• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.150-153
• /
• 2007

Apply electromagnetic stirring system to making rheology slurry of Al7075. This experiment has important element which is the relation between solid fraction percent and melt temperature of Al7075. The rheology slurry of Al7075 eliminated liquid phase to include alloying element of copper and zinc by squeeze casting process. In result the most structure was composed entirely of globular primary $\alpha$. Used this material for this study. This study made a comparison of mechanical property according to heat treatment T6 at each melt temperature ($619^{\circ}C$ and $615^{\circ}C$). The microstructure and component are observed how heat treatment T6 weight with the mechanical property by SEM-EDS.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.190-195
• /
• 2004

The effect of heat treatment on torsion characteristics of high nitrogen steel wire has been studied by torsion test, tensile test, specific resistivity, X-ray diffraction and scanning electron microscopy. After heat treatment at 600∼$700^{\circ}C$, torsion cycle was increased with increasing temperature. Especially, in case of high nitrogen steel wire heat teated at $650^{\circ}C$, torsion cycle was sharply increased. It is estimated that cold worked high nitrogen steel wire started to recrystallize and phase transform at 64$0^{\circ}C$ in air atmosphere.

• The Journal of Internal Korean Medicine
• /
• v.39 no.6
• /
• pp.1290-1295
• /
• 2018

Objectives: This case reports a certain level of improvement for asymptomatic proteinuria with short-term administration of herbal medicine. Methods: In the first treatment phase, the patient was treated with Dangguisu-san (DGSS) for his rib fracture. In the second treatment phase, the patient was treated with a herbal formulation of Astragali and Angelicae Sinensis (A&As particle) for asymptomatic proteinuria. Results: Treatment with herbal medicine resulted in a decrease in the patient's complaints regarding symptoms. Also, proteinuria-related items in hematology and urinalysis were improved. Conclusions: Herbal medicine therapy may be effective for proteinuria treatment.

• The Journal of the Korea Contents Association
• /
• v.15 no.9
• /
• pp.395-402
• /
• 2015

when the radiation therapy of chest and abdomen, evaluation of the tumor motion and the data was used to minimize damage to normal tissues by separating the tumor and normal tissue and maximize tumor therapeutic effect. Lung and liver cancer each 20 patients based on the 50% top phase using 4D-CT simulation and Light speed-16 of shooting equipment 30 ~ 70 % gating phase interval and 0 ~90 % movement in the full phase interval was measured. If the full phase 0 ~ 90% with gating phase 30~70% of tumors in the liver and lung is shown the biggest difference compared to the motion and the size of the GTV was the largest difference in the I(inferior), full phase 0~90% degree of tumor motion only when a relatively large, gating phase to 30~70% of the tumor when the movement has been found that the reduced average 7.1mm. In the 4D-CT simulation comparing the motion value when the full phase 0~90 % and gating phase 30~70 % when the motion value, twice in the gating phase 30~70 % more than full phase 0~90 % showed a small movement value. The exposure to normal tissues, based on the results obtained from the 4D-CT simulation can be significantly alleviated, After treatment will reduce pain and disability in patients with radiation is expected to be able to effective treatment.

• Journal of the Korean Society for Heat Treatment
• /
• v.28 no.3
• /
• pp.139-145
• /
• 2015

Effects of austenitizing, cryogenic treatment and tempering conditions on the phase change, microstructure and Vickers hardness value have been studied in STD11 steel for tool and die. The volume fraction of retained austenite increased with a rise in austenitizing temperature, while the volume fraction of eutectoid $M_7C_3$ carbides decreased. The retained austenite could be reduced by cryogenic treatment i.e., maintaining at $LN_2$ temperature ($-196^{\circ}C$) for 12hrs but a little amount of retained austenite did not transform to martensite further although holding time increased to 24 hrs or more. The microstructure of the quenched and then cryogenictreated specimen showed nano-sized and needle-shaped carbides in matrix due to the decomposition of martensite by tempering, but that of the one without cryogenic treatment still revealed retained austenite by tempering even at $500^{\circ}C$.

• Journal of Korean Foot and Ankle Society
• /
• v.19 no.3
• /
• pp.81-85
• /
• 2015

Acute sprain of the ankle requires comprehensive history taking and physical examination in diagnosing the type of severity and deciding on the plan of treatment. Literature supports functional treatment as the treatment of choice for grade I and II injuries. During the acute phase, the goal of treatment focuses on controlling pain and swelling. PRICE (protection, rest, ice, compression, and elevation) is a well-established protocol at this phase. There is some evidence that application of ice and use of nonsteroidal anti-inflammatory drugs improves healing and speeds recovery. Then the functional treatment (motion restoration and strengthening exercises) is administered to progress the rehabilitation appropriately in order to facilitate healing and restore the mechanical strength and proprioception. Early mobilization has been shown to result in more rapid return to work and daily activities than immobilization. Grade III injuries still generate controversy in terms of the best management available, and more studies on early mobilization, cast immobilization, or surgery are needed. Even the Cochrane reviews published to date are not conclusive.

• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.90-93
• /
• 2002

The sintering process of BSCCO 2223 tapes is a complex process that is very sensitive to parameters, such as temperature, oxygen partial pressure, heating and cooling rate and holding time. During the first heat treatment, 2212 phase of precursor powder is partially transformed into 2223 phase and some residual secondary phases, such as $(Bi,Pb)_2$$Sr_2$CuO／sub y／(2201), $(Ca,Sr)_2$CuO／sub y／(2/1AEC), (Ca,Sr)／sub 14／Cu／sub 24／O／sub 41／(14／24 AEC) etc. The secondary phases are difficult to be removed from the BSCCO 2223 matrix on the heat treatment. These secondary phases degrade the critical current density. In order to minimize the amount and size of alkaline earth cuprate(AEC) particles step heat treatment is applied during the first heat treatment under the varying atmosphere. Experimental results showed that by adapting the step heat treatment process, the amount and particle size of the secondary phases in the final tapes are decreased. Consequently, the BSCCO 2223grain texture and Jc properties are improved.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.3
• /
• pp.115-120
• /
• 2012

It has been known that the ferritic stainless steel can be changed to martensitic stainless steel when nitrogen is added. However the high hardness of martensitic stainless steel prevents the plastic deformation. In this study, instead of martensite, the surface microstructure was changed into nitrogen pearlite to increase the plastic deformation easily by isothermal heat treatment after high temperature gas nitriding (HTGN) the AISI 430 ferritic stainless steel. The isothermal treatment was carried out at $780^{\circ}C$ for 4, 6, and 10 hrs, respectively, after HTGN treatment at $1100^{\circ}C$ for 10 hrs. The surface layer of isothermal-treated steel appeared nitrogen pearlite composed with fine chromium nitride and ferrite. Hence, the interior region that was not affected by nitrogen permeation exhibited ferrite phase. When quenching the isothermal treated steel at 1100oC, martensitic phase formed at the surface layer. The hardness of surface layer of isothermal-treated steel and quenched steel measured the value of 150~240 Hv and 630 Hv, respectively.

• Journal of Acupuncture Research
• /
• v.40 no.1
• /
• pp.67-77
• /
• 2023

This study individually analyzed the effects of Korean Facial Chuna Manual Treatment (K-FCMT) combined with Korean medicine (KM) treatment (acupuncture, electroacupuncture, pharmacopuncture, and herbal medicine) on five patients with acute Bell's palsy who visited Dongsuwon Korean Medicine Hospital between August 1 and 31, 2022. During inpatient treatment, two of the five patients received K-FCMT 5-6 times a week, and the other three received the same frequency during outpatient treatment for approximately 2 weeks. Patients with a House-Brackmann grading scale (HBGS) score of ≤4 and Yanagihara unweighted grading system (Y-score) ≥7-8 began to recover after the 2nd-3rd sessions of K-FCMT, which entered the recovery phase quickly. As patients entered the recovery phase (7-9th sessions of K-FCMT), symptoms improved to HBGS scores of 1-2 and Y-scores of 35-40 points. This study suggests the possibility of applying K-FCMT combined with KM treatment to patients in the acute stage of Bell's palsy.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.5
• /
• pp.251-258
• /
• 2008

A transmission electron microscope investigation has been performed on the morphology of dislocations in deformed ${\gamma}^{\prime}-Ni_3(Al,Ti)$ alloys containing fine dispersion of disordered ${\gamma}$ particles. Superlattice dislocations dissociate into fourfold Shockley partial dislocations in a uniform supersaturated solid solution of the ${\gamma}^{\prime}$ phase. Dislocations are attracted into the disordered ${\gamma}$ phase and dissociate further in the particles. At any stage of aging, dislocations cut through the particles and the Orowan bypassing process does not occur even in the over-aged stage of this alloy system. The work necessary to pull the dislocation away from the disordered particles into the ordered matrix should mainly contribute to increase the strength of the ${\gamma}^{\prime}$ phase containing fine dispersion of the disordered ${\gamma}$ phase.