application. TVS can produce current of higher than 100 kA within a microsecond after being triggered. A triggering high voltage pulse generator supplies a high voltage signal to the trigger system to initiate the discharge between a trigger pin and one of main electrode. The trigger system, which consists of a tungsten trigger electrode and cylindrical ceramic insulator around it, is normally installed at the center of main cathode electrode. The discharging characteristics of the trigger system strongly depend on the geometry, electrode material, vacuum pressure and so on. In addition, we especially will focus on the developing a triggering pulse generator, which can vary not only value of voltage but also pulse duration, because its properties gives pivot influences on the TVS discharge. To verify such effects, we made a 3.3 kJ TVS set-up initially. Thus we will discuss some of prominent results from 3.3 kJ TVS system. In parallel we will show on the design of 300 kJ TVS system for the high current in the future.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.33-37
• /
• 2017

To protect the power systems from fault current, the rated protective equipment should be installed. However growth of power system scale and concentration of loads caused the large fault current in power transmission system and distribution system. The capacities of installed protective equipment have been exceeded the due to increase of fault current. This increase is not temporary phenomenon but will be steadily as long as the industry develops. The power system operator need a counter-measurement for safety, so superconducting fault current limiter (SFCL) has been received attention as effective solutions to reduce the fault current. For the above reasons various type SFCLs have been studied recently. In this paper, operation characteristics and power burden of trigger type SFCL is studied. The trigger type SFCL has been used for real system research in many countries. Another trigger type SFCL (double quench trigger type SFCL) is also studied. For this paper, short circuit test is performed.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권7호
• /
• pp.359-364
• /
• 2000

This paper is introducing a newly developed spark-gap switch with dual trigger system, into which the current from the voltage source is injected along with the test sequence during the synthetic testing of high voltage circuit-breaker. The currently-used spark gap switch is narrow in operating range due to the use of the method of triggering energy being injected by single way. As a result, the frequent happening of misoperation has greatly reduced the test quality and test efficiency and has required the cost of maintenance excessively. In this study, accordingly, in order to basically remove these problems, another triggering system is installed to the opposite direction on the existing triggering system; attaching the same time and the same rising time of pulse wave as on the existing system, so that at a comparatively trigger gap distance from the main electrode(the gap can be operated at 60% of self-break voltage, while at 80% in the current system), the main electrode has been enabled to be closed by the development of spark gap switch with dual trigger system.

• Journal of the Korean Physical Society
• /
• 제80권
• /
• pp.117-122
• /
• 2022

The Belle II detector at the SuperKEKB e⁺e^- collider in Japan is designed for precise measurements of weak interaction parameters and new physics beyond the Standard Model; therefore, it requires very high instantaneous luminosity. To handle such high luminosity, the level-1 trigger system in the Belle II experiment is designed to efficiently trigger events of interest with the highest efficiency. Among many sub-detectors, track reconstruction of charged particles is performed using information collected from the central drift chamber. Therefore, the central drift chamber-based trigger plays a central role in distinguishing specific types of physics based on fast track reconstruction. To improve the longitudinal position resolution of a track vertex and for the fine-tuning of trigger signal timing, the time of the collision, which we call event time, is necessary. We developed an event time finding algorithm using the wire hit time information obtained from the central drift chamber and validated our algorithm through Monte Carlo simulation.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.925-930
• /
• 2013

The fault current of the power transmission system is greater than that of the power distribution system. Therefore, the introduction of superconducting fault current limiter (SFCL) is more needed to reduce the increased fault current. The trigger-type SFCL consists of the high-temperature superconducting element (HTSC), the current limiting reactor (CLR) and the circuit breaker (CB). The trigger-type SFCL can be used to supplement the disadvantages of the resistive-type SFCL. The operation characteristics of the current ratio differential relay which is usually applied to the protection device of the power transmission system are expected to be affected under fault conditions and the applicability of the trigger-type SFCL. In this paper, we analyzed the operating characteristics, by the fault conditions, between the current ratio differential relay for line protection and the trigger-type SFCL in the power transmission system through the PSCAD/EMTDC simulation.

• 한국컴퓨터정보학회논문지
• /
• 제24권10호
• /
• pp.149-157
• /
• 2019

본 논문은 지능형 위치추적을 위한 위치트리거와 이동에이전트 시스템 기술을 적용하여, 상황인식 기반 위치서비스를 위한 위치트리거 시스템을 설계 및 구현한다. 또한, 트리거 및 조치 서비스 프로토콜 구현과 능동규칙 탑재 이동에이전트에 대한 실험을 통하여, 제안 시스템이 상황인식 기반 위치서비스의 특성에 따른 시스템 최적화 및 위치 기반 서비스 응용들에 대한 확장성과 유효성이 있음을 검증한다. 제안 시스템은 전력 사용자의 소비 패턴 및 행위 변화에 대한 시스템의 능동적 특성을 통한 자원 활용의 최적화 시스템 구축을 위한 예비 연구로써, 객체 위치 기반의 지능적 경고와 조치를 통한 환경 및 자원 활용 최적화와 다양한 위치서비스 응용 시스템 구축에 효과적으로 적용할 수 있다.

• 디지털콘텐츠학회 논문지
• /
• 제13권3호
• /
• pp.291-299
• /
• 2012

유비쿼터스 컴퓨팅은 환경 및 사용자의 상황을 필요로 하는 곳에 센서 노드들을 부착해 환경 정보를 수집하여 사용자에게 적합한 서비스를 제공하는 기술이다. 수시로 변화하는 사용자의 환경과 상황에 따라 서비스 내용도 새롭게 갱신될 수 있는 지능적인 시스템이 필요하다. 본 논문에서는 사용자의 위치와 행동에 따른 지능적인 서비스 제공을 위한 컨텍스트 온톨로지 설계, 그리고 사용자의 행동과 연관된 서비스 패턴을 지능적으로 마이닝 하기 위한 트리거 규칙 정의와 트리거 시스템의 통합 구조인 능동 마이닝 아키텍쳐를 제안한다. 제안된 시스템은 사용자의 시간에 따른 위치 및 객체와의 연관성을 고려하여 사용자의 행동과 서비스 패턴을 지능적으로 마이닝 하기 위한 기반이 된다.

• 한국정보과학회논문지:데이타베이스
• /
• 제29권6호
• /
• pp.492-501
• /
• 2002

비동기 트리거 처리기(ATP)는 데이타베이스 트랜잭션의 수행이 완료된 후에 트리거를 처리하는 소프트웨어 시스템이다. ATP 내에서는 트리거 조건의 효율적인 검사를 위하여 차별화 네트워크(discrimination network)가 사용된다. 차별화 네트워크는 내부 상태를 메모리 노드에 저장한다. TrigerMan은 하나의 ATP로써 차별화 네트워크로써 Gator 네트워크를 사용한다. 데이타베이스의 내용 변화는 트리거맨에 토큰 형태로 전달된다. 트리거 조건의 검사는 토큰이 Gator 네트워크를 통과하면서 이루어지는데, 이때 Gator 네트워크의 메모리 노드들이 갱신된다. 토큰의 병렬처리는 시스템의 성능을 향상시키는 여러 방법 중 하나이지만 통제되지 않은 병렬처리는 잘못된 트리거 액션 수행을 유발한다. 이 논문은, 최소한의 이상 현상만을 허용하며 토큰의 병렬 처리를 가능하게 하는, 네 가지 트리거 처리 일관성 레벨을 제안한다. 우리는 각 일관성 레벨에 대하여 병렬 토큰 처리를 가능하게 하는 고유한 기술을 개발하였다. 제안된 기술은 안정된 방법이라는 사실이 공리를 통하여 증명되었으며, 이 기술은 실체화 된 (materialized) 뷰 유지 (view maintenance)에 사용될 수 있다.