• Korean Journal of Cleft Lip And Palate
• /
• v.8 no.1
• /
• pp.11-22
• /
• 2005

There ate anteroposterior$\cdot$vertical maxillary underdevelopment, transverse maxillary deficiency and wide cleft alveolus$\cdot$oroanual fistula among cleft lip ant palate related maxillary deformities. For treatment of these deformities, ones have used conventional treatment methods, there were often unsatisfactory results to patients and operators both. Since llizarov introduced effective technique of bone lengthening and augmentation for a variety of limb defotmities, application of distraction osteogenesis on maxillofacial area has been used to solve those disadvantages of conventional methods. Authors introduced following three cases about use of distraction osteogenesis. The first case is the application of RED(rigid external distraction) II system for the treatment of the anteroposterior$\cdot$vertical maxillary hypoplasia after several times of surgery and end of development in bilateral cleft lip and palate patient. The second case is the application of the USPD(unilateral segmental palatal distraction) for the resolution of the unilateral posterior crossbite and transverse dental arch asymmetry after alveolorraphy in growing unilateral cleft lip and palate patient. The third case is the application of transport distraction osteogenesis far closure of the wide clef alveolus and oroantral fistula in growing bilateral cleft lip and palate patient. There were satisfactory results in these cases. Particularly, in comparison with the decreases of relapse rates, the reduction of the hospitalization time and post-operative discomfort owing to minimal surgical intervention.

• The korean journal of orthodontics
• /
• v.51 no.3
• /
• pp.145-156
• /
• 2021

Objective: The aim of this retrospective study was to assess the midfacial soft tissue changes following maxillary expansion using micro-implant-supported maxillary skeletal expanders (MSEs) in young adults by cone-beam computerized tomography (CBCT) and to evaluate the correlations between hard and soft tissue changes after MSE usage. Methods: Twenty patients (mean age, 22.4 years; range, 17.6-27.1) with maxillary transverse deficiency treated with MSEs were selected. Mean expansion amount was 6.5 mm. CBCT images taken before and after expansion were superimposed to measure the changes in soft and hard tissue landmarks. Statistical analyses were performed using paired t-test and Pearson's correlation analysis on the basis of the normality of data. Results: Average lateral movement of the cheek points was 1.35 mm (right) and 1.08 mm (left), and that of the alar curvature points was 1.03 mm (right) and 1.02 mm (left). Average forward displacement of the cheek points was 0.59 mm (right) and 0.44 mm (left), and that of the alar curvature points was 0.61 mm (right) and 0.77 mm (left) (p < 0.05). Anterior nasal spine (ANS), posterior nasal spine (PNS), and alveolar bone width showed significant increments (p < 0.05). Changes in the cheek and alar curvature points on both sides significantly correlated with hard tissue changes (p < 0.05). Conclusions: Maxillary expansion using MSEs resulted in significant lateral and forward movements of the soft tissues of cheek and alar curvature points on both sides in young adults and correlated with the maxillary suture opening at the ANS and PNS.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.11.1-11.5
• /
• 2015

Rapid palatal expansion(RPE) with the tooth-born appliance is not sufficient to apply to the patients with periodontal problem or insufficient tooth anchorage, and it leads to tipping of the anchorage teeth and increasing teeth mobility and root resorption. To avoid these disadvantages, we present the case using palatal screws and custommade palatal expander. A 23-year-old patient underwent surgically assisted rapid maxillary expansion with the Hyrax expansion using 4 tent screws. The study models were used to measure the pre-/-post surgical width of the anterior and posterior dental arches with a digital sliding caliper. In the result, the custom-made palatal expander with 4 tent screws is suitable for delivering a force to the mid-palatal suture expansion. And it is low cost, small sized and simply applied. The results indicated that maxillary expansion with the custom-made palatal anchorage device is predictable and stable technique without significant complications in patients.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.25 no.4
• /
• pp.371-374
• /
• 1999

The treatment of adults with dentofacial deformities is frequently complicated by existence of discrepancies in transverse dimension. Control of the transverse dimension through surgical technique is now a valuable treatment consideration in non-growing patients. Proper diagnosis of relative and absolute maxillary transverse deficiency is imperative prior to surgical intervention. Therapeutic purpose should be implemented accordingly to facilitate correction of transverse discrepancies concomitant with treatment objectives in sagittal dimension in order to provide the patient with the most stable and functional result possible. Concomitant surgical correction of narrow palate require less treatment time, treatment cost and post-treatment relapse is less than to do only orthodontic therapy. This report is concerned with rapid palatal expansion by a combination of corticotomy and orthodontic treatment.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.3
• /
• pp.303-311
• /
• 1999

In adult patients, the corrections of their malocclusion may be more difficult and require longer treatment time due to thicker layer of cortical bone and reduced blood supply. Recently, various methods such as surgery, implant for anchorage and corticotomy have been tried to overcome these problems. Corticotomy is a surgical technique in which a fissure is made through the cortical bone that surrounds a tooth so that the tooth is embedded within a block of bone that is connected to adjacent blocks through only the medullary bone. Technique of corticotomy has been widely used for correction of maxillary transverse deficiency, but hasn't actively in other fields of orthodontics. We applied corticotomies in many types of orthodontic treatment and had satisfactory results. We suggested clinical application of corticotomy in adult orthodontics to reduce treatment period and to achieve better stability after orthodontic treatment.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.4
• /
• pp.320-328
• /
• 2006

Purpose: The aim of this study was to evaluate the effects of pterygomaxillary separation on dimensional changes of dental arch following surgically-assisted rapid maxillary expansion (SARME). Patients and Methods: Eighteen adults who had been treated by SARME for transverse maxillary deficiency from May 2000 to August 2005 were evaluated. Thirteen patients (Group 1) were treated with subtotal Le Fort I osteotomy including pterygomaxillary separation and anterior midpalatal osteotomy. The same operation was performed in five patients (Group 2) except pterygomaxillary separation. Dental study casts were taken before operation and after removal of expansion device. And then, skeletal and dental parameters were measured pre- and post-operatively. Results: 1. Changes of mean interdental width 1) In group 1, mean maxillary interdental width was increased 70%($47{\sim}99%$), 95%($84{\sim}115%$), and 77%($57{\sim}94%$) of total expansion on canine, first premolar, and first molar region, respectively after retention. 2) In group 2, mean maxillary interdental width was increased 77%($59{\sim}100%$), 78%($45{\sim}107%$), and 86%($57{\sim}116%$) of total expansion on canine, first premolar, and first molar region, respectively after retention. 3) There was a statistical difference between the change of interdental width of group 1 and group 2 at first premolar(p<0.05). 2. Changes of mean interalveolar width 1) In group 1, mean maxillary alveolar bone width was increased 66%($42{\sim}84%$), 74%($42{\sim}104%$), and 57%($31{\sim}78%$) of total expansion on canine, first premolar, and first molar region, respectively after retention. 2) In Group 2, mean maxillary alveolar bone width was increased 73%($55{\sim}98%$), 67%($36{\sim}89%$), and 59%($48{\sim}73%$) of total expansion on canine, first premolar, and first molar region, respectively after retention. 3) There were no statistical differences between group 1 and group 2 at each teeth area. Conclusion: These results suggest that SARME without pterygomaxillary separation may allow the relatively equal expansion at both anterior and posterior teeth area and most amounts of maxillary interdental expansions were acquired with the expansion of the maxilla by SARME.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.5
• /
• pp.390-398
• /
• 2005

Purpose: The aim of this study was to evaluate the skeletal and dentoalveolar dimensional changes following surgically-assisted rapid maxillary expansion (SARME). Patients & methods: Thirteen adults who had been treated by SARME for transverse maxillary deficiency from May 2000 to December 2003 were evaluated. The SARME procedure was the subtotal Le Fort I osteotomy combined with pterygomaxillary separation and anterior midpalatal osteotomy. Dental study casts and posteroanterior cephalometric radiographs were taken before operation, after removal of expansion device, and follow up period. Nasal cavity width, skeletal and dentoalveolar parameters were measured pre- and post-operatively. Results: 1. Mean nasal cavity width was increased 12%$(0{\sim}21%)$ of total expansion after retention. 2. Mean maxillary interdental width was increased 70%$(47{\sim}99%)$, 95%$(84{\sim}115%)$, and 77%$(57{\sim}94%)$ of total expansion in the canine, the first premolar, and the first molar region, respectively after retention. 3. Mean maxillary alveolar bone width was increased 66%$(42{\sim}84%)$, 74%$(42{\sim}94%)$, and 57%$(31{\sim}78%)$ of total expansion in the canine, the first premolar, and the first molar region, respectively after retention. 4. Mean palatal vault depth was decreased 1.3 mm ($0.5{\sim}2.0$ mm) after retention. 5. Mean interdental and alveolar bone width of the mandibular canine and intermolar width of mandible were slight increased as maxilla was expanded after retention. 6. There were statistical differences between preoperative and postoperative values of nasal cavity, all maxillary interdental and interalveolar widths, palatal vault depth, mandibular interdental and interalveolar width of canine(paired t-test, p<0.05). 7. The maxillary interdental and alveolar bone width were decreased approximately 25% of total expansion by relapse at follow up period. Conclusion: In conclusion, most amounts of maxillary interdental expansions were acquired with the expansion of the maxilla by SARME. For preventing the relapse, approximately 25% of the overexpansion was needed.

• Archives of Plastic Surgery
• /
• v.37 no.1
• /
• pp.31-36
• /
• 2010

Purpose: The primary goal of palatoplasty is to enable normal speech with harmonious growth of face. Some children who had palatoplasty display typical findings of transverse maxillary deficiency requiring orthodontic widening of the maxilla. Levi (2009) described a cleft palate repair coupled with pedicled buccal fat pad flaps to cover bone exposed areas of the hard palate. Hence we report clinical experiences of cleft palate repair using pedicled buccal fat pad flap. Methods: Four Veau class II and a Veau class I cleft palate patients underwent palatoplasty with buccal fat pad flap by single surgeon from April 2009 to August 2009. Two patients received 2-flap palatoplasty and three patients 1-flap palatoplasty, respectively. After the cleft palate repair, sharp mosquito scissors was placed in the superior buccal sulcus just lateral to the maxillary tuberosity and inserted directly through the mucosa resulting in buccal fat pad extrusion. The elevated flap was moved to cover mucoperiosteal defect in hard palatal area. Results: Five patients underwent primary palatoplasty using buccal fat pad flap. Flap harvest and inset took on average 9 minutes per flap. Mucosal epithelization took 18 days on average. No patients had complications related to the buccal fat pad flap. Conclusion: Buccal fat pad pedicled flap has significant potential to function as an added vascularized tissue layer in cleft palate repair and we can expect better growth of maxilla with this method although longer duration of follow-up was unavailable.

• The korean journal of orthodontics
• /
• v.52 no.5
• /
• pp.334-344
• /
• 2022

Objective: This study aimed to systematically analyze the effect and stability of miniscrew-assisted rapid palatal expansion (MARPE) to provide a reference for the clinical treatment of patients with maxillary transverse deficiency (MTD). Methods: We searched PubMed, Science Direct, Web of Science, Embase, Cochrane Library, CNKI, and Wanfang Database for relevant studies published before February 18, 2021 and selected them according to the eligibility criteria. The Cochrane Handbook for Systematic Reviews (version 5.1.0) criteria were used for the quality assessment of randomized controlled trials, while the scoring protocol of the methodological index for non-randomized studies was used for non-randomized controlled trials. Statistical analysis was performed using the RevMan5.3 software. Results: All the included studies showed a relatively high success rate of expansion. The changes in both the intermolar and alveolar widths after MARPE were statistically significant. MARPE exhibited greater skeletal expansion effects than did conventional RPE. The midpalatal suture was opened in parallel after MARPE. A small amount of relapse was observed 1 year after expansion. MARPE caused tooth inclination and a decrease in alveolar height, but it was less significant than in conventional RPE. Conclusions: MARPE may be an effective treatment modality for patients with MTD. It causes great transverse skeletal expansion in late adolescence. In comparison to conventional RPE, MARPE has lower detrimental periodontal effects and has certain clinical advantages.

• The korean journal of orthodontics
• /
• v.48 no.2
• /
• pp.81-89
• /
• 2018

Objective: The aim of this study was to evaluate the stress distribution and displacement of various craniofacial structures after nonsurgical rapid palatal expansion (RPE) with conventional (C-RPE), bone-borne (B-RPE), and miniscrew-assisted (MARPE) expanders for young adults using three-dimensional finite element analysis (3D FEA). Methods: Conventional, bone-borne, and miniscrew-assisted palatal expanders were designed to simulate expansion in a 3D FE model created from a 20-year-old human dry skull. Stress distribution and the displacement pattern for each circumaxillary suture and anchor tooth were calculated. Results: The results showed that C-RPE induced the greatest stress along the frontal process of the maxilla and around the anchor teeth, followed by the suture area, whereas B-RPE generated the greatest stress around the miniscrew, although the area was limited within the suture. Compared with the other appliances, MARPE caused relatively even stress distribution, decreased the stress on the buccal plate of the anchor teeth, and reduced tipping of the anchor teeth. Conclusions: The findings of this study suggest that the incorporation of miniscrews in RPE devices may contribute to force delivery to the sutures and a decrease in excessive stress on the buccal plate. Thus, MARPE may serve as an effective modality for the nonsurgical treatment of transverse maxillary deficiency in young adults.