• Journal of the Ergonomics Society of Korea
• /
• v.30 no.3
• /
• pp.427-435
• /
• 2011

Objective: The objective of this study was to evaluate a work of building cleaners using the ergonomic methods. Background: Previous studies about cleaning worker describe typical physical demands of this work. They found that the most significant risk factors associated with the physical work of cleaners are static loads and repetitive movements and high output of force. Method: A head of ergonomics estimation was work analysis(define of combined task, work tool, work time and frequency of combined task) and posture analysis of worker. Results: The results showed that combined task of building cleaners was classification sweeping, mopping(wet), mopping(oil), moving barrels/carts, dumping trash bags, scrubbing, arrangement of cleaning tool, arrangement of circumferential, moving of cleaning tool, and waiting. The work time of combined task such as mopping(wet) and scrubbing indicated high ratio. The posture analysis of building cleaners indicated high value in bending of the head, lower arm, and hands. Conclusion: The findings appear to indicate that building cleaner were related to high risk of work-related musculoskeletal disorders. So, building cleaner would be required an interventional strategy, improvement of cleaning tools and working environment. Application: If ergonomics rule can be integrated into existing cleaning tools and work environments, the risk of occupational injuries will be reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.1-8
• /
• 2018

This paper describes new communication methods for transmitting torque commands between the vehicle controller that determines the amount of power generation in a range-extended electric vehicle and the engine controller that performs it. Generally, vehicles use CAN communication, but in this case, the hardware and software of the existing engine controller must be modified. For this reason, it is not easy to apply CAN communication to small and medium sized automotive reorganize companies. Therefore, this research presents a pin-pin communication method for applying the existing mass produced engine controller to range-extended electric vehicles. The pin-pin communication method converts the driver's demand torque control map inside an mass produced engine controller into a virtual accelerator opening position according to the target speed and target torque of the engine, and converts this to a voltage signal for the existing mass produced engine controller to recognize it. The virtual accelerator opening positions are mounted in the form of a control map in the vehicle controller through the reverse conversion process in an offline environment and are determined by the engine generating power requirements and engine optimal operating point algorithm. These algorithms and signal conversion circuits for engine torque transmission have been mounted on the vehicle controller to conduct the virtual accelerator opening position conversion process according to the engine target torque and to establish the virtual accelerator voltage signal using the signal converter.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.4
• /
• pp.63-72
• /
• 2024

The size of the home interior market is growing rapidly as interest in interiors and self-interiors has increased due to the recent rapid increase in single-person households. Most of the Bathroom remodeling is done by requesting an offline interior contractor and then visually checking it in the final completion stage, so it is not easy to re-construct even if the customer is dissatisfied. Therefore, this study developed an immersive virtual reality-based Bathroom self-remodeling system that can visually check space and design from the design stage to the final stage by incorporating VR technology to feel realistic in virtual reality. The bathroom structure may select the basic structure of the predefined bathroom space or freely set the size of the bathroom space. For furniture items, you can choose the washbasin, toilet, bathtub, shower booth that are essential elements of the bathroom and others(mounting rack, trash bin, handle). The tile texture may change the texture of the selected tile at a desired wall position by selecting various textures. In particular,, the texture of the wall tile can be varied by selecting horizontal, vertical and inclined directions at the desired angle according to the needs of the user and the contractor. As a future research project, this system will enable indoor sharing between users who are physically far away in real-time, allowing direct experience in virtual spaces, connection to purchases, and request estimates.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.128-132
• /
• 2010

Purpose: Nuclear medicine general operation room is radioactive control room which is used for the handling of radioisotope(R.I). Radioactive contamination materials must be under control and separated from general trash. With this experiments, we want to actively suggest the guideline of controling and operating radioactive contamination materials by measuring contamination degree and analyzing the causes which is not realized so far. Materials and Methods: Materials are selected from Oct. 2009 to March. 2010. salines which are used for labelling radiophamaceuticals and generator cap, saline needle cap, $^{99m}Tc$-needle cap saline vial which is generated from $^{99}Mo$/$^{99m}Tc$ generator. After measuring each surface contamination degree by survey meter, mean value and standard deviation one were solved out. Results: In result, After measuring surface contamination degree, radioactivity of saline for labelling radiophamaceuticals showed $14429{\pm}26378$ cpm (p<0.05) and in measured generators, foreign imported things showed that generator cap : $9{\pm}21$ cpm, saline vial : $17{\pm}28$ cpm. saline needle cap : $35{\pm}66$ cpm, $^{99m}Tc$-needle cap : $9{\pm}21$ cpm, saline vial $13{\pm}28$ cpm. domestic things showed that generator cap : $22852{\pm}52545$ cpm, saline needle cap : $87367{\pm}109711$ cpm, $^{99m}Tc$-needle cap : $9008{\pm}10459$ cpm, saline vial : $186416{\pm}158196$ cpm (p<0.05). Conclusion: The saline which is used for labelling, exceeded 1/10 of maximum permissible range. this is generated from radiophamaceuticals dilution procedure. and In generators, radioactive value of foreign import things showed closely background value. but which of domestic thing showed that exceeded more than 1000 values 1/10 of maximum permissible range. the causes of that is domestic generator is contaminated in manufacturing procedure. So, to dispose radioactive contamination materials which is could betaken out of, the control and operation must be radical under controlled by radioactive measuring, recording and equipping of its own. if this is kept well, we can prevent surely that radioactive waste could be disposed like as general trash.

• Korean Journal of Environment and Ecology
• /
• v.26 no.3
• /
• pp.454-462
• /
• 2012

This study was to research the effective use of green rooftop space, facilities and gardening, targeting members from community rehabilitation centers with disabilities. The three community rehabilitation centers studied were, Namyangju Center located in a rural area, Seoul Center located in a urban area and Siheung Center located in both a rural and urban area. We analyzed the difference in preference on the basis of each local community area. In fact, it indicated that 50% of each center knew about the green rooftop at their facilities and its use as a place for taking walks and conversation. It also showed that there was the high preference for priority objects such as a bench, pergola and trash can. Also the preference for natural visualizations like herbal or ornamental plants. The study showed a high preference to a small vegetable plot, hands on gardening and ecological wetland. It also indicated that there was a high preference for experience in nature programs on the rooftops (28.9 %) versus the rate of horticultural programs (27%). Therefore, it proves that the composition of a green rooftop at a community rehabilitation center should be differentiated so that the green rooftop can be a place not only for resting, but also great for a natural learning experience and gardening therapy for people with disabilities.

• (The)Study of the Eastern Classic
• /
• no.63
• /
• pp.169-193
• /
• 2016

This thesis aims at examining the world of pacification in Zhuzi(朱子)'s Daxuezhangju("大學章句"). He said that it was necessary to understand others through Xiejuzhidao(?矩之道) as Shu(恕) for the completion of pacification. The Shu(恕) in it is not an active one but a passive one. It's because one doesn't need to be very active in order to realize the world of pacification. Too much initiative can rather cause loss. Then Shijing("詩經") was quoted, all of which told about that it should be properly followed to understand others through Xiejuzhidao(?矩之道) as Shu(恕). Zhuzi(朱子) explains the reasons for frugality. The modern society is a capitalistic. Yet, not all kinds of capitalism are right. Think about the trash island on the Pacific Ocean. In Daxuezhangju("大學章句"), frugality is suggested as a good way. As the way of frugality, the most important goal of a king is to get rid of the vassals who exploit people. And at the last part, there's warning that petty and crafty men should be appointed. It says that even when everything has been fulfilled, if a petty and crafty man is appointed to take charge of it, the nation can be lost, so a king must give noble men important positions. The world of pacification in Daxuezhangju("大學章句") has not been studied as much as Gewuzhizhi(格物致知). This thesis is expected to offer the chance for more researches on it.

• Journal of the Korean Home Economics Association
• /
• v.41 no.10 s.188
• /
• pp.101-116
• /
• 2003

The study was conducted to establish hygienic standards of salad items for pizza restaurant located in Seoul by applying HACCP system during the summer of 2000. The study measured temperature, time, pH, Aw and microbial assessments. The hygienic conditions of the kitchen and workers were on the average(1.21, 1.0 out of 3 pts.), but some improvement should be made: separate use of trash can and leftover disposal, separate use of knives and cutting boards, habits for hand washing and wearing hygienic gloves. For salad production, all procedures were peformed under food safety danger zone ($5{\~}60^{\circ}C$). The ingredients were mostly above pH 5.0 and high in Aw($0.94{\~}0.99$). Microbial assessments for salad production revealed that TPC($1.8{\times}10^3{\~}1.0{\times}10^{10}CFU/g$) and coliforms($1.5{\times}10{\~}5.2{\times}10^5 CFU/g$) exceeded the standards by Solberg et al.(TPC: $10^6CFU/g$, coliforms: $10^3CFU/g$). S. aureus was not detected but Salmonella was found in three food items(egg, macaroni and macaroni salad). Moreover, the workers' hands contained 3.1 104 CFU/g of TPC and 4.2 102 CFU/g of S. aureus requiring further remedy since it exceeded the safety standards suggested by Harrigan and McCance (500 CFU/g of TPC per $100cm^2$ and 10 CFU/g of coliforms per $100cm^2$). According to the critical control point(CCP) decision tree analysis, vegetable receiving, vegetable holding, mixing, display on coleslaw, macaroni draining, display on macaroni salad, egg peeling & cutting, apple cutting, and display on salad bar were determined as CCPs. From the findings it would be suggested that purchase of Quality materials, short holding and display time, storing food at right temperature, using sanitary cooking utensils, and improvement of workers' food handing practices are needed to ensure the safe salad production in this specific pizza restaurant.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.3 s.3
• /
• pp.108-115
• /
• 2000

The average height of buildings in most cities is increasing in an effort to more effectively use land. In addition, as construction technology develops, rapid construction methods have been pursued. However, while there have been great strides in construction technology, the development of a temporary structure that can support the high-rise building under construction and the rapid construction methods has been relatively limited. If the temporary structure is not built on an outer wall of a building being constructed, a worker may be injured or killed in a fall and building materials such as blocks and other objects may fall to the ground, causing the build-up of trash around the building and possible injuries to persons in proximity to the building. This paper proposes a Self Climbing Safety Fence for construction building(SCfence). SCfence was developed to solve the above problems, a tent has been setup to cover the outer wall of the building, or a falling preventing net has been pitched in a direction perpendicular to the outer wall of the building. A case study was performed to verify the validity of SCfence through comparing the safety and cost experience between SCfence and the existing method.

• Economic and Environmental Geology
• /
• v.31 no.1
• /
• pp.59-68
• /
• 1998

Gravity, magnetic and VLF surveys were carried out to investigate the dimension, nature and stability of the waste materials filled in the Seokdae landfill, Pusan. The Seokdae landfill, which is located in a former valley, was used as a dump for mainly domestic-type waste materials for 6 years from 1987. The landfill site is classfied into A, B, C and D areas according to the sequence of dumping period. The Bouguer gravity anomaly map shows maximum variation of 3.1 mgals on the landfill and its general appearance has close relation with the thickness of waste filled. The local variation of anomaly, however, reflect the degree of compactness of waste materials which may be affected by the nature of waste and dumping time. In the case of area A, where dumping process was terminated at the very last stage, most part show negative anomaly compared to other areas. We think that the composition of the waste materials in the area A is high in leftover food and paper trash and they are still in uncompacted condition. In area B, the general trend of variation of gravity anomaly is appeared to be high anomaly in northern part and decrease to the southern part. This is well matched with the prelandfill topography of the landfill site. The southern part of area B is located in the center of valley and its present surface is comparatively rugged, which may be due to the differential settlement of deep burried waste. The thickness of waste in area C is relatively thin, but the gravity anomaly appears to be low. Considering the present condition of surface, it can be inferred that low density wastes such as leftover food were mainly filled in this area. Area D, as in the case of area B, shows gravity anomaly that has close relation with the prelandfill topography. Magnetic data show the variation of total field intensity varies in the range of 46600~51000 nT, and reach maximum anomaly of 4400 nT. The overall pattern of magnetic anomaly well reflects the distribution of magnetic materials in the landfill. The result of VLF survey reveals several low resistivity zones, which may serve as underground passages for contaminant flow, in the area C located near the small Village.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2B
• /
• pp.179-186
• /
• 2006

Effective interception area of street grate inlets was decreased by clogging with trash, debris, and sand. It also decreased the interception capability of grate inlets and increased the inundation area in street. Therefore, it is necessary to analyze the clogging characteristics and interception capability change by clogging for appropriate design and management of grate inlets. Hydraulic experimental apparatus which can be changed the gutter transverse slopes, longitudinal slopes of street and clogging condition of grate inlet ($40{\times}50cm$) was installed for this study. 81 total experiments were conducted with 8 different clogging condition. The interception capacities of grate inlets clogged curb direction are smaller than those of clogged flow direction. As the longitudinal slopes of street increase, the interception capacity of grate inlet decreases due to splash-over phenomena. This is also observed at grate inlets which has no clogging condition. In general, 50% of clogging factor was selected in design of grate inlet in foreign country. The clogging factor for same clogging condition are suggested 0.25~0.65 in domestic urban area.