• Smart Structures and Systems
• /
• v.33 no.2
• /
• pp.165-175
• /
• 2024

Rotating beams play a crucial role in representing complex mechanical components that are prevalent in vital sectors like energy and transportation industries. These components are susceptible to the initiation and propagation of cracks, posing a substantial risk to their structural integrity. This study presents a two-stage methodology for detecting the location and estimating the size of an open-edge transverse crack in a rotating Euler-Bernoulli beam with a uniform cross-section. Understanding the dynamic behavior of beams is vital for the effective design and evaluation of their operational performance. In this regard, modal parameters such as natural frequencies and eigenmodes are frequently employed to detect and identify damages in mechanical components. In this instance, the Frobenius method has been employed to determine the first two natural frequencies and corresponding eigenmodes associated with flapwise bending vibration. These calculations have been performed by solving the governing differential equation that describes the motion of the beam. Various parameters have been considered, such as rotational speed, beam slenderness, hub radius, and crack size and location. The effect of the crack has been replaced by a rotational spring whose stiffness represents the increase in local flexibility as a result of the damage presence. In the initial phase of the proposed methodology, a damage index utilizing the slope of the beam's eigenmode has been employed to estimate the location of the crack. After detecting the presence of damage, the size of the crack is determined using a Genetic Algorithm optimization technique. The ultimate goal of the proposed methodology is to enable the development of more suitable and reliable maintenance plans.

• Advances in materials Research
• /
• v.13 no.4
• /
• pp.299-319
• /
• 2024

Due to higher strength-to-weight ratio of composite laminates, they find uses in many weight-sensitive applications like aerospace, automobile and marine structures. From a reliability point of view, accurate prediction of failure of these structures is important. Due to the complexities in the manufacturing processes of composite laminates, there is a variation in the material properties and geometric parameters. Hence stochastic aspects are important while designing the composite laminates. Many existing works of composite laminate failure analysis are based on the deterministic approach but it is important to consider the randomness in the material properties, geometry and loading to predict accurate failure loads. In this paper the statistics of the ultimate failure load of the [0/θ]_s laminated composite plate (LCP) containing the edge crack and voids subjected to the tensile loading are presented in terms of the mean and coefficient of variance (COV). The objective is to better the efficacy of laminate failure by predicting the statistics of the ultimate failure load of LCP with random material, geometric and loading parameters. The stochastic analysis is done by using the extended finite element method (XFEM) combined with the second-order perturbation technique (SOPT). The ultimate failure load of the LCP is obtained by ply-by-ply failure analysis using the ply discount method combined with the Tsai-Wu failure criterion. The aim is to know the effect of the stacking sequence, crack length, crack angle, location of voids and number of voids on the mean and corresponding COV of the ultimate failure load of LCP is investigated. The results of the ultimate failure load obtained by the present method are in good agreement with the existing experimental and numerical results. It is observed that [0/θ]_s LCPs are very sensitive to the randomness in the crack length, applied load, transverse tensile strength of the laminate and modulus of elasticity of the material, so precise control of these parameters is important. The novelty of the present study is, the stochastic implementation in XFEM for the failure prediction of LCPs containing crack and voids.

• Journal of the Korea Concrete Institute
• /
• v.22 no.4
• /
• pp.489-498
• /
• 2010

The performance evaluation of reinforcement concrete structure is carried out as a function of the following performance influencing factors: (1) the strength of concrete, (2) longitudinal reinforcement, (3) transverse reinforcement, (4) aspect ratio, and (5) axial force. With various values of the five parameters, eigenvalue analysis and non-linear static analysis were performed to investigate the structural yield displacement, yield basis shear force, and static performance of ductility ratio. In addition, the performance evaluation is carried out according to the modified capacity spectrum method (FEMA-440) using the results of non-linear static analysis, and the effect of each parameter on performance point is analyzed. Based on the result of eigenvalue analysis and non-linear static analysis indicates, that the natural period and the ductility ratio are affected more by the structural properties than the material properties. In case of the analysis of the criterion of performance points, the effect of section shape is one of the important factors together with natural period and ductility ratio.

• The Journal of the Korean bone and joint tumor society
• /
• v.2 no.1
• /
• pp.18-26
• /
• 1996

We investigated the effect of deep-freezed, boiled and autoclaved autogenous long bone graft on the incorporation of the radial diaphyseal reconstruction in 30 rabbits by radiogram and histology for 8 weeks. Immediate histologic changes of 1cm of resected long bone treated by deep freezing, boiling and autoclaving in each 2 rabbits were also observed as control. Resected, boiled ($95^{\circ}C$ for 5 min.) and reimplanted bone was compared with resected, autoclaved ($131^{\circ}C$ for 5 min.) and reimplanted bone, and resected, deep freezed with liquid nitrogen for 5 minutes and thawing in saline and reimplanted bone in the reconstruction of bilateral radial defects in each of 8, and in total 24 adult rabbits. The results were as follows : 1. Immediate histologic changes showed that intracortical osteocytes in lacunae were partially necrotized and the cortex were faintly stained with they Masson trichrome stain in both boiled and deep freezed groups, while they completely necrotized and their cortex stained more weakly with Masson trichrome stain in autoclaved group which means less amount of collagen and protein in cortex of long bone. 2. Radiographies at 8 weeks showed complete union with more marked incorporation and external callus formation in all boiled and freezed groups, whereas there was delayed union in four of sixteen (25%) in autoclaved group. Histologically, at 8 weeks after boiled and freezed, more intense incorporation with new bone formation and neovascularization were observed, whereas transverse clefts consisted with delayed union in 4 cases of autoclaved group (25%) were observed at osteotomy site. Through these studies, the boilod and deeply freezed bones acted as an osteoinductive material as well as osteoconductive, but the autoclaved bone only as osteoconductive. Though boilod and deeply freezed bone showed higher osteogenic potentials than autoclaved bone, the necrotizing effect on cortical and boiled bone was inferior to that of autoclaved. Thus the deeply freezed bone can be used for the treatment of aggressive benign or less malignant bone tumor not involving cortical bone, but the autoclaved bone supplemented with bone graft for the treatment of malignant bone tumor involving cortex of long bone.

• The Journal of Korean Medicine
• /
• v.29 no.1
• /
• pp.1-6
• /
• 2008

Objective : To investigate the therapeutic effect of manual acupuncture at Siguan (four gates, bilateral LI4 and LR3) on suppression of gastrointestinal motility. Methods : A single blind, randomized, sham-acupuncture controlled, crossover study was conducted. Twenty healthy male subjects were admitted at hospital, and gastrointestinal motility suppression was induced by loperamide administration. Just after intake of 20 radio-markers, four gates or sham acupoint treatments were administered every 12 hours, 4 times over 48 hours. Gastrointestinal motility was evaluated by radiographic distribution of the radiomarkers at stomach or ileum, ascending, transverse, descending colon, sigmoid/rectum, and outside body at serial time points (0, 6, 12, 24, and 48 h). Results : Four gates acupuncture activated gastrointestinal movement as evidenced by significantly changed distributionof radio-makers at 6, 12, and 48 hours (P < 0.0001, P = 0.001, and P = 0.03, respectively) in Cochran-Mantel-Haenszel statistics. No serious adverse events occurred in either group. Conclusions : This study showed a scientific clinical relevance of four gates acupuncture to gastrointestinal disorders.

• The Korean Journal of Physiology
• /
• v.29 no.2
• /
• pp.279-289
• /
• 1995

This study was designed 1) to develop a hypertensive animal model in which the blood pressures (BPs) of symmetric regions (right and left upper extremities) are significantly different and 2) to test the effect of BP per se on the contractility and endothelium-dependent relaxation of vascular smooth muscle. Rabbits were anesthetized with sodium pentobarbital and ventilated with room air via animal respirator. The transverse aorta was exposed through the left second intercostal space and the lumen of the aorta was narrowed partially by ligation using 3-0 silk and a probe at a point between the origins of the brachiocephalic trunk and the left subclavian artery. Four to eight weeks postoperatively, BPs were measured in the carotid artery as the high BP area (proximal to coactation site) and in the femoral artery as the low BP area (distal to coarctation site). In the animal model, pressure-overload hypertension was developed and the BP of the right subclavian artery was higher than that of the left subclavian artery. The concentrations of circulating epinephrine, norepinephrine, angiotensin I, and angiotensin II were measured. The right and left subclavian arteries and their branches were used for isometric tension recording in organ baths and their responsiveness to phenylephrine, serotonin, acetylcholine, and sodium nitroprusside were examined. The BPs of carotid and femoral artery in control animals were $116{\pm} 12/75{\pm}9\;mmHg (mean ${\pm}SEM$) and $130{\pm}16/68{\pm}9\;mmHg$ respectively, while those of carotid and femoral artery in the hypetensive animals were $172{\pm}6/111{\pm}10\;mmHg$ and 136{\pm} 4/100 {\pm}9\;mmHg$ respectively. There were no significant differences in the concentrations of circulating epinephrine, norepinephrine, angiotensin I, and angiotensin II between controls and the animal models. No significant differences were found in the vascular sensitivities to phenylephrine and serotonin between the high pressure-exposed vessels and the low pressure-exposed vessels. However, the endothelium-dependent relaxation to acetylcholine and nitroprusside-induced relaxation showed significant differences between the high pressure-exposed and the low pressure-exposed subclavian arteries. From the above results, we suggest that the contractility of vascular smooth muscle is unchanged by the elevated pressure per se. However, the endothelium-dependent relaxation to acetylcholine and the nitroprusside-induced relaxation are attenuated by pressure.

• Ocean Systems Engineering
• /
• v.6 no.3
• /
• pp.245-264
• /
• 2016

The iterative boundary element method (IBEM) developed originally before for cavitating two-dimensional (2-D) and three-dimensional (3-D) hydrofoils moving under free surface is modified and applied to the case of 2-D (two-dimensional) airfoils and 3-D (three-dimensional) wings over water. The calculation of the steady-state flow characteristics of an inviscid, incompressible fluid past 2-D airfoils and 3-D wings above free water surface is of practical importance for air-assisted marine vehicles such as some racing boats including catamarans with hydrofoils and WIG (Wing-In-Ground) effect crafts. In the present paper, the effects of free surface both on 2-D airfoils and 3-D wings moving steadily over free water surface are investigated in detail. The iterative numerical method (IBEM) based on the Green's theorem allows separating the airfoil or wing problems and the free surface problem. Both the 2-D airfoil surface (or 3-D wing surface) and the free surface are modeled with constant strength dipole and constant strength source panels. While the kinematic boundary condition is applied on the airfoil surface or on the wing surface, the linearized kinematic-dynamic combined condition is applied on the free surface. The source strengths on the free surface are expressed in terms of perturbation potential by applying the linearized free surface conditions. No radiation condition is enforced for downstream boundary in 2-D airfoil and 3-D wing cases and transverse boundaries in only 3-D wing case. The method is first applied to 2-D NACA0004 airfoil with angle of attack of four degrees to validate the method. The effects of height of 2-D airfoil from free surface and Froude number on lift and drag coefficients are investigated. The method is also applied to NACA0015 airfoil for another validation with experiments in case of ground effect. The lift coefficient with different clearance values are compared with those of experiments. The numerical method is then applied to NACA0012 airfoil with the angle of attack of five degrees and the effects of Froude number and clearance on the lift and drag coefficients are discussed. The method is lastly applied to a rectangular 3-D wing and the effects of Froude number on wing performance have been investigated. The numerical results for wing moving under free surface have also been compared with those of the same wing moving above free surface. It has been found that the free surface can affect the wing performance significantly.

• Journal of Navigation and Port Research
• /
• v.30 no.3 s.109
• /
• pp.173-179
• /
• 2006

A number of perforated plates are utilized for the passage of the crew and the equipment, reducing weight and the arrangement of piping. Hull girders in double bottom and floor plates are the typical parts which have those plates in a ship structure, and the perforated plate is usually positioned at the place which has less loading without local strength problems. In the case of utilizing the plate inevitably at the place which has large strength, an opening of the plate has large effect on the buckling strength due to in-plane rigidity and ultimate strength. Therefore the assessments of the elastic buckling strength and the ultimate strength for the perforated plate are the essential requirements for determining the dimensions of the parts at the initial design stage. With above reason, a need of the reasonable assessments for the elastic buckling strength and the ultimate strength has evolved. The numerical series analysis with the consideration of the effect due to various aspect ratios and slenderness ratios were performed using finite element method in this research. Simple formulas for the design are also proposed from the above analysis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.5
• /
• pp.319-329
• /
• 2020

Among the bridges used in Korea, those that are more than 30 years old account for approximately 11% of the total bridges. Therefore, developing a seismic performance-evaluation method is necessary by considering the bridge age. Three composite steel-concrete box girder bridges with port, elastic-rubber, and lead-rubber bearings were selected, and a structural analysis model was developed using the OpenSEESs program. In this study, pier aging was reflected by the reduction in the area of the longitudinal and transverse rebars. Four conditions of 5%, 10%, 25%, and 50% in the degree of pier aging were used. As input earthquakes, 40 near-fault and far-field earthquakes were used, and the maximum displacement and maximum shear-force responses of the piers were obtained and compared. The result shows that as the aging degree increases, the pier strength decreases. Therefore, the pier displacement response increases. To analyze the effects of displacement response and shear resistance, displacement ratio D_ratio and shear-force ratio F_ratio were evaluated. The older the sample bridge is, the greater is the tendency of D_ratio to increase and the smaller is the tendency of F_ratio to decrease.

• Restorative Dentistry and Endodontics
• /
• v.13 no.2
• /
• pp.323-334
• /
• 1988

The purpose of this study was to observe the effect of dentin surface conditioners on the dentin surfaces. Freshly extracted human molars were used in this study. They were stored at $4^{\circ}C$ saline solution before experiment. The crown portions of the teeth were cut in various directions by means of wet diamond point to expose dentin which include transverse, vertical oblique, horizontal and oblique cut to the long axis (Fig. 1). Each tooth was then mounted with self curing acrylic resin in brass ring to expose the flattened dentin surfaces. Final finish was accomplished by grinding the dentin specimens with wet No. 180 and No. 600 grit silicon carbide abrasive paper until a 6.0mm in diameter on a dentin surface was exposed without pulp exposure. The specimens were divided into 9 groups according to the modes of dentin treatment procedure. The following surface treatments were applied on these preparation surfaces; Group 1: unetched (control group) after finish with No. 600 silicon carbide abrasive paper. Group 2: etched with 30% phosphoric acid for 60s Group 3: etched with 10-3 solution for 60s Group 4: Cleaned with 5% NaOCl for 30s Group 5: applied Dentin Adhesit Group 6: cleaned with 5% NaOCl followed by applying the Dentin Adhesit$^{(R)}$ Group 7: applied Photo Bond on the unetched dentin followed by applying the Photo Clearfil Bright Group 8: Etched with 30% phosphoric acid followed by applying Photo Bond and Photo Clearfil Bright Group 9: etched with 10-3 solution followed by applying Photo Bond and Photo Clearfil Bright All the specimens were stored in $37^{\circ}C$ under 50% relative humidity for 24 hours before observations. The specimens in 7, 8, and 9 group, omitting the group 1 to 6, were demineralized in 10% HCl for 10s in order to observe the resin tags. All the specimens in each group were then dried at room temperature. The dried specimens were ion coated with Eiko ion coater (Eiko-engineering Co.), and observed in Hitachi S-430 Scanning electron microscope (Hitachi, Co. Tokyo) at 15KV. The following results were obtained as follows; 1. The smear layers were still remained in group 1,2,4,5, and 6. 2. There is no effect of 5% NaOCl and 30% phosphoric acid on the changes of dentin morphology 3. The dentin treated with 10-3 solution, indicating the tubules opened when the smear layer and the dental plug dissolved. 4. In case of applying the bonding agents the resin tag was not formed at the deep area of dentinal tubules, but in case of applying the Dentin Adhesit$^{(R)}$ that was not.