• 터널과지하공간
• /
• 제30권6호
• /
• pp.559-572
• /
• 2020

본 연구에서는 현지 암반의 진삼축 응력 조건과 온도 변화를 고려한 공벽 안정성 실험을 수행하고, 심부 지하의 응력 조건과 압력 조건에서 암석의 열역학적 거동을 관찰하였다. 중국 황색 사암과 국내 황등 화강암 시료를 이용하여 진삼축압축실험을 진행하였다. 역학 실험은 각각 9가지 구속압 조건에서 수행되었고 열역학 실험은 화강암 시료를 이용하여 6가지 구속압 조건에서 시료를 60℃~100℃로 가열하여 수행하였다. 역학 실험 결과 공벽 파괴가 발생하는 최대 주응력은 중간 주응력에 비례하는 것을 확인하였다. 열역학 실험에서는 온도 증가에 따라 공벽의 응력장에 열응력이 추가되어 공벽 파괴가 추가적으로 발생하는 것을 확인하였다. 실내 실험 결과를 분석하기 위해 모기쿨롱 파괴 기준식을 사용하여 분석하였다. 원통형 시료에 대한 전통적인 삼축압축시험 결과와 진삼축 조건 하의 공벽 파괴 실험 결과가 모두 진삼축 파괴 기준식인 모기쿨롱 파괴 기준식에 잘 부합됨을 확인하였다.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.4012-4017
• /
• 2010

이 연구에서는 팩 말뚝과 모래다짐말뚝의 전단강도 특성을 비교하기 위해 모래-팩-점토 복합토 및 모래-점토 복합토를 인위적으로 치환율($a_s$) 10%, 20%로 재성형하여 구속압력을 변화시켜가며 삼축압축시험(CU Test)을 실시하였다. 시험결과 모래-점토 복합토에 비해 모래-팩-점토 복합토의 강도가 치환율 10% 및 20% 모두에서 훨씬 크게 측정되어 모래다짐말뚝보다 팩말뚝이 큰 지지력을 갖는다는 것을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1124-1131
• /
• 2008

Thanks to a new in-situ seismic probe, using bender elements and penetration scheme, a simple linear relationship between undrained shear strength(Cu) and shear wave velocity(Vs) was obtained. This priceless relationship is worthy to be illuminated further in ideal laboratory environment. To avoid sampling disturbance effect, special consolidation cylinders were used to make normally consolidated specimens from kaolinite suspension. The undrained shear strengths of the specimens were measured using unconsolidated undrained triaxial compression tests. Also shear wave velocity measurements were performedprior to shearing the same specimens, using the bender elements installed in the base pedestal and the top cap of the triaxial compression cell. The Cu-Vs relationship is fairly linear and supports the linear trend of clayey silt obtained using field testing. Also the classic density-shear modulus relationship for soft clay proposed by Hardin and Black(1969) was once more verified hereby.

• 한국지반공학회지:지반
• /
• 제9권2호
• /
• pp.27-40
• /
• 1993

한 개의 공시체에 대해 일정한 크기의 높은 구속압력을 가하고, 단계별로 압밀배수시간을 조정하여 압밀비배수 삼축압축시헙을 할 수 있는 방법을 이 논문에서 제안하였다. 이 방법으로 시험하면 하나의 공시체로 여러 단계의 시험을 하여 강도정수를 구할 수 있음은 물론 시험시간이 종전의 다단계시험에 비해 현저히 절약된다. 이 시험에 대한 적합성을 증명하기 위하여 불교란 시료와 재성형시료에 대해 표준압축시험과 재래의 다단계시험을 수행하고 그 결과를 비교하였다. 여기서 제안하는 시험방법으로 결정된 강도정수는 다른 시험방법으로 얻은 강도정수와 잘 일치하였으며, 이 방법이 대단히 효과적이고 실용적이라는 것을 입증하였다.

• Geomechanics and Engineering
• /
• 제23권3호
• /
• pp.189-206
• /
• 2020

The accurate modeling of boundary conditions is important in simulations of the discrete element method (DEM) and can affect the numerical results significantly. In conventional triaxial compression (CTC) tests, the specimens are wrapped by flexible membranes allowing to deform freely. To accurately model the boundary conditions of CTC, new flexible boundary algorithms for 2D and 3D DEM simulations are proposed. The new algorithms are computationally efficient and easy to implement. Moreover, both horizontal and vertical component of confining pressure are considered in the 2D and 3D algorithms, which can ensure that the directions of confining pressure are always perpendicular to the specimen surfaces. Furthermore, the boundaries are continuous and closed in the new algorithms, which can prevent the escape of particles from the specimens. The effectiveness of the proposed algorithms is validated by biaxial and triaxial simulations of granular materials. The results show that the algorithms allow the boundaries to deform non-uniformly on the premise of maintaining high control accuracy of confining pressure. Meanwhile, the influences of different lateral boundary conditions on the numerical results are discussed. It is indicated that the flexible boundary is more appropriate for the models with large strain or significant localization than rigid boundary.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.351-354
• /
• 2001

Undrained cyclic triaxial compression tests were performed on Saemangeum dredged sand to evaluate factors affecting liquefaction strength and liquefaction behaviour characteristics. The results of these tests show that cyclic liquefaction can occur not only very loose sand(Relative density is 30%) but also dense sand(Relative density is 70%). To evaluate effect of the over consolidation ratio on the liquefaction strength, a series of undrained cyclic triaxial compression test was peformed, and the result of this test showed that the liquefaction of this test showed that the liquefaction strength of Saemangeum dredged sand approximately increased to square root of over consolidation ratio in the range of O.C.R value of 1.0 to 4.0. In the anisotropically consolidated sample tests, the liquefaction strength is increased by increasing the effective consolidation ratio.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.455-465
• /
• 2008

In this study, the load distribution and deformation of rock-socketed drilled shafts subjected to axial load are investigated based on small scale model tests. In order to analyze the effects of major influencing factors of end bearing capacity, Hoek-cell triaxial tests were performed. From the test results, it was found that the initial slope of end bearing load transfer (q-w) curve was highly dependent on rock mass modulus and pile diameter, while the ultimate unit toe resistance ($q_{max}$) was influenced by rock mass modulus and the spacing of discontinuities. End bearing load transfer function of drilled shafts socketed in rock was proposed based on the Hoek-cell triaxial test results and the field loading tests which were performed on granite and gneiss in South Korea. Through the comparison with pile load tests, it is found that the load-transfer curve by the present study is in good agreement with the general trend observed by field loading tests, and thus represents a significant improvement in the prediction of load transfer of drilled shaft.

• Geomechanics and Engineering
• /
• 제23권4호
• /
• pp.301-311
• /
• 2020

In this study, shear strength behavior of fine-grained soils was investigated under unsaturated conditions. The samples in the unsaturated state were subjected to a net normal stress (σ-u_a) of 40 kPa and different matric suctions (u_a-u_w) of 50, 100 and 150 kPa. The matric suction values applied in the triaxial tests were selected according to the bubbling pressures determined from the SWC curves. The study was carried out on prepared re-constituted cylindrical samples by uniaxial consolidation of soil slurries. First, consolidated drained (CD) triaxial compression tests were performed on the saturated samples and the cohesion and angle of internal friction were determined. After that, drained triaxial compression tests under matric suctions were performed on the unsaturated samples. In order to obtain unsaturated test results, cohesion and internal friction angle values of saturated samples were used. The nonlinear surface representing the shear strength surface was approximated consisting of two planes (double planar surface). The reason for the nonlinear behavior of some soils is that the amount of sand content contained in it is relatively high and the bubbling pressure/permanent water content value is relatively low.

• 터널과지하공간
• /
• 제32권3호
• /
• pp.219-230
• /
• 2022

GREAT 셀은 실험실에서 심부지층의 열-수리-역학적 조건을 구현하기 위해 설계된 시험장비로서, 시료 길이방향 축을 중심으로 회전하는 측면의 가압장치를 이용하여 다축 응력장을 생성할 수 있고 균열이 포함된 시료에 대해 유체유동 실험이 가능하다. 본 연구에서는 GREAT 셀을 이용한 삼축압축시험을 수치 해석적으로 모사하고 시료 측면에 작용하는 구속압 조건에 따른 역학적 거동을 분석하였다. 균열이 없는 고분자 재질의 시료에 대한 삼축압축시험 사례를 수치모사하여 실험결과와 비교하였다. 수평 구속압의 균등 및 불균등 조건에서 시료 표면의 변형률(원주변형률)을 분석하였으며, 실험결과와 유사한 경향을 보이는 것으로 검토되었다. 추가로 균열이 포함된 가상의 시료모델을 구성하여 균열면의 마찰 특성 및 형상이 시료 변형에 미치는 영향을 조사하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.821-832
• /
• 2008

The hazard warning levels are necessary for the rational design and safety construction of underground space, as mountain and urban tunnel. Sakurai provided the hazard warning levels for assessing the stability of tunnels using the critical strain of rock mass, which is defined as a ratio between uni-axial compressive strength and the Young's modulus. The concept of critical strain guidelines is introduced in this study for the assessment of tunnel safety during excavation. Moreover, in this paper, the critical strain properties of sedimentary rock in Korea has investigated and analysed in detail by Lab. test, as the uniaxial and triaxial compression tests. Finally, critical strain properties of sedimentary rock on uniaxial and triaxial stress condition is discussed the relationship of failure strain values, uniaxial and triaxial compression strengths, confining pressure and Young's modulus.