• 한국세라믹학회지
• /
• 제32권11호
• /
• pp.1262-1268
• /
• 1995

Photoelectrochemical properties of p-GaAs electrode have been investigated. I-V characteristic shows that the cathodic photocurrent is observed at -0.7 V vs. SCE. The photoresponse at near 870~880nm wavelength indicates that the photogenerated carriers contibuted to the observed current. The maximum converson efficiency of 35% is obtained for a Xe lamp light source at 400nm. In C-V relation, capacitance peaks appeared at the frequencies of 100Hz and 300Hz due to the activation of the interfacial states which exist at the energy level corresponding to the one-third of the GaAs band gap. The difference of about 1.1V between flatband potential (Vfb) from the Mott-Schottky method and onset voltage from I-V curve is observed due to the trap of carriers at the interfacial states in the boundary between GaAs and electrolyte. In case of WO3 deposited p-GaAs electrode, higher positive onset current and photocurent density are obtained. This can be explained by the fact that carriers are generated by light penetrated into the WO3 thin flm as well as p-GaAs substrate and then move into the electrolyte effectively.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권3호
• /
• pp.234-240
• /
• 1999

This paper presents a new approach for large-scale generator maintenance scheduling optimizations. The generator preventive maintenance scheduling problems are typical discrete dynamic n-dimensional vector optimization ones with several inequality constraints. The considered objective function to be minimized a subset of{{{{ { R}^{n } }}}} space is the variance (i.g., second-order momentum) of operating reserve margin to levelize risk or reliability during a year. By its nature of the objective function, the optimal solution can only be obtained by enumerating all combinatorial states of each variable, a task which leads to computational explosion in real-world maintenance scheduling problems. This paper proposes a new priority search mechanism based on each generator's discrete sensitivity value which was analytically developed in this study. Unlike the conventional capacity-based priority search, it can prevent the local optimal trap to some extents since it changes dynamically the search tree in each iteration. The proposed method have been applied to two test systems (i.g., one is a sample system with 10 generators and the other is a real-world lage scale power system with 280 generators), and the results anre compared with those of the conventional capacith-based search method and combinatorial optimization method to show the efficiency and effectiveness of the algorithm.

• 한국환경보건학회지
• /
• 제33권1호
• /
• pp.36-42
• /
• 2007

Diesel PM can be controlled using Diesel Particulate Filter, which can effectively reduce the level of soot emissions to ambient background levels. In the Heavy Duty Diesel area, the Continuously Regeneration trap has been widely applied in the retrofit market. As the Special act for the improvement of air quality in the capital area, the retrofit program for DPF to used diesel vehicle has progressed favorably and there are currently over 1,000 of these DPF in use in retrofit applications in korea. These DPF comprise a specially formulated Diesel Oxidation Catalyst upstream of a DPF. The $NO_2$ generated by the DOC is used to combust the carbon collected in the DPF at low temperature. To certificate DPF device that is suitable to domestic circumstances, it is necessary to evaluate exactly the DPF devices according to the regulation of DPF certificate test procedure for retrofit(ministry of environment(MOE) announcement NO. 2005-16). To do so the understand of that regulation like the standard of PM reduction rate is needed. In this study the test procedure including test cycle and BPT test condition was examined and also the test result for specific DPF was analyzed. In every test like field test, PM reduction efficiency test and seoul-10 mode test, no defect could be showed.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.899-902
• /
• 2011

본 연구에서는 MicroTec 시뮬레이터를 이용하여 태양전지의 최적화 효율을 얻기 위한 연구를 하고자 한다. 효율은 태양전지의 성능을 나타내는 가장 중요한 인자로서 태양으로부터 입사된 에너지에 대한 출력에너지의 비로 정의된다. 효율은 입사되는 태양광 스펙트럼이나 세기, 그리고 전지의 온도에 영향을 받기도 하므로 태양전지의 변화효율은 정밀하게 조절된 조건에서 측정되어야 한다. 본 연구에서는 온도(200K-300K)와 Trap(트랩) 에너지(0.1eV~1.0eV) 파라미터의 값을 변화하면서 특성을 분석하였다. 그리고 이동도 모델에 따른 전류-전압 특성을 분석하였다. 분석결과에 따른 곡선 인자(Fill factor를) 비교하여 태양전지의 효율을 최적화 할 수 있는 모델을 제시할 것이다.

• 대한조선학회논문집
• /
• 제58권1호
• /
• pp.32-39
• /
• 2021

Korean coastal fishery suffers from profitability degradation due to a decrease in fisheries resources, pollution in coastal waters, fuel coast increase, and market opening for aquaculture products. The next generation Korean fishing vessel aims at the improvement of energy efficiency, enhancement of crew welfare, and safety. These purposes can be accomplished by adopting a new standard hull form with improved resistance performance and a modernized residence facility on the deck. In order to improve resistance performance, this study attempts to optimize design variables for stern flaps for three kinds of fishing vessels - coastal multi-purpose, coastal trap, and dredged nets. A series of model tests for these fishing vessels was carried out in the towing tank of Pusan National University. The results indicate that for some cases, the stern flap caused the stern trim of the vessel to decrease, leading to the resistance reduction.

• 대한화학회지
• /
• 제67권1호
• /
• pp.33-41
• /
• 2023

Nanocrystallne WO₃ and MoO₃ with several different sizes and crystal structures were prepared by simple acid precipitation and subsequent heat treatment. The photochromic (PC) properties of these samples were comparatively investigated in powder state by monitoring diffuse reflectance spectral changes after bandgap irradiation. The PC effect of hexagonal WO₃ and monoclinic WO₃ strongly depended upon crystallite size rather than crystal structure. The smaller the crystallite size, the better the PC effect. However, orthorhombic WO·H₂O and MoO₃ having hexagonal and orthorhombic structures did not follow this trend. One consistent result for all WO₃ and MoO₃ samples is that the heat treatment in air, which changes crystallinity, whether it changes the crystal structure or only the crystallite size, reduces the PC effect. Since the thermal treatment reduces the surface oxygen defect sites, we believe that the PC effect of WO₃ and MoO₃ depends critically on the surface oxygen defect sites that serve as deep trap sites for photogenerated electrons and oxygen radical holes. We also found that the proton insertion claimed by double charge injection model is not critical for the PC effect.

• 수산해양기술연구
• /
• 제41권2호
• /
• pp.95-100
• /
• 2005

In order to improve the gill nets for croaker, Miichthys miiuy which is proper to the fishermen's income ans fisheries resource management, we had studied to the net height of present gill nets (mesh size 160mm, 50 mesh in depth), experimental gill nets-I(mesh size 150mm, 68 mesh in depth) and experimental gill nets-II(mesh size 142mm, 75 mesh in depth) in wter using the gill nets design ans analysis simulation system, and then investigated and analyzed the catch efficiency of each gill nets through the field fishing experiments. The net height of emperimental gill nets-I and experimental gill nets-II in water were estimated respectively about 1.5 times and 1.3 times higher than present gill nets which the net height is about 3.5m as the results of simulation considering the current of fishing fields. Total number of croakers which were caught by the persent gill nets was 62(body length 300~1,200mm), total catch weight was 398.7kg (mean 0.6kg/sheet). Total number of croakers which were caught by the experimental gill nets- I was 68(body length 600~1,100mm), total catch weight was 391.6kg (mean 1.2kg/sheet). Total number of croakers which were caught by the experimental gill nets-II was 28(body length 400~900mm), total catch weight was 99.2kg (mean 0.3kg/sheet).

• 대한기계학회논문집B
• /
• 제34권7호
• /
• pp.689-696
• /
• 2010

디젤엔진은 높은 열효율과 우수한 연비 성능 등의 장점을 가지고 있으나, 기화된 연료와 주변 공기가 혼합된 후 착화되는 과정을 거치기 때문에 이론 공연비 영역에서는 질소산화물(NOx) 배출이 증가되는 문제점을 가지고 있다. 최근 활발히 연구되고 있는 높은 정화 효율을 가진 LNT 촉매는 희박 분위기 조건에서는 NOx를 흡장하게 되고 과농한 분위기에서는 환원 분위기 형성을 통하여 NOx를 저감시키게 된다. 희박 공연비에서 동작하는 디젤 엔진에서는 이러한 환원 과정을 이루기 위해 주기적으로 과농한 분위기를 형성해주어야만 하는데, 이러한 연구는 NOx 저감을 위해 HC를 포함한 환원제의 농도를 제어하는 기술로서 본 연구에서는 디젤을 연료로 하는 수소농후가스 발생장치를 이용하여 LNT 촉매에 환원제로서 수소농후가스를 직접 공급하는 방식으로 LNT 촉매의 NOx 저감 특성을 파악하였다.

• 한국물환경학회지
• /
• 제28권3호
• /
• pp.418-425
• /
• 2012

Dam construction in a river can change its hydrological pattern and trap sediments, which results in ecological changes in the downstream. It is a common phenomenon in the downstream of dams to have decreased sediment flow and increased periphyton. Artificial floods and sediment application are suggested as mitigation practices in order to simulate natural process of flood; transporting sediment and sloughing periphyton off. In this study the effects of artificial floods on periphyton were examined by applying sand artificially and discharging water from a dam (Yangyang Dam, Korea). The study area has been suffering from turbidity problems caused by shore erosion of the dam. The accumulation of inorganic sediments and increase of periphyton on the river bottom are the major factors of habitat deterioration in the downstream reaches. Artificial flood and artificial addition of sand was performed in summer and the effects were measured. Piles of applied sands were washed off easily by discharge and it enhanced the periphyton sloughing effect. The removal efficiency of periphyton was 50 ~ 80% within the 2 km reach from the dam. In conclusion artificial floods and sand application can be a good mitigation measure for the habitat rehabilitation after a dam construction in streams.

• 수산해양기술연구
• /
• 제41권4호
• /
• pp.279-288
• /
• 2005

The mesh selectivity of drum net traps for Buccinum opisoplectum Dall caught in the eastern sea of Korea was described. Several experiments were conducted between July 2003 and March 2004 and the data obtained from the experiment was fitted by SELECT (Share Each Length class's Catch Total) model with unequal fishing and sampling efforts. The selection curve was determined to be 'estimated fishing efficiency' by model deviance rather than AIC. However the fishing efficiency between 20mm and 35mm mesh size did not seem to be different. The $L_{50}$ lengths of the selectivity for the 55mm and 75mm mesh size were 65.4mm and 96.0mm, respectively.