• Journal of Distribution Science
• /
• v.6 no.1
• /
• pp.47-62
• /
• 2008

Joining the WTO in 2001, China became a number of the global economic system. China succeeded in vying to host Beijing 2008 Olympic Games and World Expo 2010 Shanghai. It is China's honor and opportunity to have high economic growth in the coming future. In 2007, the total cost of public logistics decreased by 18.2% than 2006 to 4540.6 billion RMB, accounting for 18.4% of the GDP. So, China logistics is a huge industry and a growing market full of charm. The statistic ratios of China's logistics and growth trends show us it is an important issue to build and run an effective logistics system. However, research on China's logistics systems and supply chain is lacked. This study is focus on the logistic location strategy in China including the study of factories and warehouses geographic strategy concerned with SCM. The core of this study is to propose a New Multi-Facilities Location Decision Model. This study banded the revised gravity center, the standard single facility location decision model(Gravity Center Model) and the transportation model into a new Multi-Facilities Location Decision Model. In addition, this study suggested the gravity center of population, the gravity center of each industry, the location decision graded-list of each industry of china using the gravity center model and the revised gravity center model. The new Multi-Facilities Location Decision Model proposed in this study can be used to solve the location decision problem of more than two facilities. And it can be used in the fields such as the location decision of production facility and service facility, the location of distribution and logistics, the location of broadcast and satellite communications, the location of wireless communication tower and so on.

• Journal of Korea Port Economic Association
• /
• v.27 no.4
• /
• pp.253-270
• /
• 2011

The problem of global warming faced a big turning point due to the adoption of "Kyoto protocol"in 1997. Therefore, by enacting "Act on Advancement of Integration and Streamlining of Distribution Business"and "green logistics partnership council"to reduce $CO_2$ emission, fulfillment of distribution work is comprehensively and effectively supported by Japan. In particular, the green management certification system, which promotes green management based on the independent and planned environmental measures of transportation service of harbor employers, warehouse operators, and trucking employers of logistics sector, is promoted. As such, the Japanese government is actively promoting the eco-friendly green logistics policy to reduce $CO_2$ emission in terms of the prevention of global warming by building the comprehensive and efficient logistics system. Therefore, this thesis studied the status of the green logistics policy of Japan where the eco-friendly logistics system is being built ahead of Korea and as a result, it presented the implications on the green logistics strategy which is eco-friendly and can be developed continuously, the development of eco-friendly green logistics industry, the introduction of green logistics certification system, Departmental roles and responsibility of administrative agencies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2385-2390
• /
• 2015

In the beginning run, urban railway had been required as transportation. But now days urban railway have stayed in the platform for long time, the platform is faced the problem that is improvement of environment as one of the living space. Thus, sliding automatic door on the basis of screen door have used in huge distribution market, hospital, restaurant and public office because it is comfortable that customer's convenience and entrance are controled. So screen door not only requires customer's convenience and safe, clean area and energy conservation but demands optimal design technology development of screen door system that is confirmed by element parts of design and confidence. In this paper, For secure confidence of screen door, after as modeling roller and frame's system, confirming the result for qualification of driving stiffness. And then it suggests that it is possible to increase performance and declines fraction defective of element's part.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.2
• /
• pp.107-112
• /
• 2013

In the paper, velocity controller of switching module and temperature controller for the high-voltage static var compensator are proposed. Because of the continuous increase in demand for electric power, transmission and distribution facilities of power plant are required. There is a bottleneck problem of transportation routes according to new construction and expansion of power transmission facilities. Therefore there are researches to maximize the utilization of existing facilities and to increase transmission capacity without new construction. The previous static var compensator detects voltage of input circuit of power, switches the SCR directly and generates switching noise. The proposed method increases switching velocity and decreases noise using switching control based on the voltage between both sides of SCR. Also the proposed method enhance the stability using realtime temperature control for heating of the system from increase of switching velocity. We experiment the velocity and temperature control of the proposed high-voltage static var compensator in the real environment and verify the performance of the proposed system by applying in the real field.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1575-1580
• /
• 2017

The electric vehicle business is important because it can reduce 30% of the fine dust generated in the metropolitan area and it can solve the air pollution problem by replacing automobile exhaust gas from an internal combustion engine with eco-friendly electric cars. For the construction of the electric charging station infrastructure, which is the core part of the electric car business, we focus to select the optimal location of the electric car charging station in Seoul. The goal of this paper is to utilize and analyze the traffic statistics of T-Map navigation users data and Seoul Metropolitan Transportation Policy Department to deploy the electric cars charging station with optimal location to increase the efficiency. In this paper, the proposed algorithm is composed of two parts of electric charging station selection. First, we analyze real traffic statistics and area. Second, we utilize T-Map navigation data distribution. To select optimal electric charging station location, we apply these two algorithms.

• Geomechanics and Engineering
• /
• v.29 no.3
• /
• pp.207-218
• /
• 2022

In submerged floating tunnels (SFTs), a next-generation maritime transportation infrastructure, the tunnel module floats in water due to buoyancy. For the effective and economical use of SFTs, connection with the ground is inevitable, but the stability of the shore connection is weak due to stress concentration caused by the displacement difference between the subsea bored tunnel and the SFT. The use of an elastic joint has been proposed as a solution to solve the stability problem, but it changes the dynamic characteristics of the SFT, such as natural frequency and mode shape. In this study, the finite element method (FEM) was used to simulate the elastic joints in shore connections, assuming that the ground is a hard rock without displacement. In addition, a small-scale model test was performed for FEM model validation. A parametric study was conducted on the resonance behavior such as the natural frequency change and velocity, stress, and reaction force distribution change of the SFT system by varying the joint stiffness under loading conditions of various frequencies and directions. The results indicated that the natural frequency of the SFT system increased as the stiffness of the elastic joint increased, and the risk of resonance was the highest in the low-frequency environment. Moreover, stress concentration was observed in both the SFT and the shore connection when resonance occurred in the vertical mode. The results of this study are expected to be utilized in the process of quantitative research such as designing elastic joints to prevent resonance in the future.

• The Journal of Society for e-Business Studies
• /
• v.27 no.2
• /
• pp.193-204
• /
• 2022

Smart card data is representative mobility data and can be used for policy development by analyzing public transportation usage behavior. This paper deals with the problem of classifying metro stations using metro usage patterns as one of these studies. Since the previous papers dealing with clustering of metro stations only considered traffic among usage behaviors, this paper proposes clustering considering traffic time as one of the complementary methods. Passengers at each station were classified into passengers arriving at work time, arriving at quitting time, leaving at work time, and leaving at quitting time, and then the estimated shape parameter was defined as the characteristic value of the station by modeling each transit time to Weibull distribution. And the characteristic vectors were clustered using the K-means clustering technique. As a result of the experiment, it was observed that station clustering considering pass time is not only similar to the clustering results of previous studies, but also enables more granular clustering.

• Journal of Korean Society of Transportation
• /
• v.32 no.4
• /
• pp.369-379
• /
• 2014

The Statistical regression model has been used to construct crash prediction models, despite its limitations in assuming data distribution and functional form. In response to the limitations associated with the statistical regression models, a few studies based on non-parametric methods such as neural networks have been proposed to develop crash prediction models. However, these models have a major limitation in that they work as black boxes, and therefore cannot be directly used to identify the relationships between crash frequency and crash factors. A genetic programming model can find a solution to a problem without any specified assumptions and remove the black box effect. Hence, this paper investigates the application of the genetic programming technique to develope the crash prediction model. The data collected from the Gyeongbu expressway during the past three years (2010-2012), were separated into straight and curve sections. The random forest technique was applied to select the important variables that affect crash occurrence. The genetic programming model was developed based on the variables that were selected by the random forest. To test the goodness of fit of the genetic programming model, the RMSE of each model was compared to that of the negative binomial regression model. The test results indicate that the goodness of fit of the genetic programming models is superior to that of the negative binomial models.

• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.61-71
• /
• 2003

Existent DDHV draws and is calculating K coefficient. D coefficient from sum of traffic volume two-directions time. There is difference of design order and actuality order, error of DDHV estimation value, problem of irregular change etc. of DDHV thereby. In this study, among traffic volume of each other independent two direction(going up, going down), decide design target order in the directional traffic volume, presented way(way) applying without separating K coefficient and D coefficient at the same time. The result were analysis about national highway permanent count point 360 points 30 orders by existing DDHV estimation value method(separation plan) analysis wave and following variation appear. - design order and actuality order are collision at 357 agencies(99.2%) - actuality order special quality : Measuring efficiency of average 80 orders, maximum 1,027 order, minimum 2 orders - error distribution of design order and actuality order : inside 10 hours is(30$\pm$10hour) 106 points(29.4%), 254 points(70.6%) more than 30 orders and $\pm$10 orders error occurrence be - DDHV estimation value : Average 8.4%, maximum 46.7% The other side, average 50 orders. error improvement effect of DDHV 8.4% was analysed that is at design hourly volume computation by inseparability method in case of AADT premises correct thing because inseparability plan agrees actuality order at whole agency with design order and measuring efficiency of DDHV estimation value is "0".t;0".uot;.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.95-105
• /
• 2003

Because the basic assumptions of deterministic user equilibrium assignment that all network users have perfect information of network condition and determine their routes without errors are known to be unrealistic, several stochastic assignment models have been proposed to relax this assumption. However. it is not easy to solve such stochastic assignment models due to the probability distribution they assume. Also. in order to avoid all path enumeration they restrict the number of feasible path set, thereby they can not preciously explain the travel behavior when the travel cost is varied in a network loading step. Another problem of the stochastic assignment models is stemmed from that they use heuristic approach in attaining optimal moving size, due to the difficulty for evaluation of their objective function. This paper presents a logit-based stochastic assignment model and its solution algorithm to cope with the problems above. We also provide a stochastic user equilibrium condition of the model. The model is based on path where all feasible paths are enumerated in advance. This kind of method needs a more computing demand for running the model compared to the link-based one. However, there are same advantages. It could describe the travel behavior more exactly, and too much computing time does not require than we expect, because we calculate the path set only one time in initial step Two numerical examples are also given in order to assess the model and to compare it with other methods.