• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.7
• /
• pp.969-973
• /
• 2013

To simulate the effect of high dose-rate radiation on semiconductor devices, device modeling work has been performed especially in the area of photo-current generation by a PIN diode. The resultant analytical values were compared with experimental ones that were specially designed and performed to benchmark the simulation results. Initial results showed 27.85% error between the simulation and the experiment. The error can be further reduced by improvement both in simulation and in related experiments. The developed technique from the study can be applicable to radiation dosimetry and to analysis on the radiation effects in electronics.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.9
• /
• pp.1611-1614
• /
• 2010

The explosion of a nuclear weapon radiates a gamma-ray in the form of a transient pulse. If the gamma-ray introduces to semiconductor devices, much Electron-Hole Pairs(EHPs) are generated in depletion region of the devices[7]. as a consequence of that, high photocurrent is created and causes upset, latchup and burnout of semiconductor devices[8]. This phenomenon is known for Transient Radiation Effects on Electronics(TREE), also called dose-rate effects. In this paper 3D structure of inverter and NAND gate device was designed and transient pulse gamma-ray was modeled. So simulation for transient radiation effect on inverter and NAND gate was accomplished and mechanism for upset and latchup was analyzed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.467-470
• /
• 2009

Variable loads along the drive-train are attributed to frequent failures of gears, bearings, and other components. Wind parameters cannot be controlled and therefore any turbine load-reducing remedies must be established based on proper insights into the wind-turbine interactions. A novel control concept to performance optimization of wind turbines is presented. This proposed concept is based on analysis of the turbine status reflected in the SCADA data. Modern computational techniques are used to optimize performance of a wind turbine from tree basic perspectives: drive-train, power output, and power quality. The proposed approach demonstrates that gains in the metrics representing the three perspectives and the corresponding control goals can be significantly improved for any wind turbine. The solution is applicable different turbine types operating in different wind regimes, e.g., winds of different speeds and variability. Simple and transparent parameters allow an operator to determine a balance between the operations and maintenance, technical, business objectives. The proposed modeling framework was embedded in software. The software tool has been tested on the data collected from 1.5 MW wind turbines.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.5
• /
• pp.857-862
• /
• 2017

The management of the electric power facilities became important in accordance with the industrial development and electric power facilities were influenced by weather. Even if the same kind of electric power facilities is estimated for extracting the time-varying failure rate, the failure rate could be different depending on external effect such as climate. This research will show the data mining modeling of the weather-related outage and influence of weather on the electric power facility with recent data.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.426-429
• /
• 2011

광범위한 지형을 배경으로 하는 게임과 같은 실시간 시뮬레이션 시스템에서 사실적 표현을 높이는 중요한 요소 중 하나가 나무와 같은 자연물 표현이다. 하지만 시스템에 적합한 나무 모델을 매번 새롭게 제작하고 표현하는 일은 다소 어려움이 따른다. 본 연구는 이러한 문제를 해결하기 위하여 실시간 시스템에 적합한 다양하고 사실적인 나무를 모델링하는 방법을 설계한다. 이는 프랙탈 기반의 재귀적 계층 구조를 바탕으로 가지 성장의 자기조직화 처리를 결합하여 나무 성장 과정을 단순화시킴으로써 실시간 시스템에서 직관적이고 효율적으로 활용가능하게 한다. 또한 다양한 나무 모델을 자연스럽게 생성할 수 있도록 인터렉티브 제어 요소를 정의함은 물론 실시간 시스템 내 많은 수의 복잡한 나무 모델을 효율적으로 렌더링하기 위한 GPU를 기반으로 한 가지 표면에 대한 LOD 설정과 인스턴싱 방법을 추가하여 그 결과를 함께 보인다.

• The Journal of Information Systems
• /
• v.20 no.3
• /
• pp.1-24
• /
• 2011

Recently, six sigma has been widely adopted in a variety of industries as a disciplined, data-driven problem solving approach or methodology supported by a handful of powerful statistical tools in order to reduce variation through continuous process improvement. Also, data mining has been widely used to discover unknown knowledge from a large volume of data using various modeling techniques such as neural network, decision tree, regression analysis, etc. This paper proposes a six sigma methodology based on data mining for effectively and efficiently processing massive data in driving six sigma projects. The proposed methodology is applied in the hot stove system which is a major energy-consuming process in a "P" steel company for improvement of heat efficiency through reduction of energy consumption. The results show optimal operation conditions and reduction of the hot stove energy cost by 15%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3109-3120
• /
• 1996

SDL has been standardized to specify behavioral aspects of communication systems based on the formal description technique, and it is powerful and user friendly in the sense of supporting human communication and understanding, formal analysis andcomparison of behaviors, alternative implementations and design optimization, and its structural decomposition. However, SDL is not sufficient for an efficient handing of entrire system descriptions because the communication systems are generally very complex, and composed from the various interactions among sub-systems. Also, it is very difficult to explicitly verify dynamic views such as liveness and reachability. it leads the demands on analysis scheme to verify dynamic behaviros of specified systems. This paper presents modeling concepts of Petri Nets from SDL and transformation rules to Numerical Petri Nets to provide efficient technqiques for verification of dynamic behaviors, and proposes the reachability garaph that is able to trace all reachable states of a modeled system and reduce an information loss on the reachability tree.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.6
• /
• pp.43-53
• /
• 1998

본 논문에서는 한국어 TTS시스템을 위한 운율구 추출, 운율구 사이의 휴지 기간, 음소의 지속 시간 모델링 방법을 설명한다. 실험을 위해 여러 장르로 구성된 400문장을 선 정하고, 이를 전문 여성 아나운서가 발성하였다. 녹음된 음성 신호에 대해 음소 및 운율구 경계를 결정하고, 문장에 대해서는 형태소 분석, 발음표기 변환, 구문 분석을 수행하였다. 400문장(약33분) 중 240문장(약20분)을 이용하여 결정 트리 및 회귀 트리를 학습시킨 후, 160분장(약13분)에 대해 실험하였다. 운율 모델링을 위한 특징들이 제안되었고, 학습된 트리 들을 해석함으로써 특징들의 유효성이 평가되었다. 실험 문장에 대해 운율구 경계의 유무를 결정하는 결정 트리의 오류율은 14.46%이었고, 운율구 사이의 휴지 기간과 음소 지속 시간 을 예측하기 위한 회귀 트리들의 평균 제곱 오류근(RMSE)이 각각 132msec, 22msec이었다. 수집된 모든 자료(400문장)로 학습한 결과, 운율구 경계 결정 오류율, 휴지 기간 및 지속시 간 RMSE의 10-fold cross-validation 추정치가 각각 13.77%, 127.91msec, 21.54msec이었다.

• 한국데이터정보과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.115-124
• /
• 2004

Data mining is the method to find useful information for large amounts of data in database. It is used to find hidden knowledge by massive data, unexpectedly pattern, relation to new rule. The methods of data mining are association rules, decision tree, clustering, neural network and so on. Association rule mining searches for interesting relationships among items in a given large data set. Association rules are frequently used by retail stores to assist in marketing, advertising, floor placement, and inventory control. There are three primary quality measures for association rule, support and confidence and lift. We analyze Gyeongnam social indicator survey data using association rule technique for environmental information discovery. We can use to environmental preservation and environmental improvement by association rule outputs.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.358-365
• /
• 2016

We propose a novel application of random forest, a machine learning-based general classification algorithm, to analyze the influence of design attributes on the silicon-to-SPICE (S2S) gap. To improve modeling accuracy, we introduce magnification of learning data as well as randomization for the counting of design attributes to be used for each tree in the forest. From the automatically generated decision trees, we can extract the so-called importance and impact indices, which identify the most significant design attributes determining the S2S gap. We apply the proposed method to actual silicon data, and observe that the identified design attributes show a clear trend in the S2S gap. We finally unveil 10nm key fin-shaped field effect transistor (FinFET) structures that result in a large S2S gap using the measurement data from 10nm test vehicles specialized for model-hardware correlation.