• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.563-568
• /
• 2007

디젤 엔진의 배기가스 유량을 측정하기 삼각 분리 막대형 차압유량계를 개발하였다. 3 종류의 삼각 막대형 차압유량계를 제작하였고 실험 평가하였다. 삼각 막대형 외부형상이 유선형에 가까울수록 차압유량계에서의 상류부 와 하류부의 차압이 감소하는 경향을 나타내었다. 삼각막대형 차압유량계를 사용하여 고온 및 상온 조건에서 유량 검정을 하였다. 고온 조건에서의 유량계 검정을 위해 버너를 제작하였다. 삼각막대형 상류부 및 하류부 간의 차압과 질량 유량의 실험식을 구했다. 또한 실험식은 기체 온도에 의한 보정을 포함하고 있다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2007년도 추계학술대회 및 제23회 정기총회
• /
• pp.376-382
• /
• 2007

항로를 횡단하여 건설된 교량은 부근을 지나던 선박의 기관이나 조타기의 고장 또는 비상한 외력의 영향이나 인위적인 판단오류로 인하여 발생할 수 있는 선박과 교각의 충돌을 예방하고 불가피한 충돌의 경우에도 교량의 붕괴를 방지하는 대책을 마련하여야 한다. 충돌이나 간접 충격에 의하여 교량의 상판이 붕괴되는 경우 많은 인명의 손실과 교량으로 연결되는 간선도로의 장기간 폐쇄는 국가적인 재앙이 될 것이기 때문이다.

• Steel and Composite Structures
• /
• 제34권1호
• /
• pp.53-73
• /
• 2020

A novel all-steel miniature bar-type structural fuse (MBSF) with cold formed bolted connections is developed in this study, which consists of a central energy dissipation core cut from a smooth round bar, an external confining tube and nuts. Three types of cross sections for the central energy dissipation core, i.e., triple-cut, double-cut and single-cut cross sections, were studied. Totally 18 specimens were axially tested under either symmetric or asymmetric cyclic loading histories, where the parameters such as cut cross sectional area ratio, length of the yielding portion and cross sectional type were investigated. Numerical simulation of 2 representative specimens were also conducted. An analytical model to evaluate the bending failure at the elastic portion was proposed, and a design method to avoid this failure mode was also presented. The experimental results show that the proposed MBSFs exhibit satisfactory hysteretic performance under both the two cyclic loading histories. Average strain values of 8% and 4% are found to be respectively suitable for designing the new MBSFs as the ultimate strain under the symmetric and asymmetric cyclic loadings.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.204-210
• /
• 2010

The inner structure of the triangular separate bar (TSB) was improved to enhance the productivity of the TSB flow meter by simplifying the machining process for making the flow meter. The cross section of upstream and downstream pressure chamber in the TSB was changed from triangle to circle, which make it possible to substitute the wire cutting by drilling in the process of machining the pressure chamber. The flow rate characteristics of the flow meters was calibrated with a laminar flow meter. Six kinds of flow meters whose diameters of pressure tap for measuring pressure of both upsteam and downstream pressure chamber were different one another were made. The effects of the pressure tap diameter on the flow rate characteristics of the TSB flow meter was little. The mass flow rate characteristics of the flow meters with increasing a non-dimensional parameter which includes the gas temperature, exhaust gas pressure and differential pressure at the flow meters and atmospheric pressure shows nearly linear relationship with a correlation coefficient of R=0.998.

• 한국전자파학회논문지
• /
• 제16권9호
• /
• pp.893-902
• /
• 2005

단일 급전을 가진 안테나로서 이중 대역에서 원형 편파를 수신하기 위하여 막대형 슬롯을 가진 삼각 패치 안테나를 제안하였다. 이중 대역의 높은 주파수 대역과 낮은 주파수 대역에서의 공진 주파수비를 크게 하기 위하여 슬롯 구조를 막대형에서 H형으로 변형한 안테나를 또한 제안하였다. 막대형 슬롯의 3가지 설계 예를 검토하고, GPS(Global Positioning System)와 DMB(Digital Multimedia Broadcasting) 신호를 수신하기 위해 공진 주파수 비를 크게 할 수 있는 H형 슬롯의 안테나를 4가지 경우에 대하여 전산 모의 실험하여 특성을 검토하였다. 이들 중 요구되는 주파수비 특성을 보이는 경우에 대하여 $S_{11}$, 축비, 방사 패턴 등을 전산 모의 실험한 후 제작하여 전기적 특성을 측정하였다. 전산 모의 실험에서 축비와 최대 이득은 낮은 주파수 대역의 GPS주파수 1.575 GHz에서 각각 3.80 dB, 8.85 dBi의 결과를 보였으며, 높은 주파수 대역의 2.642 GHz에서 각각 2.02 dB, 8.60 dBi의 결과를 나타내었다. 구현된 안테나의 측정된 $S_{11}$ 값은 낮은 대역인 GPS 신호 주파수와 높은 주파수 대역인 DMB 신호 주파수 대역에서 각각 -12,43 dB와 -18.75 dB 이하의 특성을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.702_703
• /
• 2009

Electric Power Steering(EPS) system is superior to conventional Hydraulic Power Steering(HPS) system in aspect of fuel economy and environmental concerns. The EPS system consists of torque sensor, electric motor, ECU(Electric Control Unit), gears and etc. Among the elements, the torque sensor is one of the core technologies of which output signal is used for main input of EPS controller. Usually, the torque sensor has used torsion bar to transform torsion angle into torque. The torsion angle of both ends of a torsion bar is measured by a contact variable resistor. In this paper, the sensor is accurately analyzed using 3D finite element method and its characteristics with respect to four different shapes of the stator teeth are compared. The four shapes are rectangular, triangular, trapezoidal and circular type.

• Journal of Magnetics
• /
• 제17권4호
• /
• pp.285-290
• /
• 2012

Electric Power Steering (EPS) system is superior to conventional Hydraulic Power Steering (HPS) system in aspect of fuel economy and environmental concerns. The EPS system consists of torque sensor, electric motor, ECU (Electric Control Unit), gears and etc. Among the elements, the torque sensor is one of the core technologies of which output signal is used for main input of EPS controller. Usually, the torque sensor has used torsion bar to transform torsion angle into torque and needs linear characteristic in terms of flux variation with respect to rotation angle of permanent magnet. The torsion angle of both ends of a torsion bar is measured by a contact variable resistor. In this paper, the sensor is accurately analyzed using 3D finite element method and its characteristics with respect to four different shapes of the stator teeth are compared. The four shapes are rectangular, triangular, trapezoidal and circular type.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 춘계 학술대회논문집
• /
• pp.128-133
• /
• 2002

The heat transfer characteristics of a turbulent flow in a ribbed two-dimensional channel have been investigated numerically. The fully elliptic governing equations, coupled with a four-equation turbulence model, $\kappa-\omega-\bar{t^2}-\epsilon_t$, are solved by a finite volume method of SIMPLE type. Calculations have been carried out for three rib cross-sections : square, triangular, and semicircular, with various rib pitches and Reynolds numbers. The procedure appears to be satisfactory as the results for the square rib compare favorably with available experimental data and earlier calculation. The optimal rib pitch that yields the maximum heat transfer has been identified. It is also found that the square rib is most effective in enhancing the heat transfer. The semicircular rib, on the other hand, incurs the least amount of pressure drop but the improvement in heat transfer is substantially lower.