• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.325-329
• /
• 1992

The development of automatic production system have required intelligent diagnostic and monitoring function to repair system failure and reduce production loss by the failure. In order to perform accurate functions of intelligent system, inference about total system failure and fault analysis due to each mechanical component failures are required. Also the solution about repair and maintenance can be suggested from these analysis results. Generally, bearing is a essential mechanical component in the machinery. The bearing failure is caused by lubricant system failure, metallurgical defficiency, mechanical condition(vibration overloading misalignment), environmental effect. This study described roller bearing fault train due to stress variation and metallurgical defficiency from lubricant failure by using FTA.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.110-123
• /
• 1994

The development of automatic production systems have required inteligent diagnostic and monitoring function to repair system failure and reduce production loss by the failure. In order to perform accurate functions of intelligent system, inferencing about total system failure and fault analysis due to each mechanical component failures are required. Also the solution about repair and maintenance can be suggested from these analysis results. As an essential component of mechanical system, a bearing system is investigated to define the failure behavior. The bearing failure is caused by lubricant system failure, metallurgical defficiency, mechanical condition(vibration, overloading, misalignment) and environmental effect. This study described roller bearing fault train due to stress variation and metallurgical defficiency from lubricant failure by using FTA.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.553-554
• /
• 2015

This paper presents the selection method of Minimal Cut Sets(MCS) for substation reliability evaluation. We used the Quality solution in order to model the FT for the substation equipment. Quantitative analysis is performed to estimate the probability of top event occurrence and unreliability of the substation component. In this result, it means that reliability indices which can be predict get electricity services and better maintenance in substation management.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.385-388
• /
• 2005

최근 소프트웨어의 비약적인 발전은 사람들의 일상생활에서부터 복잡한 산업현장까지 점점 더 많은 영향을 주고 있다. 특히, 기업들의 이익과 밀접하게 관련된 생산 산업 현장에서 다양한 보전활동 중에서 예지보전은 설비에 대한 전문적 지식을 요구하기 때문에 기업의 입장에서 전문가 인력을 보유하고 있어야 하는 부담을 가지고 있다. 설비의 보전을 위해 전문가들이 행하던 분석 및 해결의 과정을 컴퓨터를 이용하여 처리하는 전문가시스템은 전문가 인력을 대체할 중요한 수단으로 생각되고 있다. 이에, 본 논문에서는 이러한 문제점에 대한 해결책으로 설비진단 전문가 인력을 대체할 수 있는 결정트리를 이용한 예지보전 전문가 시스템을 제안하고자 한다.

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.6-14
• /
• 2006

The development of automatic production systems have required intelligent diagnostic and monitoring functions to overcome system failure and reduce production loss by the failure. In order to perform accurate operations of the intelligent system, implication about total system failure and fault analysis due to each mechanical component failures are required. Also solutions for repair and maintenance can be suggested from these analysis results. As an essential component of a mechanical system, a bearing system is investigated to define the failure behavior. The bearing failure is caused by lubricant system failure, metallurgical deficiency, mechanical condition(vibration, overloading, misalignment) and environmental effects. This study described slab transfer equipment fault train due to stress variation and metallurgical deficiency from lubricant failure by using FTA.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.643-646
• /
• 2005

The paper discusses the main problems in induction motor diagnosis by motor current and vibration signals, possible faults and effects produced by these faults in the signal spectrums. Decision Tree is introduced as a tool to diagnose the motor status, this expert system is implemented to detect the incipient defects, supervise and predict them, and plan the maintenance of the motor.

• Journal of architectural history
• /
• v.24 no.5
• /
• pp.41-48
• /
• 2015

Quantitative analysis of termites damage is important in terms of conservation and maintenance of wooden cultural heritage buildings, because termites makes cavities and decreases the section area of wooden structural members. The purpose of this study is to forecast the range and spread of termites damage in the wooden structural members by using ultrasonic pulse velocity method. Ultrasonic pulse velocity has been used as one of non-destructive test to analysis the internal defect by using difference velocity between medium material and cavity. This method would be effective to analysis termites damages. From the result of the ultrasonic velocity test, the loss rate of area effected by termites damage had a strong correlation with ultrasonic velocity. And it is possible to predict the loss rate of area from by termites damage by using regression equation in the case of structural member of fine tree.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1869-1880
• /
• 2009

Distribution line fault has been reduced gradually by the efforts on improving the quality of electrical materials and distribution system maintenance. However faults caused by medium voltage customers have been increased gradually even though we have done many efforts. The problem is that we don't know which customer will cause the fault. This paper presents the concept to find these customers using data mining techniques, which is based on accumulated fault records of medium voltage customers in the past. It also suggests the prediction model construction of medium voltage customers causing distribution line fault and methods to enhance the reliability of distribution system. We expect that we can effectively reduce faults resulted from medium voltage customers, which is 30% of total faults.

• Journal of the Korean Society of Safety
• /
• v.11 no.2
• /
• pp.52-59
• /
• 1996

This paper presents a new approach for assessing the dynamic reliability in a complex system such as a nuclear power plant. The method is applied to a dynamic analysis of the potential accident sequences which may occur during mid-loop operation. Mid-loop operation is defined as an operation to make RCS water level below the top of the flow area of the hot legs at the junction with the reactor vessel for repairs and maintenance of steam generators and reactor coolant pumps for a specific time. The Idea behind this approach consists of both the use of the concept of the performance achievement/requirement correlation and of a dynamic event tree generation method. The assessment of the system reliability depends on the determination of both the required performance distribution and the achieved performance distribution. The quantified correlation between requirement and achievement represents a comparison between two competing variables. It is demonstrated that this method is easily applicable and flexible in that it can be applied to any kind of dynamic reliability problem.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.04a
• /
• pp.244-247
• /
• 2000

이동 통신 기술의 발전으로, 이동컴퓨팅 환경에서의 데이타 서비스에 대한 수요가 증가하고 있다. 이동 호스트 내에 캐쉬가 존재할 경우, 대역폭의 절약 및 빠른 응답시간을 제공할 수 있지만, 캐쉬 일관성을 유지해야하는 부담이 생긴다. 한 셀 내에 존재하는 수 많은 이동 호스트들의 캐쉬 일관성 유지를 위해서 서버(MSS)가 캐쉬 무효화 보고를 일정시간마다 주기적으로 방송하는 방법은 효과적일 수 있다. 기존에 제시된 무효화 보고에서는 갱신된 데이타의 식별자가 사용되지만, 좀 더 적은 양의 대역폭을 소모하는 효율적인 무효화 보고가 되기 위해서는 데이타들을 그룹핑할 수 있는 방안이 연구되어야 한다. 본 논문에서는 서버의 데이타베이스를 데이타의 식별자 값을 기준으로 여러 구역으로 나누었을 때, 데이타의 갱신이 데이타베이스 내 인근 구역에서 많이 발생할 경우, 이진 트리를 기반으로 하여 효율적인 무효화 보고를 생성하는 방법을 제안하고 그 성능을 평가한다.