• Proceedings of the Korean Geotechical Society Conference
• /
• 1997.03a
• /
• pp.103-112
• /
• 1997

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.825-835
• /
• 2019

When the tunnel is designed, the ground is classified into several grades and the corresponding support system is applied according to the support pattern table. However, a simple pattern application based on rock grade does not take into account the longitudinal stress transitions occurring at rock grade boundaries. In this study, three-dimensional numerical analysis was performed to estimate the stress change in the longitudinal rock grade change of NATM tunnel, and the influence zone of load transfer was investigated using the influence line and trend line. As a result, the downward change of rock grade in the direction of tunnel excavation occurs in the range of 0.35~0.7D from low-strength rock to high-strength rock around the grade change boundary. It is necessary to apply a downward pattern of about 1.0D to the safety direction in consideration of the influence range of 0.35D to 0.7D.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.3
• /
• pp.235-245
• /
• 2002

The purpose of this study is to figure out the tendency of tunnel convergence during excavation and to present a methodology for the prediction of a fault zone ahead of a tunnel face by analyzing three dimensional displacements in various ways. 3-D numerical analysis was performed to investigate changes of tunnel convergence vectors near a fault zone and to propose a flow chart for predicting fault zones. Results of the site investigation and results of trend line analysis of in-situ data were compared to verify the usefulness of a trend line analysis. It is concluded that the orientation of faults can be predicted by using stereonets and the direction of initial stresses can be predicted from the arm length of a displacement vector as a tunnel approaches fault zones. The results of the trend line analysis coincided with those of the site investigation, and a methodology for the prediction of a fault zone was proposed.

• Journal of the Korean Society of Costume
• /
• v.66 no.3
• /
• pp.121-134
• /
• 2016

The purpose of this study is to explore the effectiveness of marketing strategies of children's clothing line for global SPA brands among Korean consumers. The following factors were evaluated as the dependent variables: benefits sought, store attributes, and brand loyalty. We employed a survey method to test our research questions. The subjects of our survey were mothers with preschool kids between 2 and 7 years who had purchase experiences of children's clothing lines of global SPA brands. The major findings are as follows: First, among the three factors of benefits sought ('trend'/'brand value'/'practicality'), the 'trend' factor only positively impacted the 'product' factor, which is part of the store attributes. 'Practicality' and 'trend' factors had a positive effect on the 'service' factor of store attributes. However, all three factors of benefits sought had no impact on the 'store' factor, and 'practicality' and 'trend' factors had positive effects on the price factor of store attributes. Second, 'practicality' and 'trend' factors among the three factors of benefits sought, had positive effects on brand loyalty. Third, the 'product', 'price', 'store', and 'service' factors had a significant positive effect on brand loyalty in decreasing order. Suggestions from our results for national SPA brands are as follows: National SPA children's clothing lines should focus more on unique designs and unique marketing strategies better reflecting Korean consumers' interest and needs in competing with their global counterparts.

• Geomechanics and Engineering
• /
• v.15 no.2
• /
• pp.769-774
• /
• 2018

The growth of cities requires the construction of new tunnels close to the existing ones. Prediction and control of ground movement around the tunnel are important especially in urban area. The ground respond due to EPB (Earth Pressure Balance) pressure are investigated using the finite element method by ABAQUS in intersection of the triplet tunnels (Line 2, 3 and 4) of Mashhad Urban Railway in Iran. Special attention is paid to the effect of EPB pressure on the tunnel face displacement. The results of the analysis show that in EPB tunneling, surface settlement and face displacement is related to EPB pressure. Moreover, it is found that tunnel construction sequence is a great effect in face displacement value. For this study, this value in Line 4 where is excavated after line 3, is smaller than that line. In addition, the trend of the displacement curves are changed with the depth for all lines where is located in above and below, close to and above the centerline tunnel face for Line 2, 3 and 4, respectively. It is concluded that: (i) the surface settlement decreases with increasing EPB pressure on the tunnel face; (ii) at a constant EPB pressure, the tunnel face displacement values increase with depth. In addition, this is depended on the tunneling sequence; (iii) the trend of the displacement curves change with the depth.

• Journal of the Korean Society for Railway
• /
• v.8 no.5
• /
• pp.398-404
• /
• 2005

In this paper, we introduce the on-line test of the current collection characteristics for HSR 350x(Korea High Speed Train project) that have been performed in the Kyoung-bu high-speed line since 2002. Through the analysis of measured data during on-line test, the variation trend of contact force between pantograph and contact wire of catenary according to the span type, the track conditions and driving patterns is reviewed. In order to analyze the variation trend of contact force, we have checked the span type of catenary in KP 24 - 125 out of Kyoung-bu high speed line and obtained the statistical processing result per each span type. This study shows that the track conditions do not affect on the dynamic performance between pantograph and contact wire catenary, and the span type and the driving pattern are important factors in determining the good interaction between them.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1025-1027
• /
• 1999

Recently, many researches on a diagnosis of stator winding insulation of large generators are reported. They mostly utilize a trend analysis of Partial Discharge (PD). In this paper, a novel on-line monitoring system for an insulation diagnosis is proposed. This system obtains the parameters such as Maximum Partial Discharge Magnitude (QM), Normalized Quantity Number (NQN) and Dynamic Stagnation Voltage (DSV) by continuous on-line monitoring of winding insulation. It is capable of diagnosing the insulation condition by analyzing the trend of PD and utilizing the database built by the system.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.403-411
• /
• 2022

Appearance management is evolving as a means of self-expression or as a way of expressing one's individuality. In particular, hairstyle is the most important part of a person's appearance and accounts for 70% of the appearance. Improving people's appearance by changing their hairstyle gives them confidence. Among them, the fringe hair style plays an important role in determining the first impression and reflects the trend. Fringe is shorter and simpler than general hair treatment, but even these small treatments have the effect of changing the impression, so women are trying to transform into a fringe hair style. A previous study was conducted on four lines classified: round, heart, square, and triangular. In this study, we added them to define 5 hairlines and created them by combining each hairline. that have been produced 5 fringe hair styles that suit the shape of the face. It is expected that the results of this study will be used as educational materials for hair line and fringe hair styles in the field, contributing to the beauty industry.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.260-264
• /
• 2005

This paper gives a basic information of live line maintenance technique of UHV T/L and introduce a technical background and trends of domestic and abroad. The importance of live line maintenance technology getting increased because the change of power system environment and maintenance conditions in korea. this paper explain the present state of the development of live line maintenance technique in korea and show a difference with advanced countries.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.15-22
• /
• 2007