• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.406-413
• /
• 2000

The friction and wear behaviors of Magnetron Sputtered MoS$_2$films were investigated by using a pin on disk type tester which was designed and manufactured for this experiment. The experiment was conducted by using silicon nitride (Si$_3$N$_4$) as a pin material and Magnetron Sputtered MoS$_2$on bearing steel (STB2) as a disk material, under operating conditions that include different surface roughness (Polishing specimen, Grinding specimen)(2types), linear sliding velocities in the range of 22, 44, 66mm/sec (3types), normal loads vary from 9.8N, 19.6N, 29.4N(3types), corresponding to contact pressures of 1.9∼2.7GPa and atmospheric conditions of high vacuum( 1.3${\times}$10$\^$-4/Pa), medium vacuum( 1.3${\times}$10$\^$-l/Pa), ambient air(10$\^$5/Pa)(3types). We investigated fracture mechanism in magnetron sputtered MoS$_2$films with Magnetron Sputtering method in each experiment.

• Tribology and Lubricants
• /
• 제40권4호
• /
• pp.118-132
• /
• 2024

The triboelectric nanogenerator (TENG) has emerged as a groundbreaking technology for harvesting clean and sustainable energy cost effectively. For reliable TENG design, minimizing wear damage at the friction layers is crucial. This review provides a comprehensive overview of tribometer-integrated TENG testing configurations used in the simultaneous investigation of both tribological and electrical performance. It considers configurations such as plate-on-plate, ball-on-disc, and ball-on-flat tribometers designed for linear reciprocating or rotating sliding friction tests. These tribometers are either specifically designed or adapted for TENG testing. Triboelectric material holders facilitate friction tests by establishing electrical connections from the triboelectric materials or electrodes, thereby enabling accurate measurement of electrical signals. Electrometers and oscilloscopes record electrical outputs such as short-circuit current and open-circuit voltage. This integration enables the simultaneous measurement of both friction and electrical outputs, providing a thorough understanding of TENG performance. The review also summarizes how factors such as normal force, sliding frequency, and rotating speed affect friction coefficients and TENG performance. It also examines the relationship between the coefficient of friction and tribocharges under various loads and frequencies. The review emphasizes the importance of these testing configurations for evaluating both friction and electrical performance, which are crucial for optimizing TENG efficiency. Finally, the review explores future prospects for developing innovative tribometer designs suited for both tribology and TENG testing.

• 한국진공학회지
• /
• 제15권3호
• /
• pp.287-293
• /
• 2006

R.F. PACVD법을 이용하여, 벤젠을 반응기체로 사용하여 순수한 DLC필름을 증착하였다. DLC필름의 마찰마모특성은 시험 환경을 제어하기 위하여 챔버로 고립된 ball-on-disk형식의 마모시험기를 이용하여 측정하였다. 상대습도에 따른 필름의 마찰특성을 관찰하기 위하여, 상압에서 챔버 내의 습도를 0-90%로 조절하면서 관찰하였다. 그리고 상대면 물질의 영향을 알아보기 위하여 스틸볼과 함께 DLC필름이 코팅된 스틸볼을 사용하였다. 스틸볼을 사용시 습도가 0%에서 90%로 증가함에 따라 마찰계수가 0.025에서 0.2로 크게 증가하였다. Ferich debris가 생성되지 않는 DLC가 코팅된 볼을 사용하여 실험한 경우에, 마찰계수는 상대 습도가 90%인 경우에도 0.08정도로, 스틸볼을 사용하였을 경우보다 훨씬 더 낮은 습도의존성을 보여주었다. 스틸볼 사용시 나타나는 DLC필름의 마찰계수의 큰 습도의존성은 습도가 증가함에 따라 debris의 크기 증가와 함께 스틸볼의 마모로 인한 Fe-rich debris의 생성과 밀접한 관계가 있음을 확인 할 수 있었다. 그리고 스틸볼을 사용하여 90%의 습도에서 마모시험을 하는 중간에 습도를 0%로 변화시키며 관찰한 결과, 마찰계수 값이 급격히 감소하였다. 이와 같은 결과를 통하여, Fe-rich debris가 마찰계수에 미치는 영향은 debris내의 Fe원소가 습도에 매우 민감한 흑연상의 전이층을 형성시킨다는 것을 확인 할 수 있었다.

• 대한기계학회논문집A
• /
• 제41권1호
• /
• pp.21-30
• /
• 2017

디스크 브레이크의 온도는 제동 시 변할 수 있으며 이러한 표면 온도의 변화는 마찰/마모 특성에 영향을 줄 수 있다. 따라서 효율이 우수한 브레이크 개발을 위해서는 브레이크 소재의 마찰/마모 특성에 대한 이해가 필요하다. 본 연구에서는 디스크 브레이크 시스템에 사용되는 C/C-SiC-Cu복합재와 Al/SiC복합재에 대하여 표면 온도와 접촉압력에 따른 마찰/마모 특성을 비교하였다. 이를 위해 온도 및 하중조절이 가능한 pin-on-reciprocating방식의 마찰실험기를 사용하였다. 실험결과, 마찰은 온도와 거리에 따라 현저하게 변하였다. 또한 마모로 인하여 생성된 입자가 접촉 압력에 의해 표면에 뭉쳐져 transfer layer가 형성되었고, 표면 거칠기가 증가하였다. 이러한 연구 결과는 다양한 조건에서 작동하는 브레이크 시스템 개발을 위한 기초자료로 활용될 수 있을 것이다.

• Tribology and Lubricants
• /
• 제11권5호
• /
• pp.128-135
• /
• 1995

Atomic force microscopy/friction force microscopy (AFM/FFM) techniques are increasingly used for tribological studies of engineering surfaces at scales, ranging from atomic and molecular to microscales. These techniques have been used to study surface roughness, adhesion, friction, scratching/wear, indentation, detection of material transfer, and boundary lubrication and for nanofabrication/nanomachining purposes. Micro/nanotribological studies of single-crystal silicon, natural diamond, magnetic media (magnetic tapes and disks) and magnetic heads have been conducted. Commonly measured roughness parameters are found to be scale dependent, requiring the need of scale-independent fractal parameters to characterize surface roughness. Measurements of atomic-scale friction of a freshly-cleaved highly-oriented pyrolytic graphite exhibited the same periodicity as that of corresponding topography. However, the peaks in friction and those in corresponding topography were displaced relative to each other. Variations in atomic-scale friction and the observed displacement has been explained by the variations in interatomic forces in the normal and lateral directions. Local variation in microscale friction is found to correspond to the local slope suggesting that a ratchet mechanism is responsible for this variation. Directionality in the friction is observed on both micro- and macro scales which results from the surface preparation and anisotropy in surface roughness. Microscale friction is generally found to be smaller than the macrofriction as there is less ploughing contribution in microscale measurements. Microscale friction is load dependent and friction values increase with an increase in the normal load approaching to the macrofriction at contact stresses higher than the hardness of the softer material. Wear rate for single-crystal silicon is approximately constant for various loads and test durations. However, for magnetic disks with a multilayered thin-film structure, the wear of the diamond like carbon overcoat is catastrophic. Breakdown of thin films can be detected with AFM. Evolution of the wear has also been studied using AFM. Wear is found to be initiated at nono scratches. AFM has been modified to obtain load-displacement curves and for nanoindentation hardness measurements with depth of indentation as low as 1 mm. Scratching and indentation on nanoscales are the powerful ways to screen for adhesion and resistance to deformation of ultrathin fdms. Detection of material transfer on a nanoscale is possible with AFM. Boundary lubrication studies and measurement of lubricant-film thichness with a lateral resolution on a nanoscale have been conducted using AFM. Self-assembled monolyers and chemically-bonded lubricant films with a mobile fraction are superior in wear resistance. Finally, AFM has also shown to be useful for nanofabrication/nanomachining. Friction and wear on micro-and nanoscales have been found to be generally smaller compared to that at macroscales. Therefore, micro/nanotribological studies may help def'me the regimes for ultra-low friction and near zero wear.

• 대한기계학회논문집A
• /
• 제39권8호
• /
• pp.765-772
• /
• 2015

주철은 산업현장에서 중장비나 철도차량 등과 같은 다양한 기계장치의 주재료로 널리 사용된다. 이러한 기계장치의 운전 성능은 접촉 특성에 따라 크게 좌우되며 이를 개선시키기 위한 연구들이 진행되고 있다. 본 연구에서는 모래와 알루미나 입자가 주철의 마찰/마모 특성에 미치는 영향에 대해 다양한 조건에서의 미끄럼 실험을 통해 규명하였다. 입자의 크기 및 시편 온도 등을 변수로 하여 스틸 볼이 pin 으로 장착된 pin-on-reciprocator 방식의 트라이보테스터를 사용하여 실험을 진행하였다. 주사전자현미경(Scanning Electron Microscope), confocal microscope 와 3d profiler 를 이용해서 주철 시편과 스틸 볼의 마모 표면을 관찰하고 마모량을 정량적으로 측정하여 마모 특성을 파악하였다. 실험 결과 주철의 마찰/마모 특성은 입자 주입에 의해 크게 달라짐을 알 수 있었다. 또한, 주철 시편에 가해준 온도에 따라 마찰/마모 특성이 크게 달라지는 것을 확인하였다. 이 연구의 결과는 산업에서 주철 재료의 트라이볼로지 특성을 이해하는데 도움이 될 것이다.

• Tribology and Lubricants
• /
• 제32권4호
• /
• pp.132-139
• /
• 2016

The piston of a marine diesel engine works under severe conditions, including a combustion pressure of over 180 bar, high thermal load, and high speed. Therefore, the analyses of the fatigue strength, thermal load, clamping (bolting) system and lubrication performance are important in achieving a robust piston design. Designing the surface profile and the skirt ovality carefully is important to prevent severe wear and reduce frictional loss for engine efficiency. This study performs flexible multi-body dynamic and elasto-hydrodynamic (EHD) analyses using AVL/EXCITE/PU are performed to evaluate tribological characteristics. The numerical techniques employed to perform the EHD analysis are as follows: (1) averaged Reynolds equation considering the surface roughness; (2) Greenwood_Tripp model considering the solid_to_solid contact using the statistical values of the summit roughness; and (3) flow factor considering the surface topology. This study also compares two cases of skirt shapes with minimum oil film thickness, peak oil film pressure, asperity contact pressure, wear rate using the Archard model and friction power loss (i.e., frictional loss mean effective pressure (FMEP)). Accordingly, the study compares the calculated wear pattern with the field test result of the piston operating for 12,000h to verify the quantitative integrity of the numerical analysis. The results show that the selected profile and the piston skirt ovality reduce friction power loss and peak oil film pressure by 7% and 57%, respectively. They also increase the minimum oil film thickness by 34%.

• KSTLE International Journal
• /
• 제2권2호
• /
• pp.138-141
• /
• 2001

Tribological behaviors of a borate of triethanolamine in water solution were evaluated using a four-ball wear tester. X-ray photoelectron spectroscopy (XPS) was employed to study tribochemical species on worn scars of steel balls. Results show that a thick deposit layer was produced on the worn scars, which came from the decomposition of the borate. The surface film on the worn scars was mostly consisted with H$_3$BO$_3$, B$_2$O$_3$and large amounts of ferricyanides.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.3-32
• /
• 2016

High power impulse magnetron sputtering (HiPIMS) technique has been developed for more than 15 years. It is characterized by its ultra-high peak current and peak power density to obtain unique thin film properties, such as high hardness, good adhesion and tribological performance. However, its low deposition rate makes it hard to be applied in industries. In this work, the development of HiPIMS system and integration of radio frequency (RF) or mid-frequency (MF) power supplies were introduced. Effects of duty cycle and repetition frequency on the microstructure, mechanical property, optical and electrical properties of some binary, ternary and quarternary nitride coatings and oxide thin films were discussed. It can be observed that the deposition rate was effectively increased by the superimposed HiPIMS with RF or MF power. High hardness, good adhesion and sufficient wear resistance can be obtained through a proper adjustment of processing parameters of HiPIMS power system.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.118.1-118.1
• /
• 2016

The laser surface modification has been reported for its functional applications for improving tribological performance, wear resistance, hardness, and corrosion property. In most of these applications, continuous wave lasers and pulsed lasers were used for surface melting, cladding, alloying. Since flexibility in processing, refinement of microstructure and controlling the surface properties, technology utilizing lasers has been used in a number of fields. Especially, femtosecond laser has great benefits compared with other lasers because its pulsed width is much shorter than characteristic time of thermal diffusion, which leads to diminish heat affected zone. Moreover, laser surface engineering has been highlighted as an effective tool for micro/nano structuring of materials in the bio application field. In this study, we applied femtosecond and nanosecond pulsed laser to treat biometals, such as Mg, Mg alloy, and NiTi alloy, by heating to improve corrosion properties and functionalize their surface controlling cell response as implantable biomedical devices.