• Title/Summary/Keyword: Treatment environment

Search Result 5,732, Processing Time 0.031 seconds

The Study on the Solubilization of Sewage Sludge by Electrolysis Treatment (전기분해를 이용한 하수슬러지 가용화 연구)

  • Kim, Jae Hyung;Jeon, Hye Yeon;Lee, Jun Cheol;Pak, Dae Won
    • Journal of Energy Engineering
    • /
    • v.21 no.2
    • /
    • pp.194-201
    • /
    • 2012
  • In this research, a sewage sludge solubilization study using electrolysis was performed as a pre-treatment for anaerobic digestion efficiency improvement. SCOD potency increased as the treatment time and electric current density increased with sludge electrolysis treatment while SCOD, TN, and TP especially showed the highest increase of 7.4 times, 1.9 times, and 1.3 times respectively at the 60 minute point of treatment. Solubilization was high at the strong acidic and alkaline status for the sewage sludge electrolysis treatment results along early stage pH, and especially, a high solubilization percentage of 32.9% was seen at pH 12. The above result shows that there was an increase of organic matter able to be used by microorganisms from sludge floc and the destruction of EPS structure due to direct and indirect oxidation following electrolysis.

The Effects of Residual Al on Plankton Community after Dissolved Air Flotation (DAF) Application (가압부상 후 잔류 응집제가 플랑크톤 군집에 미치는 영향)

  • Kim, Ho-Sub;Gong, Dong-Su;Lee, Hyung-Jin;Shin, Jong-Kyu;Kang, Tae-Gu
    • Journal of Korean Society on Water Environment
    • /
    • v.23 no.6
    • /
    • pp.837-842
    • /
    • 2007
  • This study was conducted to test the effect of residual Al on plankton community after dissolved air flotation (DAF) application. Growth rate of phytoplankton after DAF application ($0.37day^{-1}$) was about 2 times lower than that before DAF application ($0.70day^{-1}$). Under the condition of addition of nitrogen and phosphorus without light, growth rate phytoplankton in treatment without residual Al increased in difference with showing the negative growth rate in treatment with residual Al. Under the condition of light without addition of nutrient, growth rate of phytoplankton was no noticeable difference between the before and after DAF application. The relatively high settling rate (0.47 m/day) was observed in treatment after DAF application. Although the abundance of rotifer decreased, the abundance of copepod and cladoceran such as Daphnia galeata, Diaphanosoma sp. and Bosmina longirostris with relative higher grazing was no noticeable difference between the before and after DAF application. In the treatments before and after DAF application with zooplankton, growth rate of phytoplankton was $0.41{\pm}0.08day^{-1}$, $0.20{\pm}0.03day^{-1}$, respectively. This difference was in treatment after DAF application similar with those in treatments before and after DAF application without zooplankton. Those indicate that the filter-feeding effect of zooplankton on phytoplankton community may be not changed by residual Al after the DAF application. These results suggest that residual Al after DAF application be to improve water quality by inhibition of growth rate as well as increasing settling rate of phytoplankton.

A study on development medicine diagnosis system by Biosignal transmission In Wireless environment to use PDA (무선 환경에서 PDA를 이용한 생체신호전송으로 진단 보조 시스템 개발을 위한 기초 연구)

  • 김동욱;이경진
    • Proceedings of the KAIS Fall Conference
    • /
    • 2003.06a
    • /
    • pp.219-221
    • /
    • 2003
  • This system is Emergency patient medical examination and treatment way through biosignal transmission to use PDA. Store measured biosignal that is stored to file to database by Application, This system helps doctor's treatment that transmit patient's biosignal data and patient's symptoms use wireless internet. ThenOffer more than safer medical treatment environment to a doctor and patient

  • PDF

Study on the Adolescent Patient′s Stress during Hospitalization (청년기환자의 입원생활에 따르는 긴장에 관한 연구)

  • 백영주
    • Journal of Korean Academy of Nursing
    • /
    • v.6 no.1
    • /
    • pp.72-79
    • /
    • 1976
  • Contemper nursing literature place much importance on human- centered and individualized care. Nursing research has related stress during hospitalization of adolescent patients to adaptation to a new environment, isolation from friends, limitation due to illness, over protection of parents and communication with member of the medical team. The investigator conducted this study in the hope that an understanding of adolescents responses to hospitalization, their perceptions, the kinds and levels of stress, and the relationships between stressors and individual characteristics would contribute to the improvement of adolescent patient care. The objective of the study was to obtain informations related to the adolescents psychological stress experience during hospitalization, specifically stress from interpersonal relationships and communication, isolation from the family, social or economic problems, illness and from the treatment environment and nursing care. An interview schedule adopted from Holmes and Rahe's Social Readjustment Rating Scale and selected items from Voicer's instrument on stress-producing events was used with 120 adolescent inpatients aged 13 to 18 years three general hospitals in Seoul during Aug. 10, to Sep. 30, 1975. 1. The sample consisted of 66 male and 54 female patients. Sixty-six percent were late adolescents, aged 16 to 18 years: 4% were early adolescents, aged 13 to 15 years. The primary cause for hospitalization was for orthopedic problems (35.8%). More than half of these (54.4%) were due to injury or accident. 2. Stress eclated to illness revealed the highest score (4.97), followed by stress related to treatment environment and nursing care (4.34) , isolation from family and social or economic problems (4.01) and interpersonal relationships and communication (3.96). 3. The perceived indifference of doctors and nurses was a serious cause of stress (mean=4.83). Fellow patients and visitors caused least stress (mean=2.06). 4. Discontinuation of education or unemployment were major stressful events (mean=4.71). Least stressful was isolation from the family (mean=3.47). 5. More than 94% of the respondents expressed fears related to body image (mean=4.97) 6. Within the category of treatment environment and nursing care, items related to restrictions because of treatment, discomfort because of treatment, inadequate explanation from nurses about procedures were rated as severe stress events (mean=4.6). Items related to the ward environment and to having a relative stay with them were seen by the group as less serious events (mean=3.7). 7. Stress related to interpersonal relationships and communication was correlated positively with female patients and those preferring passive activities. (P〈0.05) 8. Stress related to family problems was positively related to female and early adolescent patients (P< 0.05). Stress related to social problems was positively , elated to students and those preferring active pursuits (P< 0.05). 9. There were no correlation between the high stress related to disease and any of the characteristic items. (P> 0.05) 10. Stress related to treatment environment and nursing care was positively related of early adolescent and female and student patients. (P< 0.05) This group of hospitalized adolescents reported high level of stress related to treatment environment and nursing care, due to lack of consideration of normal growth and development and individual characteristics. The findings have important implications for the planning of effective, individualized, comprehensive nursing care of adolescents during hospitalization.

  • PDF

O&M Evaluating for Sewage Treatment Plants in China as a Developing Country (개발도상국 중국의 하수처리장 운영.관리능 평가)

  • Kim, Kwon-Youn;Moon, Yong-Taik;Kim, Hong-Suck;Kim, Ji-Yeon
    • Journal of environmental and Sanitary engineering
    • /
    • v.21 no.3 s.61
    • /
    • pp.27-36
    • /
    • 2006
  • For the last 20 years, China has transformed itself from a rural economy into an industrial giant, averaging over 8 % annual growth of GDP. Unfortunately, this rapid growth has taken a significant toll on its natural resource base as well, particularly water resources. These problems have been exacerbated by a low level of sewage treatment technology and by the operating and maintenance (O&M). In case of urban areas, most big cities in China have a well functioning sewage system comprised of sewers and sewage treatment plants (STPs). Nevertheless, the existing STPs are still not capable of properly treating the sewage, both quantitatively and qualitatively. The rural areas in China cover a large land, with two-third of the nation's population. The low educational and poor economic states make it hard to process self-protection and management. In the surveyed area in Henan, there was no STPs put into use as of 2004, and the sewer lines are not well organized. The big issue for the currently planned STPs is the collection system not included in the plans.

Landfill Leachate Treatment and Boron Removal by Reverse Osmosis (RO막을 이용한 매립지 침출수 처리 및 붕소 제거)

  • Jung, Soojung;Na, Sukhyun;Bae, Sangok;Lim, Byungjin
    • Journal of Korean Society on Water Environment
    • /
    • v.28 no.5
    • /
    • pp.657-662
    • /
    • 2012
  • This study was carried out to evaluate the removal rate of organic and inorganic matters from landfill leachate using pre-treatment process as coagulation and limonite adsorption, and membrane process as RO (reverse osmosis) and NF(nanofiltration). By adding limonite adsorption as pre-treatment process, about 40% of organic matters in leachate was removed through pre-treatment process and 74.7% of boron was removed after RO process without pH adjustment. The rejection rate of boron in RO process mainly depends on the pH and increased at pH value of 10. RO process was performed as two stage system adjusting pH condtion to 7 and 10 in second RO stage for boron removal. Most (>90%) of TOC, Cl- and inorganic matters as Ca was rejected in first RO stage, the residue was rejected in second RO and the rejection rate was above 97%. Considering economic efficiency of operation cost, NF substituted for the first RO and total removal rate of TOC was above 90%. Through RO system toxicity to Daphnia in leachate was removed completely.

Characteristics and Effects of Radiation Treatment on Wood Pulping Process (목재 펄프 제조 공정에서의 방사선 효과 및 특성)

  • Won, So Ra;Shin, Hye Kyoung;Jeun, Joon Pyo;Kang, Phil Hyun
    • Journal of Radiation Industry
    • /
    • v.5 no.3
    • /
    • pp.227-230
    • /
    • 2011
  • Pulps were separated from wood chips using an Electron beam irradiation (EBI) treatment without a NaOH-AQ (anthraquinone) treatment for cooking. The methods were based on a hot water treatment after EBI and two-step bleaching processes. Chemical compositions and FT-IR spectroscopy demonstrated that the content of lignin and hemicellulose in the bleached wood pulps treated with various EBI dose decreased with an increase of EBI doses. Specifically, the lignin in the bleached with pulps treated at 600 kGy of EBI dose was almost completely removed. Moreover, TGA analysis showed that a thermal stability increased with increasing the content of cellulose but the lignin decomposed slowly over the wide region.

Effect of Flow Rate on the Continuous Cycling Electrolytic Treatment Process for Silver Ion Containing Wastewater (은 함유 폐수의 연속 순환 전해처리 시 유량변화가 회수 공정에 미치는 영향)

  • Chung, Won-Ju;Kim, Dong-Su
    • Journal of Korean Society on Water Environment
    • /
    • v.23 no.5
    • /
    • pp.577-580
    • /
    • 2007
  • The influence of flow rate has been investigated on the treatment efficiency of continuous cycling electrolytic process employing artificial and actual photographic wastewater which containing silver ion. For artificial wastewater, the treatment efficiency of process was found to rise ca. three times when the flow rate of wastewater was increased from 3 mL/min to 15 mL/min. The process efficiency was doubled under the same condition regarding actual wastewater. The effect of flow rate on the treatment efficiency was observed to be altered according to the metal ionic form and solution composition. The coefficient of mass transfer was estimated using model equation, which verified that the raised treatment efficiency at higher flow rate was due to the increased mobility of ionic species.

Development of Automatic Transmission Parts by Using Vacuum Carburizing Heat-treatment Technology (진공침탄 공정기술을 이용한 자동변속기 부품 개발)

  • Lee, Won-Beom;Moon, Gyung-Il;Cho, Yong-Ki;Lim, Kyung-Mook;Byun, Sang-Gyo
    • Journal of the Korean institute of surface engineering
    • /
    • v.43 no.5
    • /
    • pp.211-216
    • /
    • 2010
  • Vacuum carburizing process is well known process for its environment-friendly, low-cost, high-quality characteristics, compared with gas carburizing. In this study, a research was carried out to develop a process of vacuum carburizing for essential components of automotive transmission that is difficult to control its distortion. As a result, vacuum carburizing process is superior to gas carburizing in terms of cost, environment and quality.

A study on the Al cementation and formation of corrosion-resisting, hardening layer on the steel surface by the arc spray method (아크 용사법에 의한 강재표면에의 Aluminum침수 및 내식, 경화성 피막형성에 관한 연구)

  • 김영식;배차헌;오재환;문경만
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.13 no.2
    • /
    • pp.64-77
    • /
    • 1989
  • In this study, the experiments were carried out for the purpose of establishment of aluminium cementation to steel surface by diffusible heat treatment after making the coated film onto the substrate by arc spray method. Also, the microstructure and mechanical properties of the cementation layer produced by this study were inspected for various heat treatment and spraying conditions. Main results obtained are as follow ; 1. The coating film characteristics which have excellent errosion-resistance, high temperature oxidation-resistance are obtained by aluminium penetration heat treatment after making the sprayed aluminum coating film onto the steel substrate. 2. Aluminium diffusion penetration takes place at higher temperature than 660.deg.C, and the more heat treatment time and the higher heat treatment temperature adopted, the deeper diffusion layer obtained. 3. Insert gas arc spraying using argon gas as the carrier gas higher improvement of mechanical property than that of compressed air environment. 4. The coating film characteristics appeared to be improvement of adhesive property, porosity plugging effect by heat treatment in air environment.

  • PDF