• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1237-1244
• /
• 2016

Vehicle classification system in domestic tollgates is usually to use treadle sensor for calculating wheel width and tread of the vehicle. Due to the impact that occurs when the wheels of the vehicle contact, treadle sensor requires high durability. Recently, KHC(Korea Highway Corporation) began operating high-speed lane for cargo truck. High-speed cargo truck generate more impact the design criteria of previous treadle. Therefore, an increase in the maintenance and management costs of the treadle damage is concerned. In this paper, we propose an algorithm to classify vehicles using non-contact treadle sensors for improving durability from physical impacts. This was based on the KHC's classification criteria and showed a classification accuracy of 99.5 % in one experiment with 1892 vehicles through Changwon tollgate in 1020 local road. Therefore, it shows that vehicle classification system using non-contact treadle sensor could be applied to domestic toll tollgates, effectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.6
• /
• pp.627-634
• /
• 2016

Vehicle classification system in domestic tollgates is usually to use treadle sensor for calculating wheel width and tread of the vehicle. due to the impact that occurs when the wheels of the vehicle contact, treadle sensor requires high durability. recently, KHC(Korea Highway Corporation) began operating high-speed lane for cargo truck. high-speed cargo truck generate more impact the design criteria of previous treadle. therefore, an increase in the maintenance and management costs of the treadle damage is concerned. In this paper, we propose an algorithm for obtaining optimal wheel width and tread using non-contact treadle sensor that been improved durability from physical impacts. for the verification of the proposed algorithm, a field test was performed using 1/2/3/6 class vehicles based on the KHC's classification criteria. through this experiments, maximum error of the width and the tread is each ${\pm}2cm$ and ${\pm}8cm$, also the accuracy was measured as 98%, 97% or more, and proved that the proposed algorithm valid on to apply to the vehicle classification system.

• The Research Journal of the Costume Culture
• /
• v.21 no.6
• /
• pp.844-859
• /
• 2013

This study investigated the characteristics and changes of cotton and silk textile production in Honam district, especially in Gurye, Jella Province from the 1930s to the 1980s. To do this, research method in this study was both literature and fieldwork research and results were as follows. First, in terms of cotton fiber cultivation of Gurye, Chinese Cotton(在來綿) has been substituted for America Cotton(陸地綿) and additionally, Yellow Cotton (黃綿) has been cultivated in the 1930s. Also, in terms of silk fiber cultivation of Gurye, Joseon Silkworm has been substituted for Japanese Silkworm by inflowing the Japanese mulberry tree. Second, in terms of spinning method, cotton spinning has been conducted at every house by an individual tool from the 1930s to the 1950s and has been gradually changed to mechanization by market shop equipped with mechanized cotton gin and cotton whipping tool. However, there have been no changes in silk spinning method from the 1930s to the 1980s. Third, loom type has been changed from the traditional Korean back-strap loom to the treadle loom between the 1930s and the 1940s. Fourth, dyeing was conducted by chemical dyestuff after weaving. The circulation of textile was done through the joint market by Japan in the 1930s~1950s and has changed to the market sales by producers since the 1950s. Fifth, since the 1970s, the outputs of cotton and silk textile of Gurye have been reduced. This was connected with the westernization and the inflow of the synthetic fiber and cloth in cotton and was related to the changes of the nation policy and silk fiber inflow from the china to the Korean farm villages.

• The Research Journal of the Costume Culture
• /
• v.22 no.1
• /
• pp.16-27
• /
• 2014

This study investigated the characteristics of and changes in hemp textile production practices at Gurye in Jeollanam-do in modern times. To do this, in this study, both a literature review and fieldwork research were utilized as research methods. The literature review focused on Gurye's hemp data, and the fieldwork research involved two separate trials. Male and Female residents of Gurye who had experience in the area of hemp production from the 1920s to the 1980s participated in this study. The results were as follows. First, regarding hemp fiber cultivation in Gurye, hemp cultivation continued to the 1970s and there were no changes in hemp cultivation practices during the Japanese colonial-era. Second, there have been very important changes in hemp kilns over time. In the 1950s, there were both single-body kilns and separate-body kilns in Gurye. Later, specifically in the 1950s, a new type of kiln using an iron pot appeared, and the most modern kilns were concrete structures. Third, in Gurye, women cooperatively removed hemp husks immediately after stemming, subsequently bleaching the hemp by soaking it in lye or caustic soda. Over time, there have been changes in ash types and in soaking periods. Fourth, loom types changed from the traditional Korean back-strap loom to the treadle loom in the 1930s- to 1940s. Fifth, since the 1970s, the hemp textile output levels of Gurye have been reduced due to the westernization of clothing styles, the inflow of Chinese hemp fiber and government regulations pertaining to hemp cultivation.

• The Research Journal of the Costume Culture
• /
• v.24 no.4
• /
• pp.471-482
• /
• 2016

This study investigated the characteristics of cotton production of Damyang-gun & Hwasun-gun, Yeongsan River compared with that of Gurye-gun, Seomjingang River in modern times. To do this, research method was both literature and fieldwork research, results were as follows. First, as for cotton fiber cultivation in Damyang-gun & Hwasun-gun, Chinese cotton (在來綿) has been cultivated during Japanese Colonial era unlike Gurye-gun. Especially, Yellow cotton (黃綿) has been cultivated in Hwasungun. Second, as for spinning in Damyang-gun, Hwasun-gun and Gurye-gun, some of cotton spinning process have been gradually changed to mechanization by market shop equipped with mechanized cotton gin and cotton whipping tool since Japanese colonial era. Third, the loom types also, like spinning tools, have been changed from the traditional Korean back-strap loom to the treadle loom in Damyang-gun, Hwasungun and Gurye-gun. Chemical dyeing with chemical dyestuff also has been done since Japanese Colonial era. Fourth, since the 1970s, the outputs of cotton production have been reduced in both Damyang-gun & Hwasun-gun. For Damyang-gun, this has been connected with bamboo craft since the Joseon Dynasty period. So, Damyang-gun has more concentrated on bamboo craft than cotton production. For Hwasun-gun, since Japanese Colonial era, sericulture has been very important. So, Hwasun-gun also has more concentrated on sericulture than cotton production. The main reason to discontinue cotton production in Damyang-gun, Hwasun-gun and Gurye-gun was related to the local choice like economic added value.