• Journal of Environmental Science International
• /
• v.12 no.8
• /
• pp.847-852
• /
• 2003

It was examined carefully that the bacterial die-off between Chlorella vulgaris and E. coli. W3110 was tested through adding TOC (total organic carbon) with the lab-scaled continuous river water flow system (CRWFS). Artificial synthetic wastewater was applied at two levels of organic carbon concentration; 1,335 mg/l in treatment type 1 and 267 mg/l in type 2. In both types, the population densities of Chlorella vulgaris were similar in a maximum 8.25 ${\times}$ 10$\^$6/ cells/ml (type 1) and 6.925 ${\times}$ 10$\^$6/ cells/ml (type 2). The maximum densities of E. coli. W3110 were 2.0 ${\times}$ 10$\^$8/ colony forming unit (CFU)/ml in type 1 and 3.9 ${\times}$ 10$\^$8/ CFU/ml in type 2. The densities increased for 11 days in type 1 and 4 days in type 2, then decreased rapidly till the 35th day, then slightly increased again. This trend was prominent in type 2. It implied that a wider range of nutrients was required in the growth of heterotrophic bacteria in type 2 than in type 1. We could not expect successful bacterial die-off if the wastewater retention time was not furnished sufficiently.

• Advances in concrete construction
• /
• v.5 no.5
• /
• pp.513-537
• /
• 2017

In this study, the fracture toughness $K_{IC}$ of high performance concrete (HPC) was investigated by conducting three-point bending tests on a total of 240 notched beams of $500mm{\times}100mm{\times}100mm$ subjected to heating temperatures up to $450^{\circ}C$ with exposure times up to 16 hours and various heating and cooling rates. For a heating rate of $3^{\circ}C/min$, $K_{IC}$ for the hot concrete sustained a monotonic decrease trend with the increasing heating temperature and exposure time, from $1.389MN/m^{1.5}$ at room temperature to $0.942MN/m^{1.5}$ at $450^{\circ}C$ for 4-hour exposure time, $0.906MN/m^{1.5}$ for 8-hour exposure time and $0.866MN/m^{1.5}$ for 16-hour exposure time. For the cold concrete, $K_{IC}$ sustained a two-stage decrease trend, dropping slowly with the heating temperature up to $150^{\circ}C$ and then rapidly down to $0.869MN/m^{1.5}$ at $450^{\circ}C$ for 4-hour exposure time, $0.812MN/m^{1.5}$ for 8-hour exposure time and $0.771MN/m^{1.5}$ for 16-hour exposure time. In general, the $K_{IC}$ values for the hot concrete up to $200^{\circ}C$ were larger than those for the cold concrete, and an inverse trend was observed thereafter. The increase in heating rate slightly decreased $K_{IC}$, and at $450^{\circ}C$ $K_{IC}$ decreased from $0.893MN/m^{1.5}$ for $1^{\circ}C/min$ to $0.839MN/m^{1.5}$ for $10^{\circ}C/min$ for the hot concrete and from $0.792MN/m^{1.5}$ for $1^{\circ}C/min$ to $0.743MN/m^{1.5}$ for $10^{\circ}C/min$ for the cold concrete after an exposure time of 16 hours. The increase in cooling rate also slightly decreased $K_{IC}$, and at $450^{\circ}C$ $K_{IC}$ decreased from $0.771MN/m^{1.5}$ for slow cooling to $0.739MN/m^{1.5}$ for fast cooling after an exposure time of 16 hours. The fracture energy-based fracture toughness $K_{IC}$' was also assessed, and similar decrease trends with the heating temperature and exposure time existed for both hot and cold concretes. The relationships of two fracture toughness parameters with the weight loss and the modulus of rapture were also evaluated.

• Archives of design research
• /
• v.13 no.4
• /
• pp.95-103
• /
• 2000

In order to satisfy customers' desire that is becoming more diverse, and to create the unique character of a product in the fast changing social structure and living environment, today's designers have to make efforts to provide new ideas continuously. In the twentieth century, the development of design in various aspects could be possible through an epoch-making progress of technology and industrialization, and thus the meaning and style of design has changed differently according to the current of the times. The retro design, which borrows the designs and styles which were popular in the past and recreates the design of modern meaning and concept, is widely applied now and in the spotlight as a latest design trend. This phenomenon of revival style appears as an image that makes us recollect the past in various fields while being recognized as an another value of new sense. Considered from the history of style changes for the past 100 years, the automobile design, the most representative in product design fields, has gradually changed in its types according to continuous historical, social, and cultural changes and technological progress, while a variety of designs have been continuously presented. The recent current of automobile styles, according to the rapid progress of advanced scientific technology, shows the fast and various changes and the retro style is becoming a new trend arousing people's interests and reintroducing the past designs. The revival trend in automobile designs is expected to stimulate human sensitivity and restore humanity on a different level before the trend, and also expected to be recreated as a new design trend in modern sense, connecting us with the past culture and expanding the realms of future designs.

• Journal of East-West Nursing Research
• /
• v.8 no.1
• /
• pp.135-146
• /
• 2003

Moxibustion plays an important role not only in the medical service, but also in the health care of Korea. So this study attempted to review of moxibustion and analyze of domestic study trend. And it also intends to examine the usefulness of moxibustion treatment in Korean nursing intervention. "Donguibogam" is famous for the most comprehensive medical book in ancient Korea, indicates that moxibustion makes up a large part of it and that its contents were composed of material, size, time, caring of one's health, indication, operational procedure, contraindication in the documented in the 25 reference books. Also, It confirms that it has been widely used since old times. Especially, it seems to be a great help to researchers because its content lay a theoretical foundation. From the literature, we identified that moxibustion was most widely using method for health promotion and an efficacious cure for a disease. I searched and investigated the journals and dissertations supplied by KERIS and RICH with the key word "moxibustion". Of 10 articles with moxibustion intervention, the trend of domestic studies shows, that of an area relating to nursing was 5. Therefore, moxibustion intervention steadily increases in frequency in nursing academic circles year by year. But there is no distinction between hand moxibustion and moxibustion. According to the above results, we need to develop moxibustion learning program and well designed experimental study with moxibustion for Korean Nursing intervention.

• Journal of Convergence for Information Technology
• /
• v.7 no.1
• /
• pp.43-48
• /
• 2017

The design trend is changed with the times. The design trend of recent 21 century is eco-friendly design. The optical illusion design is a new trend of digital convergence era. In this study, optical illusion patterns were designed for furniture with eco-friendly UV-curable resin. The micro-patterns of optical illusion design were fabricated with the micro-mold which was mastered using a semiconductor micro-fabrication process by photolithography technique. The micro-patterns of optical illusion design were manufactured on PET film with a roll-to-roll process using a UV-curable resin. The manufactured PET film of optical illusion micro-pattern exhibits hologram effect, optical illusion effect, and texture of metal with the backside digital printing of metal tone. The furniture of new design concept so-called emotional furniture was manufactured with the various optical illusion design patterns. The optical illusion design patterns by UV mold prospect a new trend of interior design materials.

• Archives of design research
• /
• no.16
• /
• pp.53-63
• /
• 1996

With the high level economic growth and plentiful stabl izing our I iving, our car has become indispensable necessi ties of life which was the symbol of our riches. And yet, on this changes of the times, we welcomed MY CAR epoch with an explosive increase of its demand. However, compared wi th this trend, we feel actually that our level of car development technique is beyond our capaci ty to satisfying our personal fancy I ike advanced nations for buying car in quantity and quality side. On this study, I made car body color as my studing topic which was few concerning to research. I analyzed and investigated[surveyed] the state of envi ronmental facts and recent Korean passenger- car body color trend. After this work, I found out enough to solve the problem on developing car body color. And I suggest the problem solving materials as a reference to meet with the modern's fancy in the development processing of passenger car with systematicaly and effectively.

• Genes and Genomics
• /
• v.40 no.11
• /
• pp.1127-1136
• /
• 2018

The Greater Sudbury Region has been known as one of the most ecologically disturbed areas in Canada for the past century. Plant adaptation to environmental stressors often results in modifications in gene expression at the transcriptional level. The main objective of the present study was to compare the expression of genes associated with nickel resistance in Acer rubrum and Populus tremuloides growing in areas contaminated and uncontaminated with metals. Primers targeting Nramps4, Nas 3, At2G, MRP4 and alpha-tubulin genes were used to amplify cDNA of both species. The expression of the At2G gene, was $2{\times}$ and $9{\times}$ higher in P. tremuloides than in A. rubrum for St. Charles (uncontaminated site) and Kelly Lake (metal contaminated site), respectively. There was a much smaller difference between the two species for the Nramps 4 gene as its expression was $2.5{\times}$ and $3{\times}$ higher in P. tremuloides compared to A. rubrum from St. Charles and Kelly Lake, respectively. The same trend was observed for the MRP4 gene whose expression was $2{\times}$ and $14{\times}$ higher in P. tremuloides than in A. rubrum from St. Charles and Kelly Lake, respectively. For the Nas 3 gene, the expression was similar in both sites. This gene was upregulated $11{\times}$ and $10{\times}$ in P. tremuloides compared to A. rubrum in samples from St. Charles and Kelly Lake, respectively. In general, no significant difference was observed between the metal contaminated and uncontaminated sites for gene expression. In depth analysis revealed that AT2G and MRP4 genes were significantly down regulated in A. rubrum from the metal contaminated sites compared to those from uncontaminated areas, but environmental factors driving this differential gene expression couldn't be established.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.160-173
• /
• 2011

Increased internet use under a ubiquitous environment may be called as a great human information space revolution followed by Industrial Revolution. This revolution is exerting its significant influence over all the industry as a whole with speed faster than that of any other times. Along with this trend, if furniture design field that leads living culture should fail to jump on this main stream without noticing it, it may be reduced to a unpopular field some day without any sign of recovery. Under this background, this study is intended to recognize a goal aiming at understanding our rapidly changing living environment and leading our way positively. Currently, our surrounding living environment is immersed in computers here and there and Mark Weiser once defined a system that moves in advance before an action as ubiquitous computing and in this respect, I am going to observe a detailed transformation process of space. First nature of the space may be defined as atoms, a physical space equivalent to a spatial element and Bits space that is untouchable is usually called as 2nd space and a combination of atoms and Bits is an intelligent space - 3rd space - that can be intelligible without touching it and finally, this space is called as a ubiquitous space. This spatial transformation is developed by several changes of living environment and we may call it as living trend or interior design trend. Transformation in terms of social perspective, space structural perspective and digital technique perspective may be enumerated. These transformations were surveyed based on its contents being implemented at a future housing exhibition hosted by 5 construction companies along with fusion of information furniture and furniture depending on each housing space. In conclusion, it could be realized that most of the companies were decorating future space by implementing ubiquitous environment as a success factor of future housing market. It may be meaningful to note once again that under an interior environment, a fusion of furniture and information furniture is required considering interior trend elements.

• Journal for History of Mathematics
• /
• v.17 no.2
• /
• pp.1-8
• /
• 2004

In this paper we try to research in the influences which the concepts of infinity have made to our life, and how they have led the trend of the times through studying on the process of changes of concepts of infinity. Also we intend to make a research in how the shift of paradigm on the view of life have been changing under the circumstances in which the concepts of infinity have been accepted as an actual meaning.

• Journal of the Korea Furniture Society
• /
• v.23 no.2
• /
• pp.122-129
• /
• 2012

This article was intended as fundamental materials to recognize the current status of furniture hard ware in Korean market and to fix the identity of Korean furniture, by investigating and comparing the furniture hard ware used in the Joseon era and in modern times by type, function, shape and material. The analysis of furniture hard ware of the Joseon era and modern times from the view of functional aspects was oriented to the hard ware necessary to open and close the door & drawer on one side, and to that being attached to the main body of furniture not to scratch the wood by another wood on the other side, and from this the following conclusion was drawn. First of all, "Gwangdoojung" - a kind of spike- and metal decoration on the edge of the furniture disappeared, while the function-oriented hard wares have been diversified in modern times, from the perspective of the change of kinds. Second, the functional aspect of the furniture hard ware was emphasized in modern times than the Joseon era. In other words, the hard wares of the Joseon era came into view due to their strong appeal to decoration, whereas those of modern times were mostly hidden or moderated, keeping the function substantially. Third, the hard wares from the Joseon era were shown in concrete and detailed shape motivated by natural objects and furthermore even gloriously, but the modern hard wares are simple & basic geometry, from a formative point of view. Fourth, the material aspects present that the Joseon era's hard ware was mainly cast iron, whereas that of modern times shows the diversification from metal to even plastic. Finally, the recent trend in naming of the hard wares is the words of foreign origin. This resulted from that the foreign names of hard wares are valid also after import process in Korean market, so the domestic development of hard ware as the essential factor for the furniture design is urgently necessary to establish the identity of Korean modern furniture.