• Journal of Environmental Health Sciences
• /
• v.50 no.2
• /
• pp.81-82
• /
• 2024

Urban air mobility (UAM) is emerging as an innovative transportation solution for cities. However, the potential noise impact on urban life must be carefully examined. Continuous exposure to UAM noise, with its unique frequency characteristics and temporal variability, may adversely affect citizens' health by causing sleep disorders, cardiovascular disease, and cognitive impairmenet, particularly in children. NASA has formed a UAM Noise Working Group to study this issue comprehensively. In Korea, the Seoul Metropolitan Government's UAM demonstration project is expected to accelerate related research and development. Scientific analysis, including noise measurement, prediction modeling, and health impact assessment, must be prioritized. Measures to minimize noise should be established based on this evidence, such as optimizing flight modes, developing noise reduction technologies, and establishing new noise management standards. Transparency and social consensus are crucial throughout this process. Expert review and open communication with civil society are necessary to address related concerns. Sharing demonstration project results and providing opportunities to experience UAM noise through digital twin simulations can help address public concerns and build social consensus. Proactively and scientifically tackling noise issues is essential for the sustainable development and successful integration of UAM into daily life.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.17-33
• /
• 2005

Highway design speed is a very important design element which determines highway design level. When determining highway design speed, one would estimate it utilizing the most likelihood of design speed and vehicle operating speed relationship. Existing operating speed prediction models only include highway geometric characteristics and their impacts on speed, which usually can not consider the impact of highway design speed on surrounding roadway environment and land use pattern. If this happens, excessive highway construction cost and huge environmental impact can occur. In this research project, a new vehicle operating speed prediction model was developed which can reflect the effect of surrounding roadway environment into vehicle speed prediction. The followings are the research findings : Firstly, highway terrain types and land use pattern on national roads were classified and integrated into drivers' visual recognition pattern. This was performed using a data management software. Secondly, the developed highway terrain types and land use pattern were related to vehicle speeds and it was found that there were significant statistical differences among vehicle speed for each different terrain and land use pattern. Thirdly. the General Linear Model analysis was employed to analyze the effects of highway geometric features, terrain types, and land use patterns. For two-lane highway and four-lane highway tested in this research project, it was found that R squares were 0.67 and 0.85, respectively. Additionally an optimal highway design speed range table, based on this research project. was proposed for practical use. This table can be reliably used on South Korean national road design, but discretion is required for applying this table to other types of highways including provincial roads and municipal roads.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.33-39
• /
• 2017

This study identified a candidate area and route for construction of a hub & spork system for coastal passenger ships. For this purpose, the characteristics of the hierarchy structure of other transportation and the operating system of coastal passenger ships were analyzed. Evaluation factors for selecting alternative areas and routes for the construction project were then extracted. Secondly, the relative importance of these evaluation factors for alternative routes were calculated using the Analytic Hierarchy Process (AHP) method. Finally, the importance of these evaluation items and quality of the alternative areas and routes were considered to select a primary candidate area and route. Therefore, four evaluation items such as the number of passenger-ship routes, the number of passengers, the number of cars, and the number of residences were extracted, and the Mokpo area was selected as the target area. In addition, four evaluation items such as he number of islanders, the number of local governments, geographical conditions and passenger ship operators were extracted, and the Yeonggwang route was selected as priority candidates for this construction project. Meanwhile, for the expansive implementation, step-by-step promotion is needed along with the expansion of terminal facilities, the securing of large ships, and the introduction of a semi-public system for coastal passenger ships.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.224-239
• /
• 2023

C-ITS (Cooperative-Intelligent Transportation System) refers to user safety-oriented technology and systems that provide forward traffic situation information based on a two-way wireless communication technology between vehicles or between vehicles and infrastructure. Since the Daejeon-Sejong pilot project in 2016, the C-ITS infrastructure has been installed at various locations to provide C-ITS safety services through highway and local government demonstration projects. In this study, a methodology was developed to verify the effectiveness of the warning information using individual vehicle data collected through the Gwangju Metropolitan City C-ITS demonstration project. The analysis of the effectiveness was largely divided into driving behavior impact analysis and environmental analysis. Compliance analysis and driving safety evaluation were performed for the driving impact analysis. In addition, to supplement the inadequate collection of Probe Vehicle Data (PVD) collected during the C-ITS demonstration project, Digital Tacho Graph ( DTG ) data was additionally collected and used for effect analysis. The results of the compliance analysis showed that drivers displayed reduced driving behavior in response to warning information based on a sufficient number of valid samples. Also, the results of calculating and analyzing driving safety indicators, such as jerk and acceleration noise, revealed that driving safety was improved due to the provision of warning information.

• Computers and Concrete
• /
• v.2 no.3
• /
• pp.203-214
• /
• 2005

In the Part 1 paper (Gawin, et al. 2005) some experimental results concerning micro-structural tests, permeability measurements and stress-strain tests of four types of High Performance Concrete, exposed to elevated temperatures (up to $700^{\circ}C$) are presented and discussed. On the basis of these experimental results parameters of the constitutive relationships describing influence of damage and temperature upon material intrinsic permeability at high temperature were determined. In this paper the effects of various formulations of damage-permeability coupling on results of computer simulations are analysed and compared with the results obtained by means of the previously proposed approach, that does not take into account the thermo-chemical concrete damage directly. Numerical solutions are obtained using the recently developed fully coupled model of hygro-thermal and damage phenomena in concrete at elevated temperatures. High temperature effects are considered by means of temperature and pressure dependence of several material parameters. Based on the mathematical model, the computer code HITECOSP was developed. Material parameters of the model were measured by several European laboratories, which participated in the "HITECO" research project. A model problem, concerning hygro-thermal behaviour and degradation of a HPC structure during fire, is solved. The influence of two different constitutive descriptions of the concrete permeability changes at high temperature, including thermo-chemical and mechanical damage effects, upon the results of computer simulations is analysed and discussed.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.167-177
• /
• 2010

This study proposes a methodology for assessing the improvement of network connectivity of transport hubs. Extending a previously developed model that measures the connectivity of a node in transportation networks, we define two quantities called the supplied connectivity and the experienced connectivity. Using these quantities, we provide a systematic procedure for analyzing the network connectivity of a transport hub and also suggest criteria for determining whether a given project is effective in improving the network connectivity of the transport hub. The application of the methodology to a test site produces reasonable results, and as such it is expected that the methodology can be used for various transport hubs in the national road network. Once enough data from the application of the methodology are accumulated, a further study on the level of service in terms of network connectivity needs to be followed.

• Journal of the Society of Disaster Information
• /
• v.10 no.1
• /
• pp.49-60
• /
• 2014

For the demand analysis of Metropolitan Train Express project, the catchment area of station should be reevaluated considering the journey speed of it. In this paper, we estimated travel mode choice model using stated preference data including Seoul metropolitan express train and compared the parameters of access/egress travel time between existing metro and Seoul metropolitan express train. The parameter of Seoul metropolitan express train is 2.5 times smaller than that of existing metro. Consequently, the catchment area can be expanded in same proportion. It can be concluded that the result of demand forecasting can be increased by 10% accommodating the expanded catchment area.

• Journal of Environmental Science International
• /
• v.25 no.10
• /
• pp.1381-1387
• /
• 2016

This study aims to establish baseline data for sustainable monitoring by applying the green city index (GCI), which is set up to evaluate the city level, to the city of Gangneung-si, which was designated as a pilot city for the Low-carbon Green Growth City project by the Ministry of Land, Infrastructure, and Transportation. The GCI was applied in the framework of European systems, while considering the social and economic status of Korea. Indicators from 7 areas-$CO_2$, energy, building, transportation, water, waste, and quality of atmosphere were analyzed, except for qualitative indicators. Results indicate that total $CO_2$ emissions were 30.8 tons per capita, or 2.2 tons per one million units of real GDP. The total final energy consumption was 0.231 TOE/capita, or 0.317 TOE per one million units of real GDP. The percentage of total energy derived from renewable resources was 0.41% and energy consumption by the building was $433.5Mwh/1,000m^2$. The total percentage of the working population travelling to work daily by public transportation (limited to bus) was 19%. Further, the total annual water consumption was $99m^3/capita$, and the water lost in the water distribution system was $0.057m^3/capita/day$. The total annual waste collected was 0.0077 ton per capita, The annual mean emission were 0.014 ppm/day for $NO_2$, 0.005 ppm/day for $SO_2$, and 0.019 ppm/day for $O_3$. The annual mean for PM10 emissions was $39{\mu}g/m^3/day$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.122-134
• /
• 2020

To improve traffic congestion, reduce fuel consumption, and improve the stability of truck operations, truck platooning, in which several trucks are organized in a single platoon, is being actively researched globally. Compared to the operation of a single truck, the operation of a truck platoon requires more caution before the actual operation because an accident of one vehicle in the platoon can lead to an accident with all the vehicles in the platoon. Therefore, this study examined the types of trucks and cargo suitable for truck platooning to prevent safety accidents. The review showed that a closed-van-type truck is appropriate for truck platooning to prevent falling objects during driving. In the case of cargo types, it is necessary to exclude liquids and dangerous goods defined in related laws from truck platooning.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.225-233
• /
• 2006

Creating more efficient and effective intermodal transportation service in Northeast range is a critical issue because of more increased trade volume & demand for intermodal service in the world market and geographical barriers associated with goods transportation, especially in Korea, China and Japan. This study examines the possibility of Rail-ferry in Northest area which can provide each countries mutual economical and logistical satisfaction.