• 제목/요약/키워드: Trap efficiency

검색결과 166건 처리시간 0.028초

Urea 수용액의 배기가스 유동장내 분무 특성과 분무 균일도에 관한 연구 (A Study on the Characteristic and Droplet Uniformity of Spray Injection to Exhaust Gas Flow from Urea Solution Injector)

  • 오정모;차원심;김기범;이진하;이기형
    • 한국자동차공학회논문집
    • /
    • 제19권3호
    • /
    • pp.83-89
    • /
    • 2011
  • Diesel engines can produce higher fuel efficiency and lower $CO_2$ emission, they are subject to ever more stringent emission regulation. However, there are two major emission concerns fo diesel engines like such as particulate matter (PM) and nitrogen oxides (NOx). Moreover, it is not easy to satisfy the regulations on the emission of NOx and PM, which are getting more strengthened. One of the solutions is to apply the new combustion concept using multistage injection such as HCCI and PCCI. The other solution is to apply after-treatment systems. For example, lean NOx trap catalyst, Urea-SCR and others have various advantages and disadvantages Especially, Urea-SCR system have advantages such as a high conversion efficiency and a wide operation conditions. Hence the key factor to implementation of Urea-SCR technology, good mixing of urea(Ammonia) and gas, reducing Ammonia slip. Urea mixer components are required to facilitate evaporation and mixing because the liquid state of urea poses significant barriers for evaporation, and the distance to mixer is the most critical that affect mixer performance. In this study, to find out the distance from injector to mixer and simulation factor, a laser diagnostics and high speed camera are used to analyze urea injector spray characteristics and to present a distribution of urea solution in transparent manifold In addition, Droplet Uniformity Index is calculated from the acquired images by using image processing method to clarify the distribution of spray.

진양호에서 생태계 건강성평가를 위한 예비조사로서 어류채집도구별 종조성 분석 (Analysis of Fish Fauna by Sampling Gear as a Preliminary Survey for Ecosystem Health Assessments in Jinyang Reservoir)

  • 한정호;안광국
    • 생태와환경
    • /
    • 제43권1호
    • /
    • pp.103-116
    • /
    • 2010
  • 본 연구는 현재 국내 호수에서 사용되는 어구들(Sampling gears) 중 어류를 이용한 호수생태계의 건강성 평가에 적용할 수 있는 어구를 선정하기 위하여 각 어구별 채집 효율성을 분석하였다. 이를 위하여 진양호를 대상으로 2008년 11월과 2009년 6월 2회에 걸쳐서 어류조사를 실시하였다. 조사에 사용된 어구는 외통발(FN), 자망(GN), 삼중자망(TN), 투망(CN), 통발(MT), 족대(KN) 등 6개의 어구를 사용하였다. 진양호에서 채집된 총 어류는 1차 조사에서 20종의 4,149개체로 나타났으며, 2차 조사에서 27종의 3,364개체로 나타나 동절기(11월)인 1차 조사에 비하여 하절기(6월)에서 더 많은 종이 출현한 것으로 나타나 1, 2차 조사 결과, 총 어류는 29종의 7,513개체가 채집되었다. 어구별로 채집된 어종을 분석한 결과, 투망(CN)이 28종 3,567개체가 채집되었으며, 정치망(FN)이 15종 3,108개체, 삼중자망(TN)이 14종 577개체, 자망(GN)이 7종 107개체, 통발(MT)이 6종 59개체, 족대(KN)가 5종 95개체가 채집되어 투망이 총 및 개체수에서 가장 많이 채집된 것으로 나타났다. 어류채집도구별 다변량분산분석(MANOVA) 결과, 각 어구마다 채집되는 종수에 차이가 있는 것으로 나타났으며, 이중 CN을 이용한 다른 채집도구들에 비해서 가장 효율적인 것으로 분석되었다. 반면, MT과 KN이 어류채집 시 가장 낮은 효율성을 보이는 것으로 나타났다. 또한 유사도 분석에서도 CN이 전체 채집된 어류 자료와 95% 정도의 유사도를 보였으며, MT, GN, TN, KN으로 채집된 어류는 유연관계가 적은 것으로 나타났다. 본 연구는 호수생태계에서 어류조사도구별 효율성에 대한 예비연구로서 검증을 위해 향후 여러 호수에 대한 더 많은 연구가 뒷받침되어야 할 것으로 사료된다.

해수 염기 침투방지를 위한 성능개선 형 물배출 앵커 및 트랩볼트 개발에 관한 연구 (Developing an improved water discharge anchor & trap bolt to prevent basic salt penetration to harbor structures)

  • 옥종호;문상덕;이화선;신경수
    • 한국산학기술학회논문지
    • /
    • 제19권4호
    • /
    • pp.674-682
    • /
    • 2018
  • 노후된 철근콘크리트 항만 구조물을 보수보강하기 위한 기존의 공법 대부분은 염기침투와 균열발생을 막기 위한 목적으로 개발되었으며 슬래브나 보 하부를 섬유복합체나 섬유복합체 패널로 벽지 바르듯 빈틈없이 접착시키는 공정으로 이루어져 있다. 하지만 이런 공법들은 섬유제품의 밀폐성 때문에 항만구조물 상부에서 유입되는 빗물 등의 수분을 외부로 배출시키지 못한다. 배출되지 않은 물은 보수보강 부위를 물통역할을 하게 되어 슬래브나 보의 피복콘크리트 전체를 탈락시키는 문제를 발생케 한다. 이에 본 연구진은 선행연구에서 콘크리트 구조물 내부로 유입된 수분을 배출하는 물배출 앵커 및 트랩볼트를 개발하였다. 하지만 앵커볼트의 매입부분의 수분은 배출되지 않아 잔류수분 문제가 발생하였다. 본 연구에서는 이런 잔류수분 문제를 해결하기 위해 기 개발된 물배출 앵커 및 트랩볼트 측면에 홀을 추가로 천공하는 여러 대안을 제시하였다. 또한 보수보강 현장에서 물배출 앵커를 적용할 경우 앵커의 설계하중 적용을 위해 인장강도시험, 인발강도시험을 수행하였고, 배수성능시험을 통해 최적의 성능개선 형 물배출 앵커 및 트랩볼트를 개발하였다.

모수, 비모수, 베이지안 출산율 모형을 활용한 합계출산율 예측과 비교 (A comparison and prediction of total fertility rate using parametric, non-parametric, and Bayesian model)

  • 오진호
    • 응용통계연구
    • /
    • 제31권6호
    • /
    • pp.677-692
    • /
    • 2018
  • 최근 2017년 우리나라 합계출산율은 1.05명로 2005년 1.08명 수준으로 회귀하는 현상을 보이고 있다. 1.05명은 인구대체선(2.1명), 안전선(1.5명)과도 거리가 먼 초저출산 수준이고 마치 초저출산 덫에 빠질 우려가 있다. 이에 합계출산율의 합리적인 예측과 이를 통한 출산정책에 유용한 자료를 제공하는 것은 그 어느 때 보다도 중요하다. 그 동안 다양한 통계적 방법으로 합계출산율 추이를 예측하였는데, 데이터 완비성이 높고 품질이 좋은 경우 모형 접근인 모수적 방법, 데이터 추이가 단절되거나 변동이 심한 경우 평활과 가중치를 적용한 비모수적 방법, 데이터 부족과 품질 등으로 선진국의 출산율 3단계 전이현상을 참고하여 이들의 사전분포를 활용하는 베이지안 방법 등이 적용되어 왔다. 본 연구는 최근 변동이 심한 우리나라 출산율에 모수, 비모수, 그리고 베이지안 방법을 적용하여 추정과 예측을 실시하고 도출된 결과 비교를 통해 적합성과 타당성 측면에서 어떤 방법이 합리적인지 모색하고자 한다. 분석결과 합계출산율 예측값 순위는 통계청 합계출산율이 가장 높고, 베이지안, 모수, 비모수 순으로 나타났다. 2017년 TFR 1.05명 수준을 감안할 때 모수, 비모수모형으로 도출된 합계출산율 예측값이 합리적이다. 또한 출산율 자료완비성이 높고 품질이 우수할 경우 계산 효율성과 적합도 관점에서 모수적 추정과 예측 접근 방법이 타 방법보다 우수한 것으로 도출되었다.

Oxalic Acid와 Citric Acid UV/H2O2에 의한 분해특성 조사 (Degradation Characteristics of Oxalic Acid and Citric Acid by UV/H2O2 Oxidation)

  • 하동윤;조순행;최영수;경규석;김동현
    • 대한환경공학회지
    • /
    • 제22권7호
    • /
    • pp.1307-1318
    • /
    • 2000
  • 원자력 발전소에서 발생되는 제염폐수에 함유된 Oxalic acid와 Citric acid를 고급산화방법(Advanced Oxidation Process) 중의 하나인 $UV/H_2O_2$를 적용하여 이들 물질의 분해특성 및 최적처리조건을 파악하고자 하였다. 이를 위하여 각각의 물질에 대하여 $H_2O_2$나 UV를 단독사용할 경우, pH 및 과산화수소의 주입량 변화, Oxalic acid와 Citric acid의 농도변화에 따른 분해특성에 대하여 조사하였다. $H_2O_2$나 UV만으로도 완전분해가 가능한 반면 Citric acid는 같은 파장의 UV만으로는 분해가 잘되지 않는 것으로 조사되었다. 또한 과산화수소와는 두 물질 모두 반응성이 없는 것으로 조사되었다. 산화공정에서 반응속도상수, 반응시간, 제거효율, 과산화수소 소모량 등에 대한 결과를 종합한 결과 Oxalic acid의 경우 pH 4 이하의 낮은 pH에서, Citric acid는 pH 4~6 정도의 약산성 부근에서 높은 분해효율을 나타내는 것으로 조사되었다. 최적 pH에서는 과산화수소의 주입량이 증가할수록 두 물질 모두 제거효율이 증가하는 것으로 조사되었으나 과산화수소의 주입량이 200 mg/L 이상을 초과하는 경우에는 과산화수소에 의한 OH radical trap에 의하여 제거효율이 감소하는 것으로 조사되었다. 이상의 결과 $UV/H_2O_2$ 광분해에 의한 Oxalic acid와 Citric acid의 처리시 pH 4에서 과산화수소 주입량 200 mg/L일 경우 가장 효율적인 것으로 조사되었다.

  • PDF

네팔 Modi Khola 수력발전소 수리모형실험 연구 (A Study on the Hydraulic Experiments of Modi Khola Hydroelectric in Nepal)

  • 선우중호;박창근
    • 물과 미래
    • /
    • 제28권1호
    • /
    • pp.107-120
    • /
    • 1995
  • 본 연구는 네팔의 Modi Khola 강 유역에 건설되는 Modi Khola 수력발전소의 취수구 구조물 및 침사지 구조물에 대한 수리모형실험 연구이다. 취수구 구조물은 축척이 1:20인 정상모형으로, 침사지 구조물은 수직방향 축척이 1:10, 수평방향 축척이 1:15인 왜곡모형으로 제작되었다. 본 실험에서는 이동상 모형이론에 의해 'Anthracite'($\rho_s$ =1.48)를 모형사로 선택하였다. 실험결과 취수구 구조물 부분에서는 세사영역의 유사퇴적을 막기 위해 적정한 높이의 guide wall 설치가 바람직하며, 효율적 배사를 위해 배사수문의 적절한 조작이 필요한 것으로 나타났다. 침사지 구조물 부분에서는 효율적인 침사를 위해 침사지내의 난류호흡을 억제시키는 설계가 요구되었고, 침사지내 퇴사를 처리하기 위하여 설치된 유출구측의 배사 파이프는 침사지 전영역의 배사를 효율적으로 수행하지 못하였으므로 최대 퇴사가 발생하는 지점 근처에 추가로 배사 파이프를 설치하는 것이 바람직하다. 또한 침사효율은 평균 약 95%로 관측되었는데, 비교적 좋은 침사지 설계라 판단된다.

  • PDF

TCO 응용을 위한 패턴된 기판위에 증착된 AZO 박막의 특성 연구 (Conformal coating of Al-doped ZnO thin film on micro-column patterned substrate for TCO)

  • 최미경;안철현;공보현;조형균
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.28-28
    • /
    • 2009
  • Fabrications of antireflection structures on solar cell were investigated to trap the light and to improve quantum efficiency. Introductions of patterned substrate or textured layer for Si solar cell were performed to prevent reflectance and to increase the path length of incoming light. However, it is difficult to deposit conformally flat electrode on perpendicular plane. ZnO is II-VI compound semiconductor and well-known wide band-gap material. It has similar electrical and optical properties as ITO, but it is nontoxic and stable. In this study, Al-doped ZnO thin films are deposited as transparent electrode by atomic layer deposition method to coat on Si substrate with micro-scale structures. The deposited AZO layer is flatted on horizontal plane as well as perpendicular one with conformal 200 nm thickness. The carrier concentration, mobility and resistivity of deposited AZO thin film on glass substrate were measured $1.4\times10^{20}cm^{-3}$, $93.3cm^2/Vs$, $4.732\times10^{-4}{\Omega}cm$ with high transmittance over 80%. The AZO films were coated with polyimide and performed selective polyimide stripping on head of column by reactive ion etching to measure resistance along columns surface. Current between the micro-columns flows onto the perpendicular plane of deposited AZO film with low resistance.

  • PDF

생분해문어단지의 제작과 Polyethylene (PE) 문어단지와의 어획 비교 (Development of the biodegradable octopus pot and its catch ability comparison with a Polyethylene (PE) pot)

  • 차봉진;이건호;박성욱;조삼광;임지현
    • 수산해양기술연구
    • /
    • 제47권1호
    • /
    • pp.10-17
    • /
    • 2011
  • Biodegradable octopus pot was developed to reduce plastic pollution problem in the sea and fishing trouble between fishermen. It can be expect to recycle other wasted biodegrade fishing gear. Experimental fishing was carried out to understand the difference in fishing efficiency between Polyethylene (PE) octopus pots and biodegradable (Polybutylene Succinate and Polybutylene adipate-co-terephthalate) octopus pots which was tried to make in this study in the sea. There were caught by 237 numbers of fishing during the experimental period. Among the 237 numbers of fishing, 160 or 67.5% were PE pots which were more than the biodegradable pots. A comparison of the monthly catches between the PE pots and biodegradable pots shows that the catches were overall higher in the PE pots than in the other pots. The result is very similar with the comparison of total catches by each type of the pots. In terms of bycatch, the number of species, amount of catches and the number of fishing with bycatch were more significant in the biodegradable pots than in the PE pots.

남한 토양에서 곤충병원성 선충의 분리 (Isolating Entomopathogenic Nematode in South Korea)

  • 한상미;한명세
    • The Korean Journal of Ecology
    • /
    • 제22권5호
    • /
    • pp.255-263
    • /
    • 1999
  • 곤충병원성 선충의 효율적 검색법 확립과 생물적 방제제로서 유용한 선충 종의 탐색을 위하여 수행된 연구로서 남한 각지의 다양한 생태환경에서 토양을 채집하고, 병원성 검정과 병행하여, 감염력과 증식력 및 보존력이 강한 계통을 선발하였으며, 각종 해충에 대한 살충력을 검정하여 생물적 방제제로서의 유용성을 시험하였다. 우리나라에서 검출된 곤충병원성 선충은 주로 Rhbditida에 속하는 Steinermatidae 및 1 Heterorhabditidae였으며, 본 연구에서도 Rhabditida의 선충이 다수를 차지하는 경향은 같았다. 그러나, Rhabditidae에서는 현재까지 알려진 Steinernematidae와 Heterorhabditidae외에도 19계통의 Rhabditidae와 2 계통의 Diplogasteridae가 새로 검출되었고, Tylenchida에 속하는 선충도 5계통이 발견되었으며, 금후 속 및 종 단위의 상세한 동정이 필요할 것이다. 병원성이 우수한 선충계통은 생존 유충과 번데기에서 개체당 20만∼30만 마리가 증식하였으므로, 증식용 숙주 1마리 분의 병원체로 구제가능한 해충의 이론치는 십만을 초월할 것으로 추산되었다. 선발 계통의 선충은 대부분 통성활물기생이며, 능동적인 숙주의 추적 및 감염치사한 사체에서 증식함은 "적극적 사물기생" 또는 "살생부생성"으로 간주할 수도 있었다. 본 연구는 생물살충제 연구를 위한 생태환경기술 개발에 필요한 자료를 제공할 뿐 아니라, 기초생명과학 연구용 선충 계통의 선발과 증식 및 보존 관리를 비롯하여 널리 활용될 수 있을 것이다.

  • PDF

WO3 피복 석탄회의 광촉매 특성에 미치는 TiO2의 첨가 효과 (Effect of Adding WO3 on Photocatalytic Property of TiO2 Coated Coal Fly Ash)

  • 유연태;김병규
    • 한국재료학회지
    • /
    • 제13권10호
    • /
    • pp.691-696
    • /
    • 2003
  • To improve the photocatalyticactivity of $TiO_2$-coated coal fly ash, tungsten hydroxide was doped by impregnation method and was oxidized by heat treatment in temperature ranges of $WO^{\circ}C$ for 2 hrs. The changes of crystal structure and crystal size of $TiO_2$and $WO_3$on coal fly ash were investigated by X-ray diffraction analysis. The crystal structure of titanium dioxide showed only anatase type and $TiO_2$-$WO_3$ compounds appeared in the heat treatment temperature ranges of $500∼600^{\circ}C$. By adding $V_3$in $TiO_2$coated on fly ash, the growth of crystal size of anatase was restrained and the anatase phase was stabilized in temperature ranges of TEX>$500∼<800^{\circ}C$. And $WO_3$acted as a trap site of electrons excited from anatase by irradiating UV. The maximum removal efficiency of NO gas for $TiO_2$/$WO_3$-coated coal fly ash was 84% and appeared when the ammonium tungstate of $1.3${\times}$10^{-3}$ M was doped and then heated at $600^{\circ}C$ for 2 hrs.