• Journal of Korea Water Resources Association
• /
• v.52 no.4
• /
• pp.255-264
• /
• 2019

The trapezoidal ribs had been installed in the retaining wall in order to reduce to flood damage in the impingement of mountain rivers. In this study, experiments in open channel with the trapezoidal ribs on sidewall were conducted to evaluate the effect of flow resistance by the trapezoidal shape. The hydraulic flow characteristics according to the flow rates were surveyed where the wall roughness is k-type that dimensionless spacings, ${\lambda}_{nv}$, are 6, 9, and 12. The flow-resistance factors such as roughness and friction coefficients increased generally with increase of the spacing of ribs. In high flow rate the friction coefficient showed the maximum value when ${\lambda}_{nv}$ is 9. Though the trapezoidal ribs has the relatively smaller flow resistance compared to the square ribs, their form drag accounted for mean 62% of the total flow resistance. It was confirmed that the optimal spacing of trapezoidal ribs to maximize the effect of flow resistance as the wall roughness increases are 9 to 12 times of the height of trapezoidal ribs.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.5
• /
• pp.1211-1219
• /
• 1995

An upper bound elemental technique (UBET) program has been developed to analyze forging load, die-cavity filling and effective strain distribution for flash and flashless forgings. The simulation for flash and flashless forgings are applied axisy mmetric and plane-strain closed-die forging with rib-web type cavity. Inverse triangular and inverse trapezoidal elements are used to analyze flashless forging. The analysis is described for merit of flashless precision forging. Experiments have been carried out with pure plasticine billets at room temperature. Theoretical predictions of the forging load and the flow pattern are in good agreement with experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.837-841
• /
• 1997

An upper bound elemental technique(UBET) program has been developed to analyze forging load, die-cavity filling and optimum kinematically admissible velocity fields for flashless forging. The simulation for flashless forgings are applied plane and axisymmetric closed-die forging with rib-web type cavity. The kinematically admissible velocity fields for inverse triangular and inverse trapezoidal elements, are used to analyze flashless forging. Experiments have been carried out with pure plasticine billets at room temperature. Theoretical predictions of the forging load in plane-strain and axisymmetric forging are in good agreement with experimental results.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.3
• /
• pp.379-388
• /
• 1999

Au upper bound elemental technique(UBET) program has been developed to analyze forging load die-cavity filling and optimum kinematically admissible velocity fields for flashless forging. The simulation for flashless forgings are applied plane-strain and axisymmetric closed-die forging with rib-web type cavity. The kinematically admissible velocity fields for inverse triangular and inverse trapezoidal elements are used to analyze flashless forging,. Experiments have been carried out with pure plasticine billets at room temperature. Theoretical predictions of the forging load in plane-strain and axisymmetric forging are in good agreement with experimental results.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.605-615
• /
• 2014

The purpose of this study is to propose an economic new type rib by applying plate stiffening methods of the corrugated plate and the honey-comb sandwich panel to the steel deck plate and comparing the new type rib with existing open and closed ribs. The trapezoidal corrugated type, ㄹ type, honey-comb type and ㅁ type ribs are considered as new type ribs and the moment and the steel volume are compared with that of open ribs and closed ribs. The results shows that the honey-comb type and ㅁ type ribs are good in aspects of economic feasibility and the ㅁ type is better than the honey-comb type. To make the ㅁ type rib applicable to the steel deck plate, the sensitivity analysis and parametric study are performed and the system to select the proper section under the particular stress condition is established. The closed rib of real bridges is compared with the ㅁ type rib of the proposed system and it is known that the new type rib is more economic. Therefore, more economic steel deck plates can be achieved by using the system proposed in this study for the plate stiffened with the new ㅁ type rib.

• Steel and Composite Structures
• /
• v.35 no.4
• /
• pp.475-494
• /
• 2020

Presented are experimental results from 24 full-scale push test specimens to study the behaviour of composite beams with trapezoidal profiled sheeting laid transverse to the beam axis. The tests use a single-sided horizontal push test setup and are divided into two series. First series contained shear loading only and the second had normal load besides shear load. Four parameters are studied: the effect of wire mesh position and number of its layers, placing a reinforcing bar at the bottom flange of the deck, normal load and its position, and shear stud layout. The results indicate that positioning mesh on top of the deck flange or 30 mm from top of the concrete slab does not affect the stud's strength and ductility. Thus, existing industry practice of locating the mesh at a nominal cover from top of the concrete slab and Eurocode 4 requirement of placing mesh 30 mm below the stud's head are both acceptable. Double mesh layer resulted in 17% increase in stud strength for push tests with single stud per rib. Placing a T16 bar at the bottom of the deck rib did not affect shear stud behaviour. The normal load resulted in 40% and 23% increase in stud strength for single and double studs per rib. Use of studs only in the middle three ribs out of five increased the strength by 23% compared to the layout with studs in first four ribs. Eurocode 4 and Johnson and Yuan equations predicted well the stud strength for single stud/rib tests without normal load, with estimations within 10% of the characteristic experimental load. These equations highly under-estimated the stud capacity, by about 40-50%, for tests with normal load. AISC 360-16 generally over-estimated the stud capacity, except for single stud/rib push tests with normal load. Nellinger equations precisely predicted the stud resistance for push tests with normal load, with ratio of experimental over predicted load as 0.99 and coefficient of variation of about 8%. But, Nellinger method over-estimated the stud capacity by about 20% in push tests with single studs without normal load.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.235-235
• /
• 2018

홍수 시의 산지하천 만곡부는 2차류 발생과 편수위 상승에 따른 하상세굴 및 홍수범람 위험이 크다. 만곡부 외측에 주로 설치되어 있는 콘크리트 옹벽호안은 표면이 매끄러워 홍수피해를 가중 시킨다. 이러한 피해를 저감시키기 위해 콘크리트 옹벽에 돌출줄눈을 설치하여 유속조감 및 설치효과를 분석한 바 있다. 본 연구에서는 기존에 제안된 직사각형 단면의 돌출줄눈보다 내구성을 추구한 사다리꼴 단면의 돌출줄눈을 제시하여 수리모형 실험을 수행하였다. 수리모형 실험은 개수로 직선수로에서 수로경사 0.0035 조건에서 수로 출구 게이트를 조절하면서 이루어졌다. 모형 돌출줄눈의 조도높이는 3cm로 하였으며, 사다리꼴 밑각은 $45^{\circ}$로 완만한 경우이다. 설치간격은 무차원 돌출줄눈 간격을 기준으로 ?형 조도인 6으로 하였다. 돌출줄눈의 설치 유무에 따라 유량에 따른 수위를 측정하고 유속을 산정하여, 마찰저항의 변화를 파악하였다. 공급유량에 따른 Froude 수는 0.168~0.359 범위였으며, 유량이 증가에 따라 Manning의 조도계수는 감소하였다. Froude 수가 0.25보다 큰 경우 돌출줄눈설치의 조도계수가 미설치보다 큰 것으로 파악되었다. 그러나 사다리꼴 돌출줄눈의 흐름저항효과는 직사각형 돌출줄눈에 비해 상대적으로 작았다. 수로 횡단면의 수위분포에 따르면, 돌출줄눈 설치 측벽 주변에서 흐름저항에 따른 유속감소와 수위상승 효과가 나타나는 것으로 파악되었다. 이번 사다리꼴 돌출줄눈은 흐름저항 효과가 크지 않았기 때문에 사다리꼴 밑각을 조정하여 새로운 단면에 대한 추가적인 실험이 필요할 것으로 보인다.