• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.6
• /
• pp.258-263
• /
• 2021

ZnO varistor is a semiconductor device which can serve to protect the circuit from surge voltage because its non-linear I-V characteristics by controlling the microstructure of grain and grain boundaries. In order to obtain desired electrical properties, it is important to control microstructure evolution during the sintering process. In this research, we defined a dataset composed of process conditions of sintering and relative permittivity of sintered body, and collected experimental dataset with DOE. Meta-models can predict permittivity were developed by learning the collected experimental dataset on various machine learning algorithms. By utilizing the meta-model, we can derive optimized sintering conditions that could show the maximum permittivity from the numerical-based HMA (Hybrid Metaheuristic Algorithm) optimization algorithm. It is possible to search the optimal process conditions with minimum number of experiments if meta-model-based optimization is applied to ceramic processing.

• Journal of The Geomorphological Association of Korea
• /
• v.28 no.1
• /
• pp.51-66
• /
• 2021

This study shows that coastal sand dunes are negatively affected by coastal forests. In South Korea, planting pine trees on the dunes has been carried out to stabilize the dune landscapes and protect residential areas from coastal disasters since the 20th century. However, this strategy could reduce the resilience of dunes. In this study, we selected three monitoring sites with automated weather stations to compare the geomorphological and environmental characteristics between tree-covered and grass-covered dunes at Sohwang-ri, Boryeong-si, Chungnam Province for three years. In addition, we monitored the rates of erosion and deposition using eight pins along the dune crests. We found that the forest affected both wind velocity and direction, resulting in decreased blown sand supply to the dunes in front of the forest. The velocity of the strong winds faster than 5 m/s diminished to 10%-30% of the control sites, and the direction of northwesterly wind were skewed to the north by about 6°. Sand deposition occurred at about 15-20 m away from the pine forest and the amount was only 1/10 of the deposition within the grass-covered dunes. This study suggests that planting trees in coastal dunes is an undesirable strategy with negative impacts on the landscape management.

• Korean Journal of Environment and Ecology
• /
• v.34 no.2
• /
• pp.99-105
• /
• 2020

Migratory birds use a variety of breeding and wintering sites, and it is particularly important to understand more information on breeding and feeding sites for the conservation and management of endangered species. Black-faced spoonbills (Platalea minor) are an international endangered species distributed in East Asia. The majority of black-faced spoonbills breed on uninhabited islets off the west coast of the Korean Peninsula during the breeding season, and they are distributed in East Asia such as Taiwan, Hong Kong, southern China, Japan, and Jeju island during the winter season. In this study, we used a wild animal location tracking system to analyze and compare home ranges of three black-faced spoonbills spending the post-fledging stage in Gujido islet in Incheon and Chilsando islet in Yeonggwang each in 2015. The tree black-faced spoonbills in Guji islet showed a home range in coastal areas in Hwanghaenam-do and Gangneung-gun. The home range size (mean±SD) was estimated to be 425.49±116.95 ㎢ using 100% MCP, 43.61±18.51 ㎢ using KDE 95%, and 7.46±3.68 ㎢using KDE 50%. The tree black-faced spoonbills in Chilsando islet showed a home range in the Baeksu tidal flat and the Buan Saemangeum area with a size of 99.38±55.29 ㎢ using 100% MCP, 19.87±6.05 ㎢ using KDE 95%, and 1.16±0.53 ㎢ using KDE 50%. The figured indicated that the tree black-faced spoonbills breeding in Gujido islet had a wider home range than those breeding in Chilsando islet. During the post-fledging stage, the home ranges of black-faced spoonbills were mostly breeding in mudflats. Therefore, it is necessary to minimize human intervention, such as the construction of roads and structures and the human access, to protect the habitats during the period.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.4
• /
• pp.70-82
• /
• 2007

Aiming at nature's early restoring needs to select plant species harmonizing with surrounding environment that fits to restoring goal of ultimately aiming at woody plants dominant vegetation that protect and stabilize surface parts of bared slopes. And it is important to make it assimilated with surrounding natural vegetation by differentiating planning of seed mixtures. Natural Ecological Restoring Construction Methods (JSB Method) was developed to increase the effect of landscape change according to seasons not to simple hydro-seeding by reducing rate of foreign grasses while raising rate of wild flower using. It was considered that using wild flowers that bloom on each season solved the problems of slope landscapes that looks artificial and uninteresting. After researching environmental condition of the slopes, JSB Method has shown that, as of wet-type method, soil is relatively soft and the difference of thickness of plant base soil media affects on the difference of soil hardness. In case of soil hardness of 8.8~17mm, there's dangerousness of slope's collapsing, but it has shown that growth of plant was favorable. For the acidity of soil, most of them are in the type of neutralized soil of more than pH 6. And after analyzing the degree of woody plants dominance, it had shown that lower part was occupied with wild flowers and other herbaceous species like China pin, golden phesant mum, pitcher plant, and middle and upper part was occupied with woody plants like silk-tree, sumac forming multi-layer structure. It can be concluded that the restoration objects of the woody plant vegetation on the roadside slopes can be accomplished successfully by Natural Ecological Restoring Construction Method (JSB method).

• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.524-531
• /
• 1996

The objective of this study was to determine the important factors affecting the early natural regeneration of Pinus densiflora S. et Z. Seed germination, survival and height growth of the pine seedlings were examined at four experimental plots of P. densiflora forests including forest roadside. Plots I and III were thinned in 1992, plot II was treated with hexazinone in 1993 after seed tree method was applied in 1982 and 1989. Seedlings emerged after thinning and the rate of their emergence depended on forest floor conditions. Seedling survival was related with light conditions, herbaceous vegetation, and degrees of rainfall. More seedlings emerged in forest hauling roads than within the forest because soil scarification due to logging provided better conditions for seed germination and seedling growth. Seed supply was enough, but germination rate was very low in the forest compared with that in the greenhouse because micro-environments such as organic layer and herbaceous plant acted as limiting factors. Weed control was needed for 4 to 5 years until seedlings grew upto about 50cm in height which was similar to that of herbaceous plants. But 10-40% coverage of herbaceous vegetation was needed to protect small seedlings from heavy rain. Forest works such as thinning and logging, over 40% of light were important factors to help the pine regeneration. However, over 70% coverage of herbaceous vegetation, and heavy rain inhibited rather survival and growth of pine seedlings.

• Journal of Bio-Environment Control
• /
• v.23 no.1
• /
• pp.26-30
• /
• 2014

Purpose of this study was a development of a sprayer arm auto control system that could be operated according to distance from pear trees for automation of pest control. Auto control system included two parts, hardware and software. First, controller was made with an MCU and relay switches. Two types of ultra-sonic sensors were installed to measure distance from pear trees: one on/off type that detect up to 3 m, and the other continuous type providing 0~5 V output corresponding to distance of 0~3 m. Second, an auto control algorithm was developed to control. Each spraying arm was controlled according to the sensor-based distance from the pear trees. And it could dodge obstacles to protect itself. Max and min signal values were eliminated, when five sensor signals was collected, and then signals were averaged to reduce sensor's noises. According to results of field experiment, auto control test result was better than non auto control test result. Spraying rates were 69.25% (left line) and 98.09% (right line) under non auto control mode, because pear trees were not planted uniformly. But, auto control test's results were 92.66% (left line) and 94.64% (right line). Spraying rate was increased by maintaining distance from tree.

• The Journal of Information Systems
• /
• v.27 no.1
• /
• pp.171-191
• /
• 2018

Purpose Corporate technology leakage is not only monetary loss, but also has a negative impact on the corporate image and further deteriorates sustainable growth. In particular, since SMEs are highly dependent on core technologies compared to large corporations, loss of technology leakage threatens corporate survival. Therefore, it is important for SMEs to "prevent and protect technology leakage". With the recent development of data analysis technology and the opening of public data, it has become possible to discover and proactively detect companies with a high probability of technology leakage based on actual company data. In this study, we try to construct profiles of enterprises with and without technology leakage experience through profiling analysis using data mining techniques. Furthermore, based on this, we propose a classification model that distinguishes companies that are likely to leak technology. Design/methodology/approach This study tries to develop the empirical model for prevention and protection of technology leakage through profiling method which analyzes each SME from the viewpoint of individual. Based on the previous research, we tried to classify many characteristics of SMEs into six categories and to identify the factors influencing the technology leakage of SMEs from the enterprise point of view. Specifically, we divided the 29 SME characteristics into the following six categories: 'firm characteristics', 'organizational characteristics', 'technical characteristics', 'relational characteristics', 'financial characteristics', and 'enterprise core competencies'. Each characteristic was extracted from the questionnaire data of 'Survey of Small and Medium Enterprises Technology' carried out annually by the Government of the Republic of Korea. Since the number of SMEs with experience of technology leakage in questionnaire data was significantly smaller than the other, we made a 1: 1 correspondence with each sample through mixed sampling. We conducted profiling of companies with and without technology leakage experience using decision-tree technique for research data, and derived meaningful variables that can distinguish the two. Then, empirical model for prevention and protection of technology leakage was developed through discriminant analysis and logistic regression analysis. Findings Profiling analysis shows that technology novelty, enterprise technology group, number of intellectual property registrations, product life cycle, technology development infrastructure level(absence of dedicated organization), enterprise core competency(design) and enterprise core competency(process design) help us find SME's technology leakage. We developed the two empirical model for prevention and protection of technology leakage in SMEs using discriminant analysis and logistic regression analysis, and each hit ratio is 65%(discriminant analysis) and 67%(logistic regression analysis).

• Journal of Environmental Impact Assessment
• /
• v.24 no.5
• /
• pp.532-548
• /
• 2015

The winter ecology of individual yellow-throated martens(Martes flavigula) intemperate region of Korea were studied through snow-tracking. The study was performed across 3 winter seasons, from January 2011 to February 2013. Total distance of 49.8km was snow tracked (comprising 13 snow-tracking routes) to determine winter foraging habits, general behavior and movement paths of solitary and small groups (1-6 individuals; $mean=2.9{\pm}1.6$) of yellow-throated martens. The martens in the current study were omnivorous, with their winter diet including 9 animal and 5 plant species. Yellow-throated martens searched for food near and under the fallen logs and branches, root plates of fallen trees, around the roots of growing trees, and in small holes in the ground. They also climbed trees to search inside the tree holes and vacant bird nests. Foraging activity was estimated to occur at a frequency of 1.20 times/km, while territory marking occurred 1.42 times/km on average. Of the 60 documented foraging activities we observed, 17 were successful (28.3%). Moving activity and territory marking mainly occurred along ridges, whereas foraging activity was recorded in valleys, slopes, and forest edges. To protect the habitat of this species, the entire forest should be preserved, including the valleys, slopes, and even forest edges as well as main ridges.

• Journal of Environmental Impact Assessment
• /
• v.25 no.3
• /
• pp.190-208
• /
• 2016

This study was carried out to understand the spatial distribution and conservation, restoration plan for vegetation in the Hwaeom wetland protected area. Total 29 phytosociological releves consisted of 117 plant species (unidentified species contained) was made during field studies conducted at 2008 and 2013 applying Braun-Branquet method. The collected vegetations were arranged 8 plant communities and thus divided hydric types (Drosera rotundifolia-Eleocharis congesta community, Carex forficula-Molinia japonica community) and xeric types (Miscanthus sinensis community, Rhododendron yedoense var. poukhanense community, Tripterygium regelii community, Carex gifuensis-Quercus mongolica community) under moisture conditions. The hydric types growing in hydric conditions distributed along hollowed out ground or the water channel that have a key qualification to protect. In the wetland protected area, the hydric vegetation types were mostly covered about 3.8% and the xeric types dominating by Miscanthus sinensis were most wildly distributed about 51.5%. Various woody plant species invaded the place. In 2008, invasion plants observed with total 14 species - 8 tree species (227 individual), 6 shrub species (51 individual) and alders (Aluns japonica) found in 2013. We suggested finding out that the sustainable conservation and management in Hwaeom wetland should be setting up plan focused on activity and variability such as continuous monitoring (changing vegetation types, spatial distribution, invasion plants) and zonation management (core zone, buffer zone, transition zone).

• Research in Plant Disease
• /
• v.18 no.2
• /
• pp.109-116
• /
• 2012

A bacterial strain antagonistic to some fungal phytopathogens was isolated from the stem of a Persimmon tree in Yeongam, Korea. This bacterium was identified as Bacillus subtilis by 16S rRNA gene sequencing and designated as B. subtilis GDYA-1. In in vivo experiment, the fermentation broth exhibited antifungal activities against Magnaporthe oryzae on rice plants, Phytophthora infestans on tomato plants, and Puccinia recondita on wheat plants. We isolated one antifungal compound and its chemical structure was determined by mass and $^1H$-NMR spectral data. The antifungal substance was identified as benzoic acid. It inhibited mycelial growth of M. oryzae, Rhizoctonia solani, Sclerotinia sclerotiorum, and P. capsici with minimum inhibition concentration (MIC) values, ranging from 62.5 to 125 ${\mu}g/ml$. Moreover, the substance effectively suppressed Phytophthora blight of red pepper caused by P. capsici in a pot experiment. To the author's knowledge, this is the first report on the antifungal activity of benzoic acid against phytopathogenic fungi. Benzoic acid and B. subtilis GDYA-1 may contribute to environmental-friendly protect crops from phytopathogenic fungi.