• Journal of Korean Society of Steel Construction
• /
• v.27 no.1
• /
• pp.53-61
• /
• 2015

The tension type joint is a mechanically very efficient connection method, as it directly uses the load capacity of base metal or high tension bolt, the reduction of the number of drilling hole and fastening and the fatigue resistance. It is applied to the joint of girder and cross beam, horizontal joints of towers, beam to column joints, the secondary member joints of deck floor ends, and brackets. In this paper, static load tests for the T-type tension joint were conducted to investigate the structural behavior of the joint. The parameters were bolt diameter, flange thickness, and the reduction of clamping force of the joint. The failure modes and load capacity of joints and the effects of flange thickness, bolt diameter and clamping force were investigated.

• Geomechanics and Engineering
• /
• v.19 no.5
• /
• pp.463-472
• /
• 2019

The mode perturbation method (MPM) is suitable and efficient for solving the eigenvalue problem of a nonuniform soil deposit whose property varies with depth. However, results of the MPM do not always converge to the exact solution, when the variation of soil deposit property is discontinuous. This discontinuity is typical because soil is usually made up of sedimentary layers of different geologic materials. Based on the energy integral of the variational principle, a new mode perturbation method, the energy-based mode perturbation method (EMPM), is proposed to address the convergence of the perturbation solution on the natural frequencies and the corresponding mode shapes and is able to find solution whether the soil properties are continuous or not. First, the variational principle is used to transform the variable coefficient differential equation into an equivalent energy integral equation. Then, the natural mode shapes of the uniform shear beam with same height and boundary conditions are used as Ritz function. The EMPM transforms the energy integral equation into a set of nonlinear algebraic equations which significantly simplifies the eigenvalue solution of the soil layer with variable properties. Finally, the accuracy and convergence of this new method are illustrated with two case study examples. Numerical results show that the EMPM is more accurate and convergent than the MPM. As for the mode shapes of the uniform shear beam included in the EMPM, the additional 8 modes of vibration are sufficient in engineering applications.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2166-2178
• /
• 2010

The Korea Transportation Database (KTDB) is used to obtain data on the origin and destination (OD) of inter-city travel, which are currently used in railroad planning when estimating traffic demand. The KTDB employs the trip assignment method, whereby the total traffic volume researched for inter-city travel in Korea is divided into road, rail and air traffic, etc. However, as regards rail travel, the railroad stations are not identical to the existing zones or the connector has not been established because there are several stations in one zone as such, certain problems with the applicable methods have been identified. Therefore, estimates of the volume of railroad traffic using the KTDB display low reliability compared to other modes of transportation. In this study, these problems are reviewed and analyzed, and use of the aggregate model method to estimate the direct demand for rail travel is proposed in order to improve the reliability of estimation. In addition, a method of minimizing error in traffic demand estimation for the railroad field is proposed via an analysis of the relationship between the aggregate model and various social-economic indicators including population, distances, numbers of industrial employees, numbers of automobiles, and the extension of roads between cities.

• Journal of Korean Society of Transportation
• /
• v.29 no.2
• /
• pp.81-89
• /
• 2011

Trip distribution is the second step of the conventional travel demand estimation process, which connects trips between origin and destination, while transport mode choice is the third step of the process, which chooses transport mode among several modes serving for each origin-destination pair. Although these two steps have closely connected, they have been estimated independently each other in the estimation procedure. This paper presents an integrated model combining trip distribution and transport mode choice, and also presents its solution algorithm. The model integrates gravity model adopted for the trip distribution process with logit model employed for the mode choice process. The model would be expected to cope with the inconsistency issue existing in the conventional travel demand estimation procedure. This paper also presents an equilibrium condition, sensitivity of the model, and compares them with those of existing models.

• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.119-128
• /
• 2010

Mode choice behavior is associated with travelers' latent behavior that is an unobservable preference to travel behavior or mode characteristics. This paper specifically addresses the problem of unobservable factors, that is latent behavior, in mode choice models. Consideration of latent behavior in mode choice models reduces the errors that come from unobservable factors. In this study, the authors defined the latent variables that mean a quantitative latent behavior factors, and developed the combined RP/SP model with latent variables using the mode choice behavior survey data. The data has traveler's revealed preference of existent modes along the Han River and stated preference of new water transit on the Han River. Also, The data has travelers' latent behavior. Latent variables were defined by factor analysis using the latent behaviour data. In conclusion, it is significant that the relationship between traveler's latent behavior and mode choice behavior. In addition, the goodness-of-fit of the mode choice models with latent variables are better than the model without latent variables.

• Steel and Composite Structures
• /
• v.26 no.6
• /
• pp.793-808
• /
• 2018

In this study, the seismic performance of the connections between L-shaped columns composed of concrete-filled steel tubes (L-CFST columns) and H-beams used in high-rise steel frame structures was investigated. Seven full-scale specimens were tested under quasi-static cyclic loading. The variables studied in the tests included the joint type, the axial compression ratio, the presence of concrete, the width-to-thickness ratio and the internal extension length of the side plates. The hysteretic response, strength degradation, stiffness degradation, ductility, plastic rotation capacity, energy dissipation capacity and the strain distribution were evaluated at different load cycles. The test results indicated that both the corner and exterior joint specimens failed due to local buckling and crack within the beam flange adjacent to the end of the side plates. However, the failure modes of the interior joint specimens primarily included local buckling and crack at the end plates and curved corners of the beam flange. A design method was proposed for the flexural capacity of the end plate connection in the interior joint. Good agreement was observed between the theoretical and test results of both the yield and ultimate flexural capacity of the end plate connection.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.133-143
• /
• 2007

Previous studies on the transit assignment hardly show its achievement in research but have many limitations not only in theory but also in practice. This paper presents an integrated transit assignment model taking into account cost functions of multiple modes, such as auto, bus and subway, which represent an integrated network. An integrated transit network including cost functions and in-vehicle congestion needs to be developed. In addition, a link fare calculation model needs to be developed and applied to the model to calculate path travel costs. Based on these sub-models, a path-based traffic assignment model, which considers in-vehicle congestion and an integrated distance-based fare system in the integrated traffic network, is developed.

• Steel and Composite Structures
• /
• v.34 no.4
• /
• pp.499-509
• /
• 2020

The purpose of this paper is to investigate the degradation law of stiffness of steel-concrete composite beams after certain fatigue loads. First, six test beams with stud connectors were designed and fabricated for static and fatigue tests. The resultant failure modes under different fatigue loading cycles were compared. And an analysis was performed for the variations in the load-deflection curves, residual deflections and relative slips of the composite beams during fatigue loading. Then, the correlations among the stiffness degradation of each test beam, the residual deflection and relative slip growth during the fatigue test were investigated, in order to clarify the primary reasons for the stiffness degradation of the composite beams. Finally, based on the stiffness degradation function under fatigue loading, a calculation model for the residual stiffness of composite beams in response to fatigue loading cycles was established by parameter fitting. The results show that the stiffness of composite beams undergoes irreversible degradation under fatigue loading. And stiffness degradation is associated with the macrobehavior of material fatigue damage and shear connection degradation. In addition, the stiffness degradation of the composite beams exhibit S-shaped monotonic decreasing trends with fatigue cycles. The general agreement between the calculation model and experiment shows good applicability of the proposed model for specific beam size and fatigue load parameters. Moreover, the research results provide a method for establishing a stiffness degradation model for composite beams after fatigue loading.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.485-492
• /
• 2010

Intelligent Transport System(ITS) has been studied in various systems, such as road environment information offering, vehicle short-range wireless/wire communication, vehicle collision preventing and pedestrian safety offering systems. Related to this, the USN technology based on the sensing accuracy for motorists and pedestrians safety, the information reliability, the maintenance and convenience for Sensor Network is highlighted. This study uses various sensors to construct USN to the road, and connect it to the developed RSU so it collects the real-time road environment information and offers it to OBU and Traffic Control Surveillance Center with Road Weather Information System. RSU collects roadside information for driver's safety and analyzes it to offer IP and beacon service according to the service priority to OBU & upper layer terminal. In the upper layer terminal it is developed the IP based Settop Box application program to offer the urban traffic information & road environment, and environment sensor error, etc. Finally, RWIS develops the real-time collection of roadside information to complement the driver's safety to the intelligent traffic system, and presents various service modes with technology convergence.

• Smart Structures and Systems
• /
• v.23 no.6
• /
• pp.653-667
• /
• 2019

Using cross-ties to connect cables together when forming a cable network is regarded as an efficient method of mitigating cable vibrations. Cross-ties have been extended and fixed on bridge decks or towers in some engineering applications. However, the dynamics of this kind of system need to be further studied, and the effects of extending cross-links to bridge decks/towers on the modal response of the system should be assessed in detail. In this paper, a system of two cables connected by an inter-supported cross-link with another lower cross-link extended to the ground is proposed and analyzed. The characteristic equation of the system is derived, and some limiting solutions in closed form of the system are derived. Roots of cable system with special configurations are also discussed, attention being given to the case when the two cables are identical. A predictable mode behavior was found when the stiffness of inter-connection cross-link and the cross-link extended to the ground were the same. The vector of mode energy distribution and the degree of mode localization index are proposed so as to distinguish global and local modes. The change of mode behaviors is further discussed in the case when the two cables are not identical. Effects of cross-link stiffness, cross-link location, mass-tension ratio, cable length ratio and frequency ratio on $1^{st}$ mode frequency and mode shape are addressed.