• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.778-784
• /
• 2017

In this paper, we propose wired and wireless distributed control systems designed to improve the freight logistics efficiency and verify wired distributed control systems. The verification condition required that 50 cargo vehicles be connected and operated to travel 21 km from Busan Sinhang station to Jinlye Station at an average speed of about 100km/h. The verification results show that the traction output and braking output of the control and controlled cars are dispersed by the wired distributed control system. The application is expected to more than double the efficiency of the logistics compared to the existing freight transportation system. However, in the case of the wired distributed control system, cable installation and maintenance are difficult, and it is impossible to change the combination of freight vehicles. Through the verification of the wired distributed control system, the applicability of distributed control systems to freight vehicles in Korea was confirmed and the system was further developed to produce a wireless distributed control system. In order to apply the wireless distributed control system, a propagation environment analysis for the ISM band was performed in the testbed and, as a result, it was confirmed that Wifi technology using the ISM band could be utilized. In order to use the WDP (Wireless Distributed Power) devices newly installed in the target vehicles, the transmission / reception control signals associated with the propulsion / braking / total control devices are defined. In the case of wireless distributed control systems, the convenience of their application and operation is guaranteed, but reliability and emergency safety measures should because of the dependence of the control of the vehicle on radio signals.

• Journal of Korean Society of Transportation
• /
• v.36 no.2
• /
• pp.67-85
• /
• 2018

Vehicle platooning through wireless communication and automated driving technology has become realized. Platooning is a technique in which several vehicles travel at regular intervals while maintaining a minimum safety distance. Truck platooning is of keen interest because it contributes to preventing truck crashes and reducing vehicle emissions, in addition to the increase in truck flow capacity. However, it should be noted that interactions between vehicle platoons and adjacent manually-driven vehicles (MV) significantly give an impact on the performance of traffic flow. In particular, when vehicles entering from on-ramp attempt to merge into the mainstream of freeway, proper interactions by adjusting platoon size and inter-platoon spacing are required to maximize traffic performance. This study developed a methodology for establishing operational strategies for truck platoonings on freeway on-ramp areas. Average speed and conflict rate were used as measure of effectiveness (MOE) to evaluate operational efficiency and safety. Microscopic traffic simulation experiments using VISSIM were conducted to evaluate the effectiveness of various platooning scenarios. A decision making process for selecting better platoon operations to satisfy operations and safety requirements was proposed. It was revealed that a platoon operating scenario with 50m inter-platoon spacing and the platoon consisting of 6 vehicles outperformed other scenarios. The proposed methodology would effectively support the realization of novel traffic management concepts in the era of automated driving environments.

• Journal of Korean Society of Transportation
• /
• v.33 no.6
• /
• pp.575-583
• /
• 2015

The Korea Transport Institute (KOTI) builds the origin and destination(O-D) trip data with relatively smaller zone size such as Eup, Myeon, Dong administration unit districts in metropolitan area. Otherwise, O-D trip data was built by bigger size of traffic analysis zone(TAZ) such as Si, Gun, Gu administration unit districts for rural area. In some cases, it is needed to divide a zone into several sub-zones for rural area in order to analyze travel distribution pattern in detail for a certain highway and rail project. The study suggested a method to estimate O-D trips for sub-zones in the larger-size zones in rural area. Two different distribution models, direct demand model and gravity model, were calibrated for sub-zone's intra-zonal O-D trip pattern with metropolitan area O-D data which has smaller zone-size (sub-zone) data categorized by low, middle and high population density. The calibration results were compared between the two models. The gravity model with impedance function of power functional form was selected with better explanation for all groups in the metropolitan area. The adjusted $R^2$ was 0.7426, 0.6456 and 0.7194 for low, middle and high population density group, respectively. The suggested O-D trip estimating method is expected to produce enhanced trip patterns with sub-divided small zones.

• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2013

Lane closure in freeway work zone due to maintenance and repair of freeway facilities results in abrupt change of traffic flow. Sudden change of traffic flow results strong interactions among vehicles, and reduces capacity compared to the ordinary traffic condition. Such capacity reduction is likely to cause congestion, traffic queues, and economic loss cost. This study aims to determine the base capacity for a short-term freeway work zone that can be used to establish a work zone schedule in advance without any traffic impact. First, the research collected detector data and schedule data of road works on all freeways in Korea. Second, the research determined 23 study sites finding the capacity values of work zone after matching two kinds of data. All study sites had varying characteristics regarding traffic flow being adjacent to work zone during road works. The capacity values were reviewed in terms of lane closure configuration, the types of work, and design speed. Finally, research proposed capacity values for a short-term freeway work zone with the design speeds of 100 kph, 120 kph and 1,700 pcphpl, 1,750 pcphpl, respectively.

• Journal of Digital Convergence
• /
• v.18 no.6
• /
• pp.65-79
• /
• 2020

With the rapid development of China's economy, the aviation industry, as an important part of transportation services, has undoubtedly achieved rapid development. However, there is hardly any academic work that was based on the development of the top airlines in the Chinese airline industry. Hence, this study provides empirical research that takes into account the longitudinal development of the top 20 airlines in China from 2009 to 2018. The throughput volumes (cargo and passenger) of the airlines were analyzed by concentration indicators, namely the concentration ratio (CR), the Herfindahl- Hirschman index (HHI), the Gini coefficient, and the shift-share analysis (SSA). In this paper, the top 20 airlines have been analyzed in terms of the passenger and cargo throughput from 2009 to 2018. The calculation results of CR6, HHI and the Gini coefficient show that the airlines were extremely deconcentrated. In addition, by comparing the ABSGR of passenger and cargo throughput, it is shown that China's aviation industry is dominated by four airlines- Air China, China Eastern Airlines, China Southern Airlines and Hainan Airlines. In the future study, it is necessary to explore growth strategies to find niche markets for passenger and cargo transportation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.30-38
• /
• 2016

Shuttle-Based Storage/Retrieval System (SBS/RS) is relatively new to industry. The system is in the category of Automated Storage/Retrieval System (AS/RS), but it is different in that the SBS/RS uses shuttles as Storage/Retrieval (SR) machine instead using a stacker crane. The shuttles are assigned to each tier on multi-tier system and operated for pick-up or drop-off order. Since the system can handle multiple orders simultaneously, it can provide much higher throughput than that of general AS/RS with single stocker crane. Thus, this new system is well fit to recent tendency of increasing small quantity batch production and orders. One of the drawback of this system is that it needs a lot of investment to set up. The efficient operation of the system would be one of the critical matters to increase economic efficiency of capital investment. In this study, we focused on the dwell point policy for shuttles to find efficient way of operating the system. There are four basic policies for the dwell point and we had simulation-based experiment for two different scenarios based on the speed of the shuttle and inter-arrival time of the loads coming to the system combined with four different policies. As it was mentioned above, this SBS/RS relatively new to the field and there is no such experiment shown on previous research and the study of dwell point policy for this SBS/RS could provide the direct comparison of each policy with different hardware specification; the capability of the system. The policy that achieves most efficient operation among the given environment is proposed and the usability of the system is discussed.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.492-498
• /
• 2015

With the rapid growth of technologies and demand of remotely piloted aircraft systems (RPASs), integration of such systems into the existing airspace is becoming an issue in many countries. To assess the impact of integrated operations of manned and remotely piloted aircraft (RPA), it is necessary to perform Human-in-The-Loop (HiTL) simulations of likely situations with an integrated simulation system. This paper defines several operational concepts for the integrated simulation. Several probable scenarios were developed including a traffic pattern at a small airport and an altitude maneuver at a route crossing. HiTL simulations were performed according to the developed scenarios. The simulation results are analyzed focusing on the impacts of different communication, safety, performance, and human machine interface (HMI) characteristics of RPA.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.57-67
• /
• 2008

Loading zone is necessary to central business district(CBD) due to freight trucks coming into inner city. Currently truck drivers in metropolitan area are forced to illegally park their freight trucks on the roads close to the business facilities because there is no or few loading zones available in the CBD. This situation would bring into traffic congestion and even might block local roads in the CBD. This study reviews the existing improvement plans in city logistics, and examines delivery characteristics related to freight trucks and drivers in Seomyeon, the central downtown of Busan. Also it conducts a location planning for on-street loading/unloading bay using a technical method for arranging loading space. This research estimated the number of parking and stop bays for truck's operation using queueing theory based on truck-service rate and arrival rate, and found locations with the minimum resistance function values for freight movement in arranging on-street loading/unloading bays.

• Journal of Korean Society of Transportation
• /
• v.30 no.4
• /
• pp.85-94
• /
• 2012

Modern freight transport pursues not only the reduction of logistic costs but also aims at green logistics and efficient shipments. In order to accomplish these goals, various policies regarding the multimodal shipment and stopover to logistic facilities have widely been made. Such situation requires changes in existing methods for analyzing freight demand. However, the reality is that a reliable freight demand forecast is limited, since in the transport research field there is no robust freight demand model that can accommodate transshipments at logistic facilities. This study suggested a novel method to analyze freight demand, which can consider transshipments in multi-modal networks. Also, the applicability of this method was discussed through an example test.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.23-35
• /
• 2017

Work zone traffic control is of keen interest because both traffic operations and safety performances are directly affected by traffic management methods. In particular, work zone traffic on two-lane roads needs to be managed in more efficient and safer manners due to its unique characteristics of alternative right-of-way assignment. This study developed a dynamic control algorithm that can be used for real-time operations of two-lane work zone traffic. The performance of the developed algorithm was evaluated by VISSIM microscopic traffic simulator. An applied programming interface (API) based program was developed to plug-in the control algorithm onto the simulator. The results demonstrated the feasibility of the proposed control algorithm for two-lane work zone.