• Journal of Korean Neurosurgical Society
• /
• v.47 no.4
• /
• pp.252-257
• /
• 2010

Objective : Barbiturate coma therapy (BCT) is a useful method to control increased intracranial pressure (IICP) patients. However, the complications such as hypotension and hypokalemia have caused conditions that stopped BCT early. The complications of low dose BCT with $Bispectral^{TM}$ index (BIS) monitoring and those of high dose BCT without BIS monitoring have been compared to evaluate the efficacy of low dose BCT with BIS monitoring. Methods : We analyzed 39 patients with high dose BCT group (21 patients) and low dose BCT group (18 patients). Because BIS value of 40-60 is general anesthesia score, we have adjusted the target dose of thiopental to maintain the BIS score of 40-60. Therefore, dose of thiopental was kept 1.3 to 2.6 mg/kg/hour during low dose BCT. However, high dose BCT consisted of 5 mg/kg/hour without BIS monitoing. Results : The protocol of BCT was successful in 72.2% and 38.1% of low dose and high dose BCT groups, respectively. The complications such as QT prolongation, hypotension and cardiac arrest have caused conditions that stopped BCT early. Hypokalemia showed the highest incidence rate in complications of both BCT. The descent in potassium level were $0.63{\pm}0.26$ in low dose group, and $1.31{\pm}0.48$ in high dose group. The treatment durations were $4.89{\pm}1.68$ days and $3.38{\pm}1.24$ days in low dose BCT and high dose BCT, respectively. Conclusion : It was proved that low dose BCT showed less severe complications than high dose BCT. Low dose BCT with BIS monitoring provided enough duration of BCT possible to control ICP.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2002.10a
• /
• pp.168-168
• /
• 2002

To establish a test protocol for the rodent 20-day thyroid/pubertal assay, flutamide and diethylstilbestrol (DES) were administered to intact male Sprague-Dawley rats from postnatal day 33 for 20 days. Flutamide (1, 5, and 25 mg/kg/day) or DES (10, 20, and 40 ug/kg/day) was given once daily by oral gavage to immature male rats. Prepuce separation was significantly delayed in flutamide group and in DES group. One day after the last dose, the rats were killed and pituitary, thyroid, and reproductive organs were removed and weighed. Flutamide treatment resulted in a significant reduction in the weights of epididymides, ventral prostate, seminal vesicles plus coagulating glands and fluid (SVCGF), levator ani. bulbocarvenus muscles (LABC), Cowper's glands, and glans penis. The weight of adrenal glands decreased at % mg/kg/day, while testes and any other organ weights were unaffected. No microscopic changes were observed in the thyroid glands. Serum levels of testosterone wert significantly increased in the flutamide-treated groups and serum levels of estradiol were also increased. A significant reduction in the weights of testes, epididymides, ventral prostate, SVCGF, LABC, Cowpers glands, and glans penis of DES treated group. Serum testosterone and LH decreased significantly in DES group. Decrease of estradiol was observed, but not significant. These results indicate that flutamide and DES delay puberty in the male rat and its mode of action appears to be via altered secretion of steroids, which subsequently affect the development of the reproductive tract. (Supported by the grant from NITR/Korea FDA for Endocrine Disrupter Research.)

• Development and Reproduction
• /
• v.15 no.1
• /
• pp.41-52
• /
• 2011

In the present study, embryoid bodies (EBs) obtained from induced pluripotent stem cells (iPSCs) were induced to differentiate into germ lineage cells by treatment with bone morphogenetic protein 4 (BMP4) and retinoic acid (RA). The results were compared to the results for embryonic stem cells (ESCs) and multipotent spermatogonial stem cells (mSSCs) and quantified using immunocytochemical analysis of germ cell-specific markers (integrin-${\alpha}6$, GFR-${\alpha}1$, CD90/Thy1), fluorescence activating cell sorting (FACS), and real time-RT-PCR. We show that the highest levels of germ cell marker-expressing cells were obtained from groups treated with 10 ng/$m{\ell}$ BMP4 or 0.01 ${\mu}M$ RA. In the BMP4-treated group, GFR-${\alpha}1$ and CD90/Thy-1 were highly expressed in the EBs of iPSCs and ESCs compared to EBs of mSSCs. The expression of Nanog was much lower in iPSCs compared to ESCs and mSSCs. In the RA treated group, the level of GFR-${\alpha}1$ and CD90/Thy-1 expression in the EBs of mSSCs Induced pluripotent stem cells, Mouse embryonic stem cells, Multipotent spermatogonial stem cells, Germ cell lineage, Differentiation potential. was much higher than the levels found in the EBs of iPSCs and similar to the levels found in the EBs of ESCs. FACS analysis using integrin-${\alpha}6$, GFR-${\alpha}1$, CD90/Thy1 and immunocytochemistry using GFR-${\alpha}1$ antibody showed similar gene expression results. Therefore our results show that iPSC has the potential to differentiate into germ cells and suggest that a protocol optimizing germ cell induction from iPSC should be developed because of their potential usefulness in clinical applications requiring patient-specific cells.

• Applied Biological Chemistry
• /
• v.40 no.6
• /
• pp.567-571
• /
• 1997

Numbers of chemical agents which have been shown to inhibit either auxin signal transduction pathway or ethylene formation in plant cells were applied to cut flower stems of snapdragon (Antirrhinum majus L.) and their effects on the postharvest gravitropic response were studied. The chemical treatments were done by submerging either the stem base or the top part of cut flower, which involves the gravistimulus-sensitive region, for 1 h at $25^{\circ}C$. When the chemicals were supplied from the cut stem base, the gravitropic upward bending of flower stalks kept horizontally after the treatments with 20 mM CDTA or 10 mM $CoCl_2$ was comparable to that of the untreated control, but o-vanadate showed a certain degree of effectiveness for suppressing the bending response. In contrast, the direct application of those agents to the gravitropically sensitive region of cut flowers in the presence of 0.01% Triton X-100 resulted in a substantial reduction of the gravitropic response. In the case of 20 mM $CoCl_2$ treatment, almost total elimination of gravitropism without any significant deterioration of flower quality was observed. The results indicate the possibility of preparation of a protocol involving $CoCl_2$ and a proper surfactant for commercial use to suppress the gravitropic response of cut flowers during postharvest storage and transportation.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.418-435
• /
• 2001

Root canal preparation process is of utmost importance in successful treatment of root canal. Also, one of the most important purpose of the root canal preparation is to enlarge the root canal three dimensionally without changing the curvature of the root canal However as the curvature of the root canal increases, there are many difficulties involved in formation of optimum root canal. Therefore in order to solve the above mentioned problems, new developments in methods of root canal preparation and equipments for such purposes were made. Recently, vigorous studies about newly introduced engine-driven nickel-ti-tanium rotary file are conducted. As shown in research results to dates, it is well established that the use of nickel-titanium file is better suited for curved root canal than stainless steel file in maintaining the curvature or root canal and reducing the deformation of root canal. However it is also acknowledged that there are a few discrepancies in research results according to protocol, due to failure to remove variables in experiments. In addition, although it is recommended by the manufacturer that the GT rotary file should maintain a low rotational speed of 150~350rpm and 'light pressure' as light as not to break the lead of a pencil, academic studies about the vertical force which is not yet standardized are not sufficiently explored. Therefore, this research devised and utilized a special research equipment to standardize the appropriate range of vertical force for GT rotary file through experiments by breaking of the lead of a pencil as expressed by the manufacturer and to accurately measure factors involved through repeating and recreating the environment of root canal preparation. Forming nine experimental groups by varying the vertical forces (150g. 220g, 300g) and rpm (150rpm, 250rpm, 350rpm), the effects of changing vertical forces and rpm on working efficiency were measured in terms of time expended in root canal preparation by crown-down method using a transparent resin block with 35 degree curvature and GT rotary file (z-test). The following research using this special research equipment that involved nine experimental groups and varying the vertical force for root canal preparation from 300g which is within the normal vertical force range to 700g and 1000g which fall outside the normal rpm range. The results were as follows : 1. Analysis of the experiment results revealed that the time spent in root canal preparation decreased as the vertical forces and rpm increased (p<0.05). Also, the effects of rpm were greater than those of the vertical forces within the normal vertical force range ($\beta$-weight test). 2. Observation of the deformation of GT rotary file revealed that deformation increases in a direct correlation with the vertical force increase and in a reverse correlation with the rpm decrease. In the case of the vertical forces close to the normal range, the probability of GT rotary file deformation were quite different depending on the rpm changes. In the case of greater vertical forces, the occurrences of deformation of the file were more frequent regardless of the rpm changes. 3. Deformation and breakage of file were also commonly observed in the expended time measurement experiments and GT rotary file deformation experiments in which low speed rpm (150rpm) was used and at the curved portion of the resin block.

• Korean Business Review
• /
• v.18 no.1
• /
• pp.59-79
• /
• 2005

recently, world is progressing large quantity consumption with continuous Innovation and economic growth and pollution is accelerated at these process. Increase of industry activity and service that is point of corporation activity is discharging environmental pollutants at whole process to manufacture of end product and exhaust process from acquisition of raw material for accompanied product production hereupon. At the same time, being promoting resources consumption by that use much raw material, As a result, is becoming obstacle factors in sustainable development. So, corporation's responsibility for environmental protection is emphasized. Corporation which must prepare in green round or environmental problems should consider environmental effects that is happened over whole life of products that include waste treatment after raw material acquisition and use as well as selling end product simply. A Life Cycle Assessment techniques is normalized and standardized in International Standard Organization for technical committee 207(TC 207) world widely, and effort to apply in corporation's activity because mastering LCA techniques in domestic several corporations is undergone actively. Coming into effect of Kyoto's Protocol and International Organization for Standard 14000 series revision are presenting new survival principle in competition between country or corporation. LCA technique may become very useful means to corporation which wish to attempt environment management in real condition that awareness for environment is important. Also, An LCA to each product is going to cause big effects in corporation's whole image as well as competitive power raising for single product. Therefore, this research wishes to examine some instances for the future competitive product development at the estimation of environmental friendliness using LCA techniques and more theoretical considerations of the LCA techniques that can dominate corporation's fate.

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.1
• /
• pp.72-77
• /
• 2004

Background : A tracheobronchial obstruction in lung cancer is associated with significant morbidity and mortality due to dyspnea, cough, hemoptysis, and recurrent respiratory infection. It is well known that one of standard treatments is photodynamic therapy (PDT) in tracheobronchial obstruction after radiotherapy, chemotherapy, and/or surgery. We reported here the role of PDT in airway obstruction in patients advanced lung cancer. Method : Pre-treatment protocol consisted of clinical, radiologic, and bronchoscopic examination, pulmonary function test, and assessment of Karnofsky performance status. A 2 mg/kg of porfimer sodium was injected intravenously, and then followed by cylindrical and/or interstitial irradiation with 630 nm of laser after 48 hours. The repeated bronchoscopy for debridement of necrotic tissue and re-illumination was performed after 48 hours. Result : Improved airway obstruction and selective tumor necrosis were achieved by photodynamic therapy in all cases. Dyspnea and performance status were improved in three cases. A purulent sputum, fever and hemoptysis were improved in one of five cases. After PDT, all patients showed temporarily aggravation of dyspnea, two of five showed febrile reaction for a few days and nobody presented photosensitivity reaction, hemoptysis and respiratory failure. Conclusion : Our experiences of PDT are effective in palliation of inoperable advanced lung cancer in terms of tracheobronchial obstruction.

• Food Science and Preservation
• /
• v.16 no.1
• /
• pp.75-81
• /
• 2009

Benzo(a)pyrene[B(a)P] levels were determined in processed oils and by-products of corn oil, and removal protocol was formulated. The cause of high level B(a)P contents in corn oil was established. Corn germ had a B(a)P level more than 80% that of whole corn. B(a)P content in final deodorized corn oil was $2.15{\mu}g/kg$, after the usual refining process. B(a)P contents less than $2.0{\mu}g/kg$ could not be attained by routine refining process. However, deodorized corn oil, with B(a)P level of $0.09{\mu}g/kg$, could be prepared by treatment of oil with approximately 2% (w/w) mixed granules(acidic clay:active carbon= 90:10[w/w]). The optimal amount of active carbon was 10% (w/w) that of acidic clay;higher levels of active carbon was not required. The optimal particle size of active carbon was $50{\sim}100$ mesh, removal of B(a)P from bleached corn oil was efficient at this mesh size.

• Clinical and Experimental Reproductive Medicine
• /
• v.21 no.3
• /
• pp.233-240
• /
• 1994

This study was conducted to compare the endocrine milieu, and pregnancy rates in In Vitro Fertilization and Embryo Transfer(IVF-ET) program employing combined with gonadotropin releasing hormone agonist(GnRH-a) and pergonal(LH 75lU+FSH 75lU) when either human chorionic gonadotropin(HCG) or progesterone were used for luteal phase support. A total number of 40 IVF-ET treatment cycles were prospectively studied. Ovarian hyperstimulation method was modified ultrashort protocol using GnRH-a. All patients started Decapeptyl at menstrual cycle day # 2, and HMG was started at # 3 days. When leading follicle was ${\geqq}$18mm or at least two follicles were ${\geqq}$14mm in diameter, HCG 10000lU intramuscularly was injected. After 36 hours HCG administration, oocytes were retrieved as usual guided by transvaginal ultrasound. Embryo were transfered 36-48 hours later. The patient's cycles were prospectively randomized to receive HCG(20cycles) or Progesterone (20cycles) for luteal support. The progesterone group received 25mg 1M starting from the day of ET. The HCG group received 1500IU 1M. on days 0, +2, +5 after ET. Estadiol($E_2$) and Progesterone($P_4$) were measured on the day of oocyte aspiration, ET day, and every 6 days thereafter. Results were follows as; 1. Estradiol, progesterone and LH levels on the day of HCG trigger, retrieved oocytes and number of transfered embryo were not significantly different in both groups. 2. On the day of aspiration and embryo transfered day, $E_2$, $P_4$ level were significantly higher in progesterone group than HCG group(p<0.01). 3. $E_2$, $P_4$ level on 6 days after ET were significantly higher in progesterone group than HCG group(p<0.01). But, $P_4/E_2$ ratio was not different in both groups. 4. $E_2$, $P_4$ level 12 days after ET were decreased abruptly in both groups and higher hormonal level appeared in HCG group(P<0.01). 5. The total pregnancy rate in the HCG group was 40% (8/20) and in the progesterone group 15%(3/20). 6. Comparing the pregnant and nonpregnant cases progesterone group was not different the hormonal status. In HCG group, pregnant cases appeared in higher $P_4$, $P_4/E_2$ ratio than nonpregnanct cases(P<0.01).

• The Journal of Korean society of community based occupational therapy
• /
• v.7 no.1
• /
• pp.25-35
• /
• 2017

Objective : The aims of this study was to investigate the effects of modified constraint induced movement therapy(CIMT) on upper extremities function of children with hemiplegic cerebral palsy. Methods : The participants of this study are 4 children with hemiplegic cerebral palsy aged between 8 to 11 years old. During the modified CIMT period, the unaffected hand of the subjects was restrained by a hand splint for 8 weeks, five days per week, five hours a day. And the affected upper extremity was strongly trained by performing functional tasks, which were individually structured use of the affected arm. Measurements used to assess hand function are Jebsen Hand Function Test, and 3D Motion Analysis. The Jebsen Hand Function Test was performed repeatedly every two weeks. The 3D Motion Analysis was performed before and after the 8 weeks of modified constraint induced movement therapy. Results : After the modified CIMT, there was a significant improvement in completed time for the 6 tasks of Jebsen Hand Function Test(p<.05). 3D Motion Analysis was that the finger tapping and the hand tapping has been significantly decreased (p<.05), and the pronation-supination movement has been significantly increased as well(p<.05). Conclusion : In the results of this study, it is evidenced that modified CIMT is effective treatment for upper extremities function of children with hemiplegic cerebral palsy. For future research, it is recommended to examine various periods and protocol of modified CIMT including impact of long periods application.